2N® SIP Speaker
Take advantage of the 2N® SIP Speaker for playback of live or pre-recorded announcements. This enduring speaker offers a fully-featured audio system with SIP protocol support. What’s more, it doesn’t need any additional HW or SW investment, e.g. a computer with supporting applications.
- Live and pre-recorded announcements
- Scheduled announcements
- Server-less solution
- Technical area
- SW Applications
- Sales Area
Features & Benefits
Live and pre-recorded announcementsBroadcast live or pre-recorded announcements. Not only from an IP phone or SIP microphone console but when using an IP PBX, even from your mobile phone.
Scheduled announcementsThis innovative loudspeaker also has the functionality for advanced scheduling. You can thus easily prepare a schedule of reporting, separately for each zone.
Informacast protocol support2N® SIP Speaker supports Informacast protocol. Thanks to this you will be able to play the spoken word or sound recording even from Cisco devices.
Server-less solutions2N® SIP Speaker is a comprehensive audio solution, with no need of a server. It saves you buying hardware.
Powerful amplifierIntegral to the speaker is a 2N® SIP Audio Converter with built-in powerful amplifier rated at 2x10W.
Simple installation and configurationAll you have to do is connect the speaker to the existing LAN/WAN network. The device can then be configured via its own web interface.
Connection of an add-on speakerAn additional wall-mounted speaker can easily be connected to the 2N® SIP Speaker. You thus cover a greater area in the installation.
Backup proxy serverIn critical situations, you’ll appreciate the backup proxy server that allows you to make announcements even in case of a failure or malfunction of the PBX.
Integration into VSM systemsThanks to ONVIF support, you can easily integrate the device into video management systems. You can thus immediately react to an incident with an announcement.
|Output:||10W (PoE) / 12W (12V)|
|Sound pressure:||100dB (SPLmax)|
|Frequency range:||75Hz – 20KHz|
|Harmonic distortion:||0.05% @ 1kHz|
|Audio codecs:||G.711 (PCMA, PCMU), G.729 (Annex A, B), G.722, L16/16kHz|
|Output for add-on speakers|
|Impedance (output):||1 x 4 Ohm (10W) PoE|
|1 x 8 Ohm (10W) PoE|
|1 x 4 Ohm (18W) external power supply|
|1 x 8 Ohm (12W) external power supply|
|Impedance (output):||2 x 4 Ohm (2x5W) PoE|
|2 x 8 Ohm (2x5W) PoE|
|2 x 4 Ohm (2x10W) external power supply|
|2 x 8 Ohm (2x9W) external power supply|
|SIP, ONVIF S|
|Dimensions (h/w/d):||250 x 176 x 143mm|
|External power supply:||12V DC / 2A|
|Power over Ethernet:||PoE IEEE 802.3af|
|RJ-45 connector on rear panel, 10/100BASE-TX with Auto-MDIX|
2N® SIP Speaker Variants
Where to Buy
- Installation Manual (EN) - 2N® SIP Speaker
- Configuration Manual (EN) - 2N IP Intercoms, 2N® SIP Audio Converter, 2N® SIP Speaker
- Interoperability Manual (EN) - 2N IP Intercoms, 2N® SIP Audio Converter, 2N® SIP Speaker
- Automation Manual (EN) - 2N IP Intercoms, 2N® SIP Audio Converter, 2N® SIP Speaker, 2N IP Access Control Units
- HTTP API Manual (EN) - 2N IP Intercoms, 2N® SIP Audio Converter, 2N® SIP Speaker, 2N IP Access Control Units
- Declaration of Conformity (EN) - 2N® SIP Speaker
- Product Models for Autodesk Revit (EN) - IP Audio
- Complete Product Support (EN) - 2N IP Audio Systems