2N® Access Unit M RFID 13.56 MHz

Order number: 02909-001

This version of the 2N® Access Unit M RFID reader can read most cards at a frequency of 13.56 MHz. It is suitable for companies which prefer traditional RFID technology. The reader supports NFC technology, so employees who don’t want to wear a card can use their mobile phone to gain access. Administer a unit remotely via the secure web interface or in the 2N® Access Commander software. Datasheets (US)

Request information

Technical Parameters
Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE 802.3af (Class 0–12.95 W)
Interfaces
LAN 10/100BASE-TX with Auto-MDIX; RJ-45 male (9.5 ft pigtail)
Recommended cabling Cat-5e or better
Active switch output 8 to 12 V DC/max 600 mA
Passive switch NO/NC relay, 30V 1A AC/DC
Inputs 2 inputs – in passive / active mode(-30 VDC to + 30 VDC)
OFF = OPEN or Uin > 1.5 V
ON = CLOSED or Uin < 1.5 V
Tamper switch native part of the 2N Access Unit M
Audio buzzer, 1 W/8ohm
Supported protocols DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies 125kHz and 13.56MHz variant
125 kHz EM4xxx
13.56 MHz reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key)
reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
Mechanical Properties
Frame tempered glass with rugged plastic
Operating temperature -40°F to + 140°F
Storage temperature -40°F to +158°F
Operating relative humidity 10%-95% (non-condensing)
Dimensions 1.97 (W) x 5.24 (H) x 1.06 (D) inch
Flush installation box:
1.57 (W) x 5 (H) x 2.68 (D) inch
Surface mount box:
1.06 (W) x 5.28 (H) x 2.05 (D) inch
Weight max 1,1 pounds
Cover rating IP55 and IK07
Show more