Suporte ao produto 2N LiftGate

Um gateway de IoT que transforma um elevador comum em uma solução IP moderna do século XXI.

Suporte para distribuidores 2N®

Suporte para outros clientes

Aplicativos e Software
Firmware
Manuais
Outros documentos
Perguntas frequentes
Especificações técnicas
Tutoriais em vídeo

Aplicativos e software

Nome do arquivo

Categoria

Tipo

SBOM - 2N EasyGate IP, 2N LiftGate.json

Software e firmware

Programas

Baixar

Data de publicação:	01/11/2024
Tamanho do arquivo:	61 kB
Tipo	application/json

Firmware

Nome do arquivo

Categoria

Tipo

Firmware 1.15.3 - 2N LiftGate - US

Software e firmware

Firmware

Baixar

Data de Publicação:	23/04/2026
Tamanho do arquivo:	82 MB
Tipo	application/x-zip-compressed

Release notes LiftGate

Version: 1.15.3

Final version: 1.15.3.0.4

Date of issue: 16.4.2026

New features and improvements:

Functionality ‘Fireman’ allows to use connected IP device as fireman communicator in lift, using SIP server in device (LIG2N-699)
Function to send message when batteries are going to be flat according to EN 81-28, necessary for TUV certification (LIG2N-715)
New version of wireless modules supporting with SDK used, security demand (LIG2N-745, 749, 750,
Restriction for SMS setting phone number can be applicated id demanded (LIG2N-783)
Default setting of wireless connection changed to roaming enable (LIG2N-753)
Added functionality needed for Open VPN certificate management – uploading, downloading, deleting (LIG2N-412)
Counter of LiftGate malfunction – resets because of module malfunction, LiftGate process crash, Daemon resets and user invoked reset (LIG2N-692, 693, 814)
When uploading of any file in progress, the selection menu is not displayed to avoid confusing of the user (LIG2N-769)
When battery disconnected, the information is displayed in Battery menu and parameters connected with battery are grey (LIG2N-755)
Adding parameters which can be set by SMS – parameters of DNS servers (LIG2N-780)
Defined format of configuration SMS – unification with EasyGate IP (LIG2N-826, 828)

Bugfixes:

High pulse load on DSL connection can generate disturbance on power source 48V resulting in block of PoE source - fixed (LIG2N-726)
When firmware upload is interrupted, the next upgrade can be performed only after device restart (LIG2N-582)
Damaged battery can be incorrectly detected, found zero capacity can induce zero dividing error resulting in wrong functionality (LIG2N-738)
Flooding log by error messages of Linux Avahi daemon (LIG2N-709)
Error in decoding of long SMS for configuration, now can be more commands sent in one SMS (LIG2N-756)
Protection against https certificate with incorrect format added (LIG2N-767)
Autometic change of IP address when connection thru WAN port changed, after reconnection is necessary to perform reset of device (LIG2N-459)
Incorrect signaling of battery capacity by LED Battery fixed (LIG2N-773)
Error with VoIP authentication (realm) fixed (LIG2N-816)

Version: 1.15.0

Final version: 1.15.0.0.4

Date of issue: 13.3.2025

New features and improvements:

Possibility to disable Ping service on LAN and WAN, default setting – disabled (LIG-631)
Open VPN supported on IPv6 (LIG-331)
Increased length of PIN for SIM, maximal length 8 digits (LIG-626)
Authorization PAP/CHAP added for wireless connection (LIG-649)
Multicast DNS ability (MDNS) added (LIG-697)
Configuration for comment during login to web interface according IEC-62443-4-2, CR 1.12 added (LIG-640)
Battery life time alert set to default value 730 days (LIG-509)

Bugfixes:

Battery management improvement, protection against overloading by comparing capacity and charge added (LIG-672, LIG-684, LIG-689)
Communication supported by VLAN between LAN port on central unit and WAN failed (LIG-703)
Redirecting router solicit message to LAN as multicast message to speed up connecting devices in LAN to WAN after switching connection to WAN (LAN-535)
Incorrect signaling of data connection after mobile network connection lost fixed (LIG-584, LIG-585, LIG-586)

Version: 1.14.0

Final version: 1.14.0.0.3

Date of issue: 25.10.2024

New features and improvements:

