2N® 2Wire
2N® 2Wire is a set of two convertor units that lets you connect any IP device installed at locations with no IP infrastructure to your network. Connect the device, such as an IP intercom, to one unit and a switch to the other unit. Then connect both convertor units to each other using the existing analogue wiring. This will transmit audio and video as well as supply power.
- Ethernet including PoE over 2 wires
- Long reach
- Up to four sets per installation
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Ethernet including PoE over 2 wiresConnect any IP device using a two-wire or coaxial cable, even in an analogue environment, or a site with limited IP infrastructure.
-
Long reachPowering the IP-connected devices via PoE is possible up to a distance of 220m, twice the maximum Ethernet specification cable length.
-
Up to four sets per installationYou can connect up to four pairs of 2N® 2Wire convertor units to a single switch. This means you can connect an intercom to several answering units as well as an IP camera.
-
Easy installationNo more configuring! At each end of the cable you just plug in one 2N® 2Wire unit and connect at least one of them to a power source.
-
Robust aluminium housingThanks to its aluminium housing the 2N® 2Wire converter is rugged and resistant to mechanical damage.
-
Utilize existing cabling2N® 2Wire enables you to make use of existing wiring. You won’t have to lay new cables or do construction work.
-
ReliabilityThe converter will not let you down. It is significantly more reliable, in comparison with alternatives, such as a WiFi connection.
-
Power supply and connectorsThe pack includes an adapter with a US/UK/EU plug of your choice and high-quality connectors which prevent the cables from falling out.
Show more
Technical Parameters
| Ethernet Interface | |
| Connector type: | RJ45 |
| Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible |
| Installation requirements | |
| Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
| Impedance: | 25Ω to 100Ω |
| Transfer range: | max. 220m with Cat 6 |
| Number: | max. of 4 sets of convertor units per non-configurable switch |
| Transfer method | |
| Access method: | CSMA/CA and TDMA |
| Modulation method: | Windowed OFDM |
| Frequency band: | 1.8MHz to 30MHz |
| LED indicator lights | |
| Power supply: | Blue – power on |
| BNC: | Green – connection on |
| PoE: | Green – connection on |
| Electrical power supply | |
| AC input: | 100~240V AC, 50~60Hz |
| DC output: | 48V DC / 0.84A~1.3A |
| Mechanical properties | |
| Dimensions: | 40 x 40 x 75mm (h x w x d) |
| Weight: | 120g |
| Material: | extruded aluminium |
| Operating temperature: | -10°C – 50°C |
| Storage temperature: | -30°C – 70°C |
Show more
Technical area
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Technical Parameters
| Ethernet Interface | |
| Connector type: | RJ45 |
| Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible |
| Installation requirements | |
| Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
| Impedance: | 25Ω to 100Ω |
| Transfer range: | max. 220m with Cat 6 |
| Number: | max. of 4 sets of convertor units per non-configurable switch |
| Transfer method | |
| Access method: | CSMA/CA and TDMA |
| Modulation method: | Windowed OFDM |
| Frequency band: | 1.8MHz to 30MHz |
| LED indicator lights | |
| Power supply: | Blue – power on |
| BNC: | Green – connection on |
| PoE: | Green – connection on |
| Electrical power supply | |
| AC input: | 100~240V AC, 50~60Hz |
| DC output: | 48V DC / 0.84A~1.3A |
| Mechanical properties | |
| Dimensions: | 40 x 40 x 75mm (h x w x d) |
| Weight: | 120g |
| Material: | extruded aluminium |
| Operating temperature: | -10°C – 50°C |
| Storage temperature: | -30°C – 70°C |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Ethernet including PoE over 2 wiresConnect any IP device using a two-wire or coaxial cable, even in an analogue environment, or a site with limited IP infrastructure.
- Long reachPowering the IP-connected devices via PoE is possible up to a distance of 220m, twice the maximum Ethernet specification cable length.
- Up to four sets per installationYou can connect up to four pairs of 2N® 2Wire convertor units to a single switch. This means you can connect an intercom to several answering units as well as an IP camera.
- Easy installationNo more configuring! At each end of the cable you just plug in one 2N® 2Wire unit and connect at least one of them to a power source.
- Robust aluminium housingThanks to its aluminium housing the 2N® 2Wire converter is rugged and resistant to mechanical damage.
- Utilize existing cabling2N® 2Wire enables you to make use of existing wiring. You won’t have to lay new cables or do construction work.
- ReliabilityThe converter will not let you down. It is significantly more reliable, in comparison with alternatives, such as a WiFi connection.
- Power supply and connectorsThe pack includes an adapter with a US/UK/EU plug of your choice and high-quality connectors which prevent the cables from falling out.
Show more
Technical Parameters
| Ethernet Interface | |
| Connector type: | RJ45 |
| Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible |
| Installation requirements | |
| Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
| Impedance: | 25Ω to 100Ω |
| Transfer range: | max. 220m with Cat 6 |
| Number: | max. of 4 sets of convertor units per non-configurable switch |
| Transfer method | |
| Access method: | CSMA/CA and TDMA |
| Modulation method: | Windowed OFDM |
| Frequency band: | 1.8MHz to 30MHz |
| LED indicator lights | |
| Power supply: | Blue – power on |
| BNC: | Green – connection on |
| PoE: | Green – connection on |
| Electrical power supply | |
| AC input: | 100~240V AC, 50~60Hz |
| DC output: | 48V DC / 0.84A~1.3A |
| Mechanical properties | |
| Dimensions: | 40 x 40 x 75mm (h x w x d) |
| Weight: | 120g |
| Material: | extruded aluminium |
| Operating temperature: | -10°C – 50°C |
| Storage temperature: | -30°C – 70°C |
Show more
