Suporte ao produto Conversa interna 2N

2N OS version 3.2.0 for 2N Answering Units includes the following changes

New Functions and Improvements

• Enabled simultaneous use of both network interfaces on Indoor View Wi-Fi, configurable via `Settings > Advanced Settings`. One interface must be selected as the default route for all outbound traffic (e.g., Internet access). Traffic specifically targeting the other interface's subnet will still use that interface.
• Added support for SHA-256 / RFC 8760 to SIP.
• Implemented a network test for 2N Clip 2wire-IP, accessible via `Settings > Device Management > Network Quality Test`.
• Improved the phone number creation dialog for better usability.

Essential Corrections

• Improved configuration import speed and stability.
• Updated several internal libraries.
• Important bug fixes.

b1792062bbbd55371eaeb3b65512d8bbc23facd20804596d8c1caac645086632

2N OS version 3.1.0 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 3.1.x

• Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Customization > Audio > Startup and Network States Signalization`.
• It may be necessary to refresh the webpage to access the login screen when updating from older firmware because this version generates new device certificates.

New Functions and Improvements

• The Control Center feature has been significantly expanded.
  
  • It now supports the following widgets: HTTP requests, Clock, Weather, Direct Call, and Notification Center.
  • Widgets now come in more sizes, and the grid density has increased to allow for more placement options.
  • Please note that this feature is not yet available in the new web interface.

Essential Corrections

• SIP registration should no longer get stuck in an unregistered state.
• A voicemail message is no longer played in SIP calls after an unlock if the call was not answered first.
• Fixed a rare issue that prevented SIP registration to My2N.
• Updated several internal libraries.
• Other corrections and fixes.

8dc3795129c464bc0dd61ed793ee55477fbd1d2f3f468344ad32d6f7391f351b

2N OS version 3.0.2 for 2N Answering Units includes the following changes

Important update notice

• If you are updating from version 3.0.0, the new web interface cannot download firmware from the update server. Update the device using the old web interface or manually upload a newer firmware file.

Essential Corrections

• Fixed an issue that prevented downloading a new firmware from the update server via the new web interface. As a workaround when updating from version 3.0.0, use the old web interface or manually upload a newer firmware file to the device.
• Important bug fixes.

2N OS version 3.0.0 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 3.0.x

• For security reasons, network settings can no longer be modified using 2N Network Scanner.
• All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
• Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
• In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

Introducing the MVP of our new graphical interface

• We are excited to deliver the first Minimum Viable Product of our redesigned graphical interface. This initial release brings several impactful improvements that make everyday work smoother and more intuitive. Among the most notable additions are guided wizards, an enhanced search experience, and other usability upgrades aimed at significantly improving overall user interaction.
• Because this is an MVP, some features are still in development. We will continue to refine, expand, and optimize the interface over the coming updates to ensure it reaches its full potential as quickly as possible.
• If you’re interested in learning how you can support the ongoing development of the new interface and share your feedback with us, please visit the following link: https://www.2n.com/-/media/Files/Web/downloads/Introducing-the-New-2N-Web-Interface

New Functions and Improvements

• Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
• Added support for Blind Assistance Mode during incoming calls. In this mode, all controls—both physical buttons and the display—perform identical actions. A short press answers an incoming call or ends an active call, while a long press unlocks the door once the call is connected. This mode is intended for visually impaired users and should not be used together with Screen Lock.
• STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
• Added support for the Japanese language in the display UI of Answering Units and IP Style.
• The custom language name defined in the translation file is now displayed in the Display UI instead of the generic "Custom" label.

Essential Corrections

• Updated several internal libraries.
• Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
• A voicemail message is no longer played after a successful door unlock if the call was not answered.
• Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
• Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
• Other corrections and fixes.

da9a324d8c54a62a9c929288badf203955b3b999ef07ee7e4dbd9865cf8920f4

2N OS version 2.49.1 for 2N Answering Units includes the following changes

Essential Corrections

• Updated an internal library containing critical vulnerabilities.
• Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
• Important bug fixes.