Specific configuration for Wurtec added (LIG-651)
Bridge mode for IPv.6 enabled in default configuration (LIG-656)
Battery low reporting improvement – both capacity and voltage considered (LIG-662)
Filtering of signal level messages in syslog – suppressing unimportant changes evidence to avoid syslog overload (LIG-665)
Battery management and syslog registration improvement (LIG-666, LIG-667, LIG-672, LIG-679, LIG-680, LIG-681)
Support for Verizon – certification, support for standard use for data connection (LIG-641)
Periodical refresh of data connection available by configuration (LIG-644)
Roaming enabled and XLAT disabled as default setting in ordering numbers for Cedes - 5024101E-CDS, 5024101US-CDS (LIG-642, LIG-646)

Bugfixes:

Failed connection in Verizon network fixed (LIG-635, LIG-654, LIG-655, LIG-647, LIG-660, LIG-661, LIG-664, LIG-673)

Version: 1.13.0

Final version: 1.13.0.0.6

Date of issue: 7.3.2024

New features and improvements:

VLAN support (LIG-606, 620, 627)
Improved monitoring by EC – network interface monitoring by websockets (LIG-615)
Time window for log – limited number of unsuccessful login (LIG-619)
IPv6/464XLAT technology selected as default setting (LIG-634)
Bugfixes:

Interrupted upload of FW can be restored after device reset – fixed (LIG-582)
Packed transfer by using 464XLAT (IPv.4/IPv.6) fixed – Zero Tier issue (LIG-633)

Version: 1.12.1

Final version: 1.12.1.0.4

Date of issue: 23.5.2023

New features and improvements:

Battery load regulation without battery temperature measuring (LIG-559)
Advertising of LAN IPv6 prefix to WAN to allow addressing of LAN devices thru WAN (RFC4191 type 24) (LIG-526)
Implementation of 464XLAT for IPv6 – Ipv4 connectivity support (LIG-510, 511, 512)
Events – wget support for IPv6 added (LIG-332)
Secure boot implemented (LIG-581)

Bugfixes:

Check for new version from Elevator center fixed (LIG-562)
Battery charger setting in boot section – fixed incorrect loading in short time period after power on or restart (LIG-564)
Incorrect ping to current DNS server fixed (LIG-528)
Error during selected SIM change fixed (LIG-533)
Network status message during roaming is not correct – home network signalized (LIG-536)
Routing error to WAN when mobile connection available fixed (LIG-479)
Roaming setting error fixed, when setting changed, she setting is active immediately (LIG-567)
When 4G technology selected and network fixing set the device is not able to register to the network – fixed (LIG-580)

Version: 1.11.0

Final version: 1.11.0.0.10

Date of issue: 17.1.2023

New features and improvements:

IPv6 support for connection to wireless network, LAN and WAN (LIG-232, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 453)
Module EC25-AF integration – prepared for AT&T and Verizon support in USA (LIG-422)
Security improvements – protection of ports against unauthorized access (LIG-465, 467)
Security improvements – tools and rights of processes in firmware (LIG-468, 470)
Security improvements – protection of secret data in device (LIG-471, 469, 474, 488, 493, 497)
Security improvement – Firmware protected by digital signature. Side effect – downgrade is not possible. (LIG-498)

Bugfixes:

Routing to WAN blocked when routing to wireless network set (LIG-479)
Keyword field option hide added (LIG-507)
Login credentials delayed after logout in web form (LIG-506)
Data after SIM switching initiated by SIM replacing occasionally blocked (LIG-522, 532)
DHCP error when connection technology changed or connection lost (LIG-521, 523)
SIP registration error when routing WAN-Wireless changed (LIG-525)
Incorrect log of error which doesn’t occur (LIG-531)

Version: 1.10.1

Final version: 1.10.1.10.18

Date of issue: 17.10.2022

New features and improvements:

Confirmation for factory default reset requested (LIG-354)
Open VPN – added logging by name and password (LIG-411)
Open VPN – possibility to load debug messages to syslog (LIG-413)
Open VPN updated to version 2.5
Change in data sent by events to My2N – decrease of message number (LIG-423)
Change in massaging of FW upgrade progress to have more precise information about upgrade in EC (LIG-424)
Persistent connection during configuration thru EC – keep alive packets added (LIG-431)
Charging current to battery optimalization to improve life duration of battery (LIG-433, LIG-440, LIG-447)
Support of null APN (LIG-314)
Improvement in temperature management (LIG-207, LIG-425, LIG-435)
Incoming voice call rejected – no destination for connect available (LIG-408)
Certificate renew driven by EC available (LIG-338)

