Telephony / Dialing
The Telephony / Dialing tab helps you set parameters for dialing calls and outgoing calls.
Time to dial – allows you to set the amount of time for which the device waits for the next dialing. When this timeout has elapsed, the device will begin to set up a call.
Outgoing Calls – allows you to set the outgoing call type:
“Disabled” – outgoing calls are barred.
“SIP, Voice” – a combination of outgoing SIP and voice calls is allowed. Primarily, SIP call connections are used. If the device is not registered with SIP, it is possible to make voice calls.
“Voice” – outgoing voice calls are only allowed.
“SIP” – outgoing SIP calls are only allowed.
Note
Voice calls are transmitted using VoLTE if available and enabled. If VoLTE is unavailable or disabled, voice calls are transmitted using the GSM technology (as CS calls).