2N OS version 2.49.0 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 2.49.x

• Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
• All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
• Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
• In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

New Functions and Improvements

• The administrator account now accepts "root" as a valid username as well.
• AXIS Camera Station integration has been significantly improved:
• The ACS tab in the web interface is now renamed to AXIS.
• AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
• After the initial login to the web interface, the "root" username can also be used for ACS access.
• An optional dedicated ACS account is now available.
• If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
• If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
• If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
• 2N IP Utility can now also be used to configure IP settings after the default password has been changed.
• Indoor View now includes an optional Control Center screen, providing access to additional HTTP commands and widgets such as date and time. It can be enabled and customized under Services > Control Center. This feature allows you to define which screen appears when the device wakes—either the classic home screen or the customizable Control Center. The second screen remains accessible with a simple swipe.
• A background image that is common to both the Home Screen and Control Center can be uploaded via Hardware > Display > Background Image.
• Native integration with Microsoft Teams has been added, allowing bidirectional calling with our devices and enabling door unlocking directly from the Teams client. Configuration is available via Services > Integration > MS Teams.
• A firewall has been added the following devices: Answering Units, Access Unit 2.0, and Access Unit M.

Essential Corrections

• Updated several internal libraries.
• Increased stability of Indoor View during repeated calls.
• Syslog now correctly logs initial packets after reboot.
• Improved overall SIP performance and stability.
• Important bug fixes.

af6fda20d90c8effba130401261d62ea4b8ecac611351139c74da8c1032de47c

2N OS version 2.48.1 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 2.48.x

• All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
• Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
• In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

New Functions and Improvements

• Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR.
• All SIP accounts now support additional backup proxy and registrar servers.
• Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default.
• Cameras assigned to a device in Indoor View can now be shown as the default instead of the device’s internal camera. Third-party cameras can be added via Hardware > Cameras, and the display behavior adjusted under Directory > Devices > device detail > Cameras.

Essential Corrections

• Improved certificate handling.
• Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection.
• SIP unregistration now works correctly with non-RFC-compliant User Agent Servers.
• Removed certain unnecessary syslog messages.
• Improved formatting of exported Directory CSV files.
• SIP authentication passwords can now be up to 255 characters in length.
• DNS request lengths can now be up to 255 characters.
• Improved stability of Indoor View.
• RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios.
• Fixed device crashes caused by missing Origin fields in SDP offers.
• SRTP media is now correctly offered in the ACK response when using delayed SDP negotiation enforced via options.
• When SRTP is re-negotiated during a RE-INVITE, the newly established encryption key is now properly applied to outgoing media streams.
• Improved stability of the G.729 codec.
• Important bug fixes.

e316e1e1586b0cd0597706be70bf509688904d3b06e513ceab47e9386bbb4d09

2N OS version 3.2.0 for 2N Answering Units includes the following changes

New Functions and Improvements

• Enabled simultaneous use of both network interfaces on Indoor View Wi-Fi, configurable via `Settings > Advanced Settings`. One interface must be selected as the default route for all outbound traffic (e.g., Internet access). Traffic specifically targeting the other interface's subnet will still use that interface.
• Added support for SHA-256 / RFC 8760 to SIP.
• Implemented a network test for 2N Clip 2wire-IP, accessible via `Settings > Device Management > Network Quality Test`.
• Improved the phone number creation dialog for better usability.

Essential Corrections

• Improved configuration import speed and stability.
• Updated several internal libraries.
• Important bug fixes.

b1792062bbbd55371eaeb3b65512d8bbc23facd20804596d8c1caac645086632

2N OS version 3.1.0 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 3.1.x

• Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Customization > Audio > Startup and Network States Signalization`.
• It may be necessary to refresh the webpage to access the login screen when updating from older firmware because this version generates new device certificates.

New Functions and Improvements

• The Control Center feature has been significantly expanded.
  
  • It now supports the following widgets: HTTP requests, Clock, Weather, Direct Call, and Notification Center.
  • Widgets now come in more sizes, and the grid density has increased to allow for more placement options.
  • Please note that this feature is not yet available in the new web interface.

Essential Corrections

• SIP registration should no longer get stuck in an unregistered state.
• A voicemail message is no longer played in SIP calls after an unlock if the call was not answered first.
• Fixed a rare issue that prevented SIP registration to My2N.
• Updated several internal libraries.
• Other corrections and fixes.

8dc3795129c464bc0dd61ed793ee55477fbd1d2f3f468344ad32d6f7391f351b

2N OS version 3.0.2 for 2N Answering Units includes the following changes

Important update notice

• If you are updating from version 3.0.0, the new web interface cannot download firmware from the update server. Update the device using the old web interface or manually upload a newer firmware file.

Essential Corrections

• Fixed an issue that prevented downloading a new firmware from the update server via the new web interface. As a workaround when updating from version 3.0.0, use the old web interface or manually upload a newer firmware file to the device.
• Important bug fixes.