Bugfixes:

Added hint for table Restriction for SMS (LIG-321)
Lost events when connection interrupted (LIG-430)
Time for start of version with EC25-AF is shorter – optimalization (LIG-415)
Protection against duplicity in static DHCP table (LIG-400)
Battery expiration is not signaled by LED nor web menu (LIG-388)
Missing board temperature actualization in status of LIG (LIG-437)
Routing from LAN to VPN error (LIG-448)
Incorrect signalization of blocked SIM (LIG-449)
Missing temperature range check for temperature limit (LIG-454)

Version: 1.10.0

Final version: 1.10.0.10.12

Date of issue: 24.1.2022

New features and improvements:

Connectivity to Elevator Center (EC) for remote access and configuration
US version with connectivity to AT&T and Verizon available
Setting mobile configuration from “voice centric” to “data centric”
Modification of LiftGate web – preliminary version replaced
Rx/Tx data counter for data flow registering added
Default route setting – mobile network, WAN backup

Bugfixes:

SIM2 reading error fixed
SIM PIN setting fixed
SSL library version updated – compatibility issue
Syslog to IP address fixed
Shorter connection time to EC after change of routing
Port forwarding to WAN fixed

Version: 1.9.0

Final version: 1.9.0.9.3

Date of issue: 28.5.2021

First customer version – basic functionality according manual

Baixar notas de versão

Últimos Manuais

Installation Manual - 2N LiftGate (1.15.3)

Online

Outros documentos

Filter

Categoria

Marketing

Técnica

Ordenar por

13 resultados

Nome do arquivo

Categoria

Tipo

Firmware 1.15.3 - 2N LiftGate - US

Software e firmware

Firmware

Baixar

Data de publicação:	23/04/2026
Tamanho do arquivo:	82 MB
Tipo	application/x-zip-compressed

Release notes LiftGate

Version: 1.15.3

Final version: 1.15.3.0.4

Date of issue: 16.4.2026

New features and improvements:

Functionality ‘Fireman’ allows to use connected IP device as fireman communicator in lift, using SIP server in device (LIG2N-699)
Function to send message when batteries are going to be flat according to EN 81-28, necessary for TUV certification (LIG2N-715)
New version of wireless modules supporting with SDK used, security demand (LIG2N-745, 749, 750,
Restriction for SMS setting phone number can be applicated id demanded (LIG2N-783)
Default setting of wireless connection changed to roaming enable (LIG2N-753)
Added functionality needed for Open VPN certificate management – uploading, downloading, deleting (LIG2N-412)
Counter of LiftGate malfunction – resets because of module malfunction, LiftGate process crash, Daemon resets and user invoked reset (LIG2N-692, 693, 814)
When uploading of any file in progress, the selection menu is not displayed to avoid confusing of the user (LIG2N-769)
When battery disconnected, the information is displayed in Battery menu and parameters connected with battery are grey (LIG2N-755)
Adding parameters which can be set by SMS – parameters of DNS servers (LIG2N-780)
Defined format of configuration SMS – unification with EasyGate IP (LIG2N-826, 828)

Bugfixes:

High pulse load on DSL connection can generate disturbance on power source 48V resulting in block of PoE source - fixed (LIG2N-726)
When firmware upload is interrupted, the next upgrade can be performed only after device restart (LIG2N-582)
Damaged battery can be incorrectly detected, found zero capacity can induce zero dividing error resulting in wrong functionality (LIG2N-738)
Flooding log by error messages of Linux Avahi daemon (LIG2N-709)
Error in decoding of long SMS for configuration, now can be more commands sent in one SMS (LIG2N-756)
Protection against https certificate with incorrect format added (LIG2N-767)
Autometic change of IP address when connection thru WAN port changed, after reconnection is necessary to perform reset of device (LIG2N-459)
Incorrect signaling of battery capacity by LED Battery fixed (LIG2N-773)
Error with VoIP authentication (realm) fixed (LIG2N-816)

