2N® Access Unit M Touch Keypad & RFID
Order number: 9161161
Great for projects with two-factor authentication. During working hours, employees swipe their RFID cards. Outside these hours, employees must also enter a PIN code. The reader is also great for scenarios when you generate one-off access codes for visitors. The keypad is backlit, so you can install it in dark places. The 2N® Access Unit M Touch Keypad & RFID can read cards with frequencies of 125 kHz and 13.56 MHz. Datasheets (EN)
Technical Parameters
| Power supply | |
| Type | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100 BASE-TX Auto-MDIX, RJ-45 male (2,9m pigtail) |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 600 mA |
| Passive switch | NO/NC relay, 30V 1A AC/DC |
| Inputs | 2 inputs – in passive / active mode(-30 VDC to + 30 VDC) |
| OFF = OPEN or Uin > 1.5 V | |
| ON = CLOSED or Uin < 1.5 V | |
| Tamper switch | native part of the 2N Access Unit M |
| Audio | buzzer, 1 W/8ohm |
| Supported protocols | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| RFID Card Reader | |
| Supported frequencies | 125kHz and 13.56MHz variant |
| 125 kHz | EM4xxx |
| 13.56 MHz | reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
| reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
| Touch Keypad | |
| Technology | capacitive touch technology |
| high touch layer sensitivity (0.1pF) | |
| Reliability | regular automatic calibration (SmartSence Auto-tunning) |
| does not detect false touches on wet surface | |
| Signalling | configurable backlight intensity |
| indication using multicoloured LEDs | |
| acoustic response for every keypad touch | |
| Mechanical Properties | |
| Frame | tempered glass with rugged plastic |
| Operating temperature | -40°C to +60°C |
| Storage temperature | -40°C to +70°C |
| Operating relative humidity | 10%-95% (non-condensing) |
| Dimensions | 50 (W) x 133 (H) x 27 (D) mm |
| Flush installation box: | |
| 40 (W) x 127 (H) x 68 (D) mm | |
| Surface mount box: | |
| 27 (W) x 134 (H) x 52 (D) mm | |
| Weight | max 0.5 kg |
| Cover rating | IP55 and IK07 |
Show more