Firmware 4.7.1

New functions: - Parallel network connection support via Ethernet and Wi-Fi (Network Co-Existence)    * Optimum solution for combined installations with separated networks for intercom communication (typically via Ethernet) and integration/home automation (typically via Wi-Fi)    * Default network setting option for Internet connection    * Requires the 2N® Indoor Touch 2.0 Wi-Fi version (Part Nos. 91378376/01670-001, 91378376WH/01671-001) - 2N® IP Style support including high-resolution video reception - Option to differentiate the unlocking button in the active call by a lock icon for door unlocking or a lift icon for allowing floor lift access - Direct door opening control option by the output relay closing based on a doorbell button pressing notification

Innovations: - Do Not Disturb (DND) mode with optional automatic call rejection at absence - Optional hiding of multiple lock icons for door opening - "Device Name" has been renamed to "Device ID" for easier setting of 2N IP intercom calls (device:Device_ID) - "Device Name" has been added for an unambiguous identification of devices the 2N® Network Scanner and 2N® Access Commander products - New icons for the supported 2N and Axis devices - Modified input / output configuration settings

Corrections: - Automatic reconnection to the Wi-Fi network after device restart - Touch display sensitivity and responsiveness - Compatibility with the Axis intercoms - Increased TTL value for multicast communication packets - Language mutations - Stability optimization - Security corrections

This software contains the additionally licensed solution 2N® Meeting Room version 1.4.0.

2N® IP Mobile version 4.7.1 requires firmware version 2.30 or higher for the 2N IP intercoms.