Version: 1.15.0

Final version: 1.15.0.0.4

Date of issue: 13.3.2025

New features and improvements:

Possibility to disable Ping service on LAN and WAN, default setting – disabled (LIG-631)
Open VPN supported on IPv6 (LIG-331)
Increased length of PIN for SIM, maximal length 8 digits (LIG-626)
Authorization PAP/CHAP added for wireless connection (LIG-649)
Multicast DNS ability (MDNS) added (LIG-697)
Configuration for comment during login to web interface according IEC-62443-4-2, CR 1.12 added (LIG-640)
Battery life time alert set to default value 730 days (LIG-509)

Bugfixes:

Battery management improvement, protection against overloading by comparing capacity and charge added (LIG-672, LIG-684, LIG-689)
Communication supported by VLAN between LAN port on central unit and WAN failed (LIG-703)
Redirecting router solicit message to LAN as multicast message to speed up connecting devices in LAN to WAN after switching connection to WAN (LAN-535)
Incorrect signaling of data connection after mobile network connection lost fixed (LIG-584, LIG-585, LIG-586)

Version: 1.14.0

Final version: 1.14.0.0.3

Date of issue: 25.10.2024

New features and improvements:

Specific configuration for Wurtec added (LIG-651)
Bridge mode for IPv.6 enabled in default configuration (LIG-656)
Battery low reporting improvement – both capacity and voltage considered (LIG-662)
Filtering of signal level messages in syslog – suppressing unimportant changes evidence to avoid syslog overload (LIG-665)
Battery management and syslog registration improvement (LIG-666, LIG-667, LIG-672, LIG-679, LIG-680, LIG-681)
Support for Verizon – certification, support for standard use for data connection (LIG-641)
Periodical refresh of data connection available by configuration (LIG-644)
Roaming enabled and XLAT disabled as default setting in ordering numbers for Cedes - 5024101E-CDS, 5024101US-CDS (LIG-642, LIG-646)

Bugfixes:

Failed connection in Verizon network fixed (LIG-635, LIG-654, LIG-655, LIG-647, LIG-660, LIG-661, LIG-664, LIG-673)

Version: 1.13.0

Final version: 1.13.0.0.6

Date of issue: 7.3.2024

New features and improvements:

VLAN support (LIG-606, 620, 627)
Improved monitoring by EC – network interface monitoring by websockets (LIG-615)
Time window for log – limited number of unsuccessful login (LIG-619)
IPv6/464XLAT technology selected as default setting (LIG-634)
Bugfixes:

Interrupted upload of FW can be restored after device reset – fixed (LIG-582)
Packed transfer by using 464XLAT (IPv.4/IPv.6) fixed – Zero Tier issue (LIG-633)

Version: 1.12.1

Final version: 1.12.1.0.4

Date of issue: 23.5.2023

New features and improvements:

Battery load regulation without battery temperature measuring (LIG-559)
Advertising of LAN IPv6 prefix to WAN to allow addressing of LAN devices thru WAN (RFC4191 type 24) (LIG-526)
Implementation of 464XLAT for IPv6 – Ipv4 connectivity support (LIG-510, 511, 512)
Events – wget support for IPv6 added (LIG-332)
Secure boot implemented (LIG-581)

Bugfixes:

Check for new version from Elevator center fixed (LIG-562)
Battery charger setting in boot section – fixed incorrect loading in short time period after power on or restart (LIG-564)
Incorrect ping to current DNS server fixed (LIG-528)
Error during selected SIM change fixed (LIG-533)
Network status message during roaming is not correct – home network signalized (LIG-536)
Routing error to WAN when mobile connection available fixed (LIG-479)
Roaming setting error fixed, when setting changed, she setting is active immediately (LIG-567)
When 4G technology selected and network fixing set the device is not able to register to the network – fixed (LIG-580)

Version: 1.11.0

Final version: 1.11.0.0.10

Date of issue: 17.1.2023

New features and improvements:

IPv6 support for connection to wireless network, LAN and WAN (LIG-232, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 453)
Module EC25-AF integration – prepared for AT&T and Verizon support in USA (LIG-422)
Security improvements – protection of ports against unauthorized access (LIG-465, 467)
Security improvements – tools and rights of processes in firmware (LIG-468, 470)
Security improvements – protection of secret data in device (LIG-471, 469, 474, 488, 493, 497)
Security improvement – Firmware protected by digital signature. Side effect – downgrade is not possible. (LIG-498)