2N OS version 3.0.0 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 3.0.x

• For security reasons, network settings can no longer be modified using 2N Network Scanner.
• All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
• Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
• In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

Introducing the MVP of our new graphical interface

• We are excited to deliver the first Minimum Viable Product of our redesigned graphical interface. This initial release brings several impactful improvements that make everyday work smoother and more intuitive. Among the most notable additions are guided wizards, an enhanced search experience, and other usability upgrades aimed at significantly improving overall user interaction.
• Because this is an MVP, some features are still in development. We will continue to refine, expand, and optimize the interface over the coming updates to ensure it reaches its full potential as quickly as possible.
• If you’re interested in learning how you can support the ongoing development of the new interface and share your feedback with us, please visit the following link: https://www.2n.com/-/media/Files/Web/downloads/Introducing-the-New-2N-Web-Interface

New Functions and Improvements

• Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
• Added support for Blind Assistance Mode during incoming calls. In this mode, all controls—both physical buttons and the display—perform identical actions. A short press answers an incoming call or ends an active call, while a long press unlocks the door once the call is connected. This mode is intended for visually impaired users and should not be used together with Screen Lock.
• STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
• Added support for the Japanese language in the display UI of Answering Units and IP Style.
• The custom language name defined in the translation file is now displayed in the Display UI instead of the generic "Custom" label.

Essential Corrections

• Updated several internal libraries.
• Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
• A voicemail message is no longer played after a successful door unlock if the call was not answered.
• Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
• Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
• Other corrections and fixes.

da9a324d8c54a62a9c929288badf203955b3b999ef07ee7e4dbd9865cf8920f4

2N OS version 2.49.1 for 2N Answering Units includes the following changes

Essential Corrections

• Updated an internal library containing critical vulnerabilities.
• Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
• Important bug fixes.

2N OS version 2.49.0 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 2.49.x

• Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
• All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
• Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
• In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

New Functions and Improvements

• The administrator account now accepts "root" as a valid username as well.
• AXIS Camera Station integration has been significantly improved:
• The ACS tab in the web interface is now renamed to AXIS.
• AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
• After the initial login to the web interface, the "root" username can also be used for ACS access.
• An optional dedicated ACS account is now available.
• If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
• If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
• If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
• 2N IP Utility can now also be used to configure IP settings after the default password has been changed.
• Indoor View now includes an optional Control Center screen, providing access to additional HTTP commands and widgets such as date and time. It can be enabled and customized under Services > Control Center. This feature allows you to define which screen appears when the device wakes—either the classic home screen or the customizable Control Center. The second screen remains accessible with a simple swipe.
• A background image that is common to both the Home Screen and Control Center can be uploaded via Hardware > Display > Background Image.
• Native integration with Microsoft Teams has been added, allowing bidirectional calling with our devices and enabling door unlocking directly from the Teams client. Configuration is available via Services > Integration > MS Teams.
• A firewall has been added the following devices: Answering Units, Access Unit 2.0, and Access Unit M.

Essential Corrections

• Updated several internal libraries.
• Increased stability of Indoor View during repeated calls.
• Syslog now correctly logs initial packets after reboot.
• Improved overall SIP performance and stability.
• Important bug fixes.

af6fda20d90c8effba130401261d62ea4b8ecac611351139c74da8c1032de47c

2N® Network Scanner version 3.0.9

2N® Network Scanner version 3.0.4

Features

2N OS version 2.48.1 for 2N Answering Units includes the following changes

Precautions to be taken during update to FW version 2.48.x

• All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
• Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
• In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

New Functions and Improvements

• Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR.
• All SIP accounts now support additional backup proxy and registrar servers.
• Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default.
• Cameras assigned to a device in Indoor View can now be shown as the default instead of the device’s internal camera. Third-party cameras can be added via Hardware > Cameras, and the display behavior adjusted under Directory > Devices > device detail > Cameras.

Essential Corrections

• Improved certificate handling.
• Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection.
• SIP unregistration now works correctly with non-RFC-compliant User Agent Servers.
• Removed certain unnecessary syslog messages.
• Improved formatting of exported Directory CSV files.
• SIP authentication passwords can now be up to 255 characters in length.
• DNS request lengths can now be up to 255 characters.
• Improved stability of Indoor View.
• RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios.
• Fixed device crashes caused by missing Origin fields in SDP offers.
• SRTP media is now correctly offered in the ACK response when using delayed SDP negotiation enforced via options.
• When SRTP is re-negotiated during a RE-INVITE, the newly established encryption key is now properly applied to outgoing media streams.
• Improved stability of the G.729 codec.
• Important bug fixes.

e316e1e1586b0cd0597706be70bf509688904d3b06e513ceab47e9386bbb4d09