2N LiftGate

The 2N LiftGate IoT gateway will transform a regular elevator into a modern IP solution for the 21st century. Plus, you needn’t worry if there’s a UTP cable in the elevator. IP connectivity in the elevator is secured using 2 wires in the travelling cable. 2N LiftGate combines the functions of an LTE router, a backup power supply, a converter (2-wire to IP) and a switch all in one unit. Install just 1 product instead of 4 and save time and money.

This product is not sold through the Axis distribution network, please contact our representative by completing the form.

Contact Our Specialists

IP connectivity over 2-wire
Backup power supply
All in one IoT device

Next (4)

Versions

2N LiftGate, Aku+, EU plug

2N LiftGate, Aku+, AU plug

2N LiftGate Cabin Switch, 4x ETH, 12 V DC

Technical specifications

Power Supply

Voltage:

100 - 230V AC

Frequency:

50/60Hz

Power In:

65W, para 2× interruptor de cabina

Backup Power Supply:

built-in lead-acid battery, 12V, 9A, included
Cellular Network

GSM Bands:

EU (EGSM 900 MHz, GSM 1800 MHz), AU (EGSM 850/900 MHz, GSM 1800/1900 MHz)

UMTS Bands:

EU (850/900/2100 MHz), AU (850/900/1900/2100 MHz), US (850/1700/1900 MHz)

LTE Bands:

EU (B1, B3, B5, B7, B8, B20), US (B2, B4, B5, B12, B13, B14, B66, B71), AU (B1, B3, B5, B7, B28, B40)

SIM Card:

2 slots, (U)SIM, 1.8V, 3V
Antenna

Number:

2× (Main and Diversity)

Impedance:

50Ω

Connector Type:

F-SMA
Interfaces

LAN:

4x RJ-45, 1 Gbps (1x WAN, 3x LAN)

Supported Protocols:

IPv4, IPv6, ICMP, DNS, DHCP opt. 66, NAT, HTTP, HTTPS, WS, NTP, OpenVPN, Syslog

Inputs:

2× 0–24 V (low level 0–2 V, high 4–24 V)

Relay Output:

2, NO and NC contact, COM terminal block, max. 30 V / 1 A DC, max. 125 V / 0.3 A AC
Mechanical Properties

Operating temperature:

–4 to 122 °F

Dimensions (W x H x D):

10.63 × 9.45 × 3.15 in

Cover Rating:

IP20

Weight:

10.36 lbs with battery, 4.85 lbs without battery