Bugfixes:

Routing to WAN blocked when routing to wireless network set (LIG-479)
Keyword field option hide added (LIG-507)
Login credentials delayed after logout in web form (LIG-506)
Data after SIM switching initiated by SIM replacing occasionally blocked (LIG-522, 532)
DHCP error when connection technology changed or connection lost (LIG-521, 523)
SIP registration error when routing WAN-Wireless changed (LIG-525)
Incorrect log of error which doesn’t occur (LIG-531)

Version: 1.10.1

Final version: 1.10.1.10.18

Date of issue: 17.10.2022

New features and improvements:

Confirmation for factory default reset requested (LIG-354)
Open VPN – added logging by name and password (LIG-411)
Open VPN – possibility to load debug messages to syslog (LIG-413)
Open VPN updated to version 2.5
Change in data sent by events to My2N – decrease of message number (LIG-423)
Change in massaging of FW upgrade progress to have more precise information about upgrade in EC (LIG-424)
Persistent connection during configuration thru EC – keep alive packets added (LIG-431)
Charging current to battery optimalization to improve life duration of battery (LIG-433, LIG-440, LIG-447)
Support of null APN (LIG-314)
Improvement in temperature management (LIG-207, LIG-425, LIG-435)
Incoming voice call rejected – no destination for connect available (LIG-408)
Certificate renew driven by EC available (LIG-338)

Bugfixes:

Added hint for table Restriction for SMS (LIG-321)
Lost events when connection interrupted (LIG-430)
Time for start of version with EC25-AF is shorter – optimalization (LIG-415)
Protection against duplicity in static DHCP table (LIG-400)
Battery expiration is not signaled by LED nor web menu (LIG-388)
Missing board temperature actualization in status of LIG (LIG-437)
Routing from LAN to VPN error (LIG-448)
Incorrect signalization of blocked SIM (LIG-449)
Missing temperature range check for temperature limit (LIG-454)

Version: 1.10.0

Final version: 1.10.0.10.12

Date of issue: 24.1.2022

New features and improvements:

Connectivity to Elevator Center (EC) for remote access and configuration
US version with connectivity to AT&T and Verizon available
Setting mobile configuration from “voice centric” to “data centric”
Modification of LiftGate web – preliminary version replaced
Rx/Tx data counter for data flow registering added
Default route setting – mobile network, WAN backup

Bugfixes:

SIM2 reading error fixed
SIM PIN setting fixed
SSL library version updated – compatibility issue
Syslog to IP address fixed
Shorter connection time to EC after change of routing
Port forwarding to WAN fixed

Version: 1.9.0

Final version: 1.9.0.9.3

Date of issue: 28.5.2021

First customer version – basic functionality according manual

Download das notas de versão

CAD drawings elevator systems

Técnica

CAD e BIM

Baixar

Data de publicação:	15/04/2026
Tamanho do arquivo:	20 MB
Tipo	application/x-zip-compressed

Sistemas de elevadores - Catálogo HQ (EN)

Marketing

Catálogo

Baixar

Data de publicação:	09/10/2025
Tamanho do arquivo:	19 MB
Tipo	application/pdf

Segurança cibernética em elevadores (EN)

Marketing

Folhetos

Baixar

Data de publicação:	19/09/2025
Tamanho do arquivo:	3 MB
Tipo	application/pdf

2N Elevator solutions - histórias de sucesso (EN)

Marketing

Histórias de sucesso

Baixar

Data de publicação:	29/11/2024
Tamanho do arquivo:	439 kB
Tipo	application/pdf

Apresentação do produto (EN) - 2N Comunicação de emergência para elevadores

Marketing

Apresentações

Baixar

Data de publicação:	29/11/2024
Tamanho do arquivo:	37 MB
Tipo	application/vnd.openxmlformats-officedocument.presentationml.presentation

SBOM - 2N EasyGate IP, 2N LiftGate.json

Software e firmware

Programas

Baixar

Data de publicação:	01/11/2024
Tamanho do arquivo:	61 kB
Tipo	application/json

Sistemas de elevadores - Catálogo (EN)

