2N Access Unit 2.0
Вам нужно стильное считывающее устройство контроля за доступом для вашего проекта? Все жильцы элитных жилых комплексом будут в восторге от 2N Access Unit 2.0. Выберите современный доступ с помощью мобильного телефона или через сканирование отпечатков пальцев. Отдаете предпочтение традиционным методам? Мы также предлагаем вам сканер RFID-карт или клавиатуру. Не можете определиться? Тогда выберите комбинацию сразу нескольких методов в одном устройстве. Однако не ищите контроллеры в нашем портфолио, ведь они уже являются неотъемлемой частью каждого считывающего устройства. Показать в 3D
- Идеально подходит для проектов в сфере недвижимости
- Самая быстрая технология Bluetooth
- Вам не нужен контроллер
- О продукте
- Для инженеров
- Аксессуары
- ПО
- Для дилеров
Свойства
-
Идеально подходит для проектов в сфере недвижимостиСогласовывайте дизайн домофонов и считывающих устройств. Предложите вашему клиенту не только надежную, но также стильную систему контроля за доступом. Выберите черную или никелевую рамку.
-
Самая быстрая технология BluetoothОткрыть дверь с помощью нашей технологии WaveKey быстрее, чем провести по карте RFID. Двигайтесь в ногу со временем и предложите быстрый, безопасный и удобный способ доступа.
-
Вам не нужен контроллерНаши считывающие устройства являются умными. Не тратьте время на поиски места для размещения контроллера или на распутывание кабелей.
-
Быстрая установка и дистанционное управлениеВы сможете справится с установкой всего за 4 минуты. Поставьте на место UTP-кабель и подключите считывающее устройство к замку. Вы сможете дистанционно управлять системой через защищенное облако и сэкономить время на вызовах.
-
Монтаж заподлицо или установка на стеклоСчитывающее устройство, установленное заподлицо, выступает на 5 мм и выглядит элегантно. Конечно же, его можно установить и на поверхности. А если вы не хотите сверлить стену, приклейте считывающее устройство к стеклянной поверхности.
-
Вневременное решениеИзменения в проекте больше не заставят вас врасплох. Добавляйте и удаляйте оборудование по своему усмотрению. Вы даже можете вернуться к старой установке спустя годы и добавить другие продукты.
Technical Parameters
Interfaces | |
Power supply: | PoE and/or 12 V/1 A DC |
PoE: | 802.3af (Class 0–12.95 W) |
LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
(2N® Access Unit Bluetooth has terminal block or pigtail RJ-45) | |
Recommended cabling: | Cat-5e or better |
Active switch output: | 8 to 12 V DC/max 600 mA |
Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
(2N® Access Unit Bluetooth has 3 inputs) | |
OFF = open or Uin> 1.5 V | |
ON = short-circuit or Uin< 1.5 V | |
Tamper switch: | native part of the 2N Access Unit 2.0 |
Audio: | buzzer (97dBA) |
Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
Bluetooth Reader | |
Version: | compatible with Bluetooth 5.0 LE |
Range: | (short - typically up to 3m*, long - typically up to 10m*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
Security: | RSA-1024 and AES-128 encryption |
RX sensitivity: Mode: |
up to -93 dBm touch, tap in app |
Mobile Application Support | |
Android 6.0 and higher, iOS 12.0 and higher | |
RFID Card Reader | |
Supported frequencies | 125 kHz variant |
13.56 MHz variant | |
125 kHz and 13.56 MHz variant | |
Supported card types | card type compatibility depends on Order No. |
125 kHz | EM4xxx |
HID Prox – versions with 125 kHz support and S in Order No. Only | |
13.56 MHz | ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
Secured 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
reads PACs ID (HID iClass cards with SIO object) | |
Touch Keypad | |
Technology: | capacitive touch technology |
high touch layer sensitivity (0.1pF) | |
Reliability: | regular automatic calibration (SmartSence Auto-tunning) |
does not detect false touches on wet surface | |
Signalling: | configurable backlight intensity |
indication using multicoloured LEDs | |
acoustic response for every keypad touch |
Fingerprint Reader | |
Sensor: | optical sensor protected by resistant glass |
Reliability: | algorithm for fake fingerprint detection |
Resistance: | resistant to water and dust |
Signalling: | acoustic and multicoloured LEDs |
Sensing area: | large with dimensions of 15.24 x 20.32 mm |
Certification: | certified according to FBI standard |
Mechanical Properties | |
Frame: | robust zinc cast frame with surface finish (nickel and black color) |
Operating temperature: | -40°C to +60°C |
(2N® Access Unit 2.0 Fingerprint Reader -20°C to +55°C) | |
Storage temperature: | -40°C to +70°C |
Operating relative humidity: | 10%-95% (non-condensing) |
Dimensions | |
Wall (surface) mounting frame: | 1 module: 107 (W) x 130 (H) x 28 (D) mm |
Flush mounting frame: | 1 module: 130 (W) x 153 (H) x 5 (D) mm |
Flush mounting box (minimum hole): | 1 module: 108 (W) x 131 (H) x 45 (D) mm |
Weight: | max 0.8 kg |
Cover rating: | IP54 and IK08 |
Extension Modules | |
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, I/O module, Wiegand, etc. |
Создайте проект вместе с 2N Project Designer
Просто укажите ваши требования, и наш интуитивный дизайнер проектов поможет вам выбрать подходящие продукты.
