If you don’t have a 2N Media Library account, please fill in the online registration form and apply for access.
Please note, that access to the Media Library is exclusive to authorized representatives of 2N business partners. Therefore your request will be reviewed and approved by 2N.
Whether you’re looking for a catalogue detailing our apartment intercom system solutions or want a data sheet for the 2N IP Style, everything is below. Search, find, download, share!
2N OS version 2.50.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Fixed an issue where Access Unit 1.0 was unable to boot for an extended period after power loss.
Updated several internal libraries.
Important bug fixes.
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
2N OS version 3.2.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Improved camera image quality with new fisheye corrections. Users can adjust `Custom Image Crop` and toggle `Fisheye Correction` in `Customization > Camera > Internal Camera` to achieve the desired angle of view. Note that `Custom Image Crop` changes are only applied after a stream restart.
Redesigned the `Access > Access Rules` section for an improved user experience.
Added the ability to bypass on-device access control via `Integration > Access Control > Override`; available modes include:
2N on-device access control: Device is managed by 2N access control.
Genetec Synergis: Device is managed by Genetec Synergis access control.
Axis access control: Device is managed by Axis access control.
Essential Corrections
Fixed a memory leak in Automation.
Added and corrected `originator` parameter values in `DtmfEntered` and `SwitchStateChanged` events to accurately reflect the action origin.
Added support for a new Vbus display revision.
Fixed an issue where Access Unit M failed to signalize switch hold after a reboot.
Improved configuration import speed and stability.
2N OS version 3.2.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Improved camera image quality with new fisheye corrections. Users can adjust `Custom Image Crop` and toggle `Fisheye Correction` in `Customization > Camera > Internal Camera` to achieve the desired angle of view. Note that `Custom Image Crop` changes are only applied after a stream restart.
Redesigned the `Access > Access Rules` section for an improved user experience.
Added the ability to bypass on-device access control via `Integration > Access Control > Override`; available modes include:
2N on-device access control: Device is managed by 2N access control.
Genetec Synergis: Device is managed by Genetec Synergis access control.
Axis access control: Device is managed by Axis access control.
Essential Corrections
Fixed a memory leak in Automation.
Added and corrected `originator` parameter values in `DtmfEntered` and `SwitchStateChanged` events to accurately reflect the action origin.
Added support for a new Vbus display revision.
Fixed an issue where Access Unit M failed to signalize switch hold after a reboot.
Improved configuration import speed and stability.
2N OS version 3.2.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Improved camera image quality with new fisheye corrections. Users can adjust `Custom Image Crop` and toggle `Fisheye Correction` in `Customization > Camera > Internal Camera` to achieve the desired angle of view. Note that `Custom Image Crop` changes are only applied after a stream restart.
Redesigned the `Access > Access Rules` section for an improved user experience.
Added the ability to bypass on-device access control via `Integration > Access Control > Override`; available modes include:
2N on-device access control: Device is managed by 2N access control.
Genetec Synergis: Device is managed by Genetec Synergis access control.
Axis access control: Device is managed by Axis access control.
Essential Corrections
Fixed a memory leak in Automation.
Added and corrected `originator` parameter values in `DtmfEntered` and `SwitchStateChanged` events to accurately reflect the action origin.
Added support for a new Vbus display revision.
Fixed an issue where Access Unit M failed to signalize switch hold after a reboot.
Improved configuration import speed and stability.
- Enrolling of RFID cards from 9137421E External RFID Reader 125kHz + 13.56MHz (USB interface), or the HID SEOS compatible version 9137424E, directly to web interface of 2N IP Intercoms, 2N Access Units and 2N Access Commander.
- Enrolling of users into Bluetooth access control. Users need to have the 2N My2N app on their smartphone and Bluetooth capable 2N devices.
- Enrolling of users for access control using the 9137423E USB Fingerprint reader.
- Certificate valid until December 2026.
- Windows 10 or newer
- With Microsoft .NET Desktop Runtime 8.0 (x86) or newer (2N USB Driver installer will download required dependencies automatically if missing)
Changes in the version 1.9.0:
- Support for MIFARE® DESFire® cards with third-party applications installed (Cards must support anonymous application creation)
- Adds support for Access Commander version 3.6