Technical Parameters

Voltage

100–240 V AC

Supply output

65 W version with support for 2 Cabin switches (2x CS)

Frequency

50/60 Hz

internal gel-lead-acid accumulator

12 V / 9 Ah

optional connection of an external higher-capacity gel-lead-acid accumulator

Control

web interface

Default ID/Password

admin/2n

Device State Indicator

viz Overview of LED Indicators

Internet Protocol

Impedance

50 Ω

2x SMA connector (for main / optional antenna)

DSL (Cabin switch line)

48 V / 1 A version with support for 2 Cabin switches (Cabin switch 1&2)

INP:

pin1:

10.5 V 5 mA

pin2:

input 1 – 47 kOhm serial resistor, < 2 V = LOW, > 4 V = HIGH, 30 V DC max

pin3:

input 2 – 47 kOhm serial resistor, < 2 V = LOW, > 4 V = HIGH, 30 V DC max

pin4:

GND

REL:

Contact resistance

75 mOhm 1 A, 6 V DC

Operational contact parameters

30 V / 1 A DC

Max. allowed contact current

2 A

Pin 1–2 (4–5)

normally closed (NC)

Pin 2–3 (5–6)

normally open (NO)

EU version:

LTE FDD

B1/B3/B5/B7/B8/B20

LTE TDD

B38/B40/B41

WCDMA

B1/B5/B8

GSM

B3/B

AU version:

LTE FDD

B1/B2/B3/B4/B5/B7/B8/B28

LTE TDD

B40

WCDMA

B1/B2/B5/B8

GSM

B2/B3/B5/B8

US version:

LTE FDD

B2/B4/B12

WCDMA

B2/B4/B5

PoE

48 V / 6,5 W max, Class2, mode A

viz Overview of Connectors

2.2 kg without battery pack

2,2 kg

4.7 kg with battery pack

4,7 kg

Dimensions

270 x 240 x 80 mm

IP cover

IP30

Operating temperature

−20 °C do +50 °C

Storing temperature

−15 °C do +40 °C

Maximum altitude

2 000 m

Power Supply

48 V / 19 W max via DSL line

Interface

OUT

output for output peripheral connection (12 V DC / 100 mA / 1.2 W)

DSL

for connection with the main unit

4x LAN: 

Operating temperature

−20 °C to +50 °C

IP cover 

IP30

Maximum altitude

2 000 m

Dimensions

145 x 95 x 33 mm