Представление 2N Access Units 2.0
FAQ
Technical Parameters
Interfaces | |
Power supply: | PoE and/or 12 V/1 A DC |
PoE: | 802.3af (Class 0–12.95 W) |
LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
(2N® Access Unit Bluetooth has terminal block or pigtail RJ-45) | |
Recommended cabling: | Cat-5e or better |
Active switch output: | 8 to 12 V DC/max 600 mA |
Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
(2N® Access Unit Bluetooth has 3 inputs) | |
OFF = open or Uin> 1.5 V | |
ON = short-circuit or Uin< 1.5 V | |
Tamper switch: | native part of the 2N Access Unit 2.0 |
Audio: | buzzer (97dBA) |
Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
Bluetooth Reader | |
Version: | compatible with Bluetooth 5.0 LE |
Range: | (short - typically up to 3m*, long - typically up to 10m*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
Security: | RSA-1024 and AES-128 encryption |
RX sensitivity: Mode: | up to -93 dBm touch, tap in app |
Mobile Application Support | |
Android 6.0 and higher, iOS 12.0 and higher | |
RFID Card Reader | |
Supported frequencies | 125 kHz variant |
13.56 MHz variant | |
125 kHz and 13.56 MHz variant | |
Supported card types | card type compatibility depends on Order No. |
125 kHz | EM4xxx |
HID Prox – versions with 125 kHz support and S in Order No. Only | |
13.56 MHz | ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
Secured 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
reads PACs ID (HID iClass cards with SIO object) | |
Touch Keypad | |
Technology: | capacitive touch technology |
high touch layer sensitivity (0.1pF) | |
Reliability: | regular automatic calibration (SmartSence Auto-tunning) |
does not detect false touches on wet surface | |
Signalling: | configurable backlight intensity |
indication using multicoloured LEDs | |
acoustic response for every keypad touch |
Fingerprint Reader | |
Sensor: | optical sensor protected by resistant glass |
Reliability: | algorithm for fake fingerprint detection |
Resistance: | resistant to water and dust |
Signalling: | acoustic and multicoloured LEDs |
Sensing area: | large with dimensions of 15.24 x 20.32 mm |
Certification: | certified according to FBI standard |
Mechanical Properties | |
Frame: | robust zinc cast frame with surface finish (nickel and black color) |
Operating temperature: | -40°C to +60°C |
(2N® Access Unit 2.0 Fingerprint Reader -20°C to +55°C) | |
Storage temperature: | -40°C to +70°C |
Operating relative humidity: | 10%-95% (non-condensing) |
Dimensions | |
Wall (surface) mounting frame: | 1 module: 107 (W) x 130 (H) x 28 (D) mm |
Flush mounting frame: | 1 module: 130 (W) x 153 (H) x 5 (D) mm |
Flush mounting box (minimum hole): | 1 module: 108 (W) x 131 (H) x 45 (D) mm |
Weight: | max 0.8 kg |
Cover rating: | IP54 and IK08 |
Extension Modules | |
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, I/O module, Wiegand, etc. |
Запишитесь на техническое обучение
Аргументы для продажи
- Идеально подходит для проектов в сфере недвижимостиСогласовывайте дизайн домофонов и считывающих устройств. Предложите вашему клиенту не только надежную, но также стильную систему контроля за доступом. Выберите черную или никелевую рамку.