Marketing

Catálogo

Baixar

Data de publicação:	16/10/2024
Tamanho do arquivo:	2 MB
Tipo	application/pdf

Emergency Elevator Communications - Leaflet (EN)

Marketing

Folhetos

Baixar

Data de publicação:	16/10/2024
Tamanho do arquivo:	2 MB
Tipo	application/pdf

Certificate (EN) - IEC 62443-4-1

Técnica

Certificação de produtos

Baixar

Data de publicação:	15/10/2024
Tamanho do arquivo:	543 kB
Tipo	application/pdf

Get ready for the transition to 4G (EN)

Marketing

Folhetos

Baixar

Data de publicação:	15/10/2024
Tamanho do arquivo:	1 MB
Tipo	application/pdf

Self-evaluation (EN) - IEC 62443-4-2.pdf

Técnica

Certificação de produtos

Baixar

Data de publicação:	14/10/2024
Tamanho do arquivo:	292 kB
Tipo	application/pdf

Carregar mais

FAQ

Especificações técnicas

Fornecimento de energia

Tensão:

100 - 230V AC

Frequência:

50/60Hz

Poder em:

65W, para 2x Cabin Switch

Suporte de alimentação de backup:

bateria de chumbo-ácido incorporada, 12V, 9A, incluído
Rede Celular

Bandas GSM:

EU (EGSM 900 MHz, GSM 1800 MHz), AU (EGSM 850/900 MHz, GSM 1800/1900 MHz)

Bandas UMTS:

EU (850/900/2100 MHz), AU (850/900/1900/2100 MHz), US (850/1700/1900 MHz)

Bandas LTE:

EU (B1, B3, B5, B7, B8, B20), US (B2, B4, B5, B12, B13, B14, B66, B71), AU (B1, B3, B5, B7, B28, B40)

Cartão SIM:

2 slots, (U)SIM, 1.8V, 3V
Antena

Número:

2x (Principal e Diversidade)

Impedância:

50Ω

Tipo de conector:

F-SMA
Interfaces

LAN:

4x RJ-45, 1 Gbps (1x WAN, 3x LAN)

Protocolos suportados:

IPv4, IPv6, ICMP, DNS, Opção DHCP. 66, NAT, HTTP, HTTPS, WS, NTP, OpenVPN, Log de sistema

Entradas:

2× 0–24 V (nível baixo 0–2 V, alto 4–24 V)

Saída de relé:

2, Contato NA e NF, bloco de terminais COM, max. 30 V / 1 A DC, max. 125 V / 0.3 A AC
Propriedades mecânicas

Temperatura operacional:

-20 a 55°C

Dimensões:

270 × 240 × 80 mm

Classificação da capa:

IP20

Peso:

4,7 kg com bateria, 2,2 kg sem bateria

No momento, não há tutoriais em vídeo disponíveis para este produto.

Precisa falar com alguém?

Nossa equipe está aqui para você! Selecione sua região ou foco

Suporte ao cliente

Contato para suporte técnico dos EUA

Chame-nos

Controle de Acesso 1-800-444-2947
Elevadores +420 228 880 382
(Inglês) Disponível das 9h às 17h CET (de segunda a sexta-feira).

Formulário de contato

Controle de acesso
Faça login com sua conta online da Axis e crie um novo ticket.

Elevadores
Preencha nosso formulário de suporte técnico e um membro da equipe da 2N entrará em contato com você o mais rápido possível.

Entre em contato com a Axis

Entre em contato com a 2N

2N LiftIP 2.0

2N Lift1

2N Sentrio

2N Lift8

2N EasyGate IP

2N EasyGate IP+

2N EasyGate PRO

2N Elevator Center

2N Call Center

2N Lift IP Service Tool

2N Lift8 Service Tool

2N Lift1 Service Tool

Suporte ao produto 2N LiftGate

Aplicativos e software

Filter

Firmware

Filter

Release notes LiftGate

Últimos Manuais

Installation Manual - 2N LiftGate (1.15.3)

Outros documentos

Filter

Release notes LiftGate

FAQ

Especificações técnicas

Fornecimento de energia

Rede Celular

Antena

Interfaces

Propriedades mecânicas

Precisa falar com alguém?

Contato para suporte técnico dos EUA

Chame-nos

Formulário de contato