- Самая быстрая технология BluetoothОткрыть дверь с помощью нашей технологии WaveKey быстрее, чем провести по карте RFID. Двигайтесь в ногу со временем и предложите быстрый, безопасный и удобный способ доступа.
- Вам не нужен контроллерНаши считывающие устройства являются умными. Не тратьте время на поиски места для размещения контроллера или на распутывание кабелей.
- Быстрая установка и дистанционное управлениеВы сможете справится с установкой всего за 4 минуты. Поставьте на место UTP-кабель и подключите считывающее устройство к замку. Вы сможете дистанционно управлять системой через защищенное облако и сэкономить время на вызовах.
- Монтаж заподлицо или установка на стеклоСчитывающее устройство, установленное заподлицо, выступает на 5 мм и выглядит элегантно. Конечно же, его можно установить и на поверхности. А если вы не хотите сверлить стену, приклейте считывающее устройство к стеклянной поверхности.
- Вневременное решениеИзменения в проекте больше не заставят вас врасплох. Добавляйте и удаляйте оборудование по своему усмотрению. Вы даже можете вернуться к старой установке спустя годы и добавить другие продукты.
Создайте проект вместе с 2N Project Designer
Просто укажите ваши требования, и наш интуитивный дизайнер проектов поможет вам выбрать подходящие продукты.
Technical Parameters
Interfaces | |
Power supply: | PoE and/or 12 V/1 A DC |
PoE: | 802.3af (Class 0–12.95 W) |
LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
(2N® Access Unit Bluetooth has terminal block or pigtail RJ-45) | |
Recommended cabling: | Cat-5e or better |
Active switch output: | 8 to 12 V DC/max 600 mA |
Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
(2N® Access Unit Bluetooth has 3 inputs) | |
OFF = open or Uin> 1.5 V | |
ON = short-circuit or Uin< 1.5 V | |
Tamper switch: | native part of the 2N Access Unit 2.0 |
Audio: | buzzer (97dBA) |
Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
Bluetooth Reader | |
Version: | compatible with Bluetooth 5.0 LE |
Range: | (short - typically up to 3m*, long - typically up to 10m*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
Security: | RSA-1024 and AES-128 encryption |
RX sensitivity: Mode: | up to -93 dBm touch, tap in app |
Mobile Application Support | |
Android 6.0 and higher, iOS 12.0 and higher | |
RFID Card Reader | |
Supported frequencies | 125 kHz variant |
13.56 MHz variant | |
125 kHz and 13.56 MHz variant | |
Supported card types | card type compatibility depends on Order No. |
125 kHz | EM4xxx |
HID Prox – versions with 125 kHz support and S in Order No. Only | |
13.56 MHz | ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
Secured 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
reads PACs ID (HID iClass cards with SIO object) | |
Touch Keypad | |
Technology: | capacitive touch technology |
high touch layer sensitivity (0.1pF) | |
Reliability: | regular automatic calibration (SmartSence Auto-tunning) |
does not detect false touches on wet surface | |
Signalling: | configurable backlight intensity |
indication using multicoloured LEDs | |
acoustic response for every keypad touch |
Fingerprint Reader | |
Sensor: | optical sensor protected by resistant glass |
Reliability: | algorithm for fake fingerprint detection |
Resistance: | resistant to water and dust |
Signalling: | acoustic and multicoloured LEDs |
Sensing area: | large with dimensions of 15.24 x 20.32 mm |
Certification: | certified according to FBI standard |
Mechanical Properties | |
Frame: | robust zinc cast frame with surface finish (nickel and black color) |
Operating temperature: | -40°C to +60°C |
(2N® Access Unit 2.0 Fingerprint Reader -20°C to +55°C) | |
Storage temperature: | -40°C to +70°C |
Operating relative humidity: | 10%-95% (non-condensing) |
Dimensions | |
Wall (surface) mounting frame: | 1 module: 107 (W) x 130 (H) x 28 (D) mm |
Flush mounting frame: | 1 module: 130 (W) x 153 (H) x 5 (D) mm |
Flush mounting box (minimum hole): | 1 module: 108 (W) x 131 (H) x 45 (D) mm |
Weight: | max 0.8 kg |
Cover rating: | IP54 and IK08 |
Extension Modules | |
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, I/O module, Wiegand, etc. |