Technical Parameters
Power supply types | |
|---|---|
PoE | IEEE PoE 802.3af (Class 0, max. 12,95 W) (Class 0, max. 12.95 W) |
External supply | 12 V ± 1 V / 1 A DC |
Warning
2N Access Unit M cannot be fed from an external power supply and PoE at the same time. A combined supply might result in a device damage.
Audio | |
|---|---|
Speaker | 1 W / 8 Ω |
Interface | |
|---|---|
LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail) |
Recommended cabling | Cat-5e or higher |
Supported protocols | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
Passive switch (relay) | NO/NC contact, up to 30 V / 1 A AC/DC |
Active switch output | 9.8 to 13.8 V DC according to power supply, up to 600 mA
|
Tamper Switch (part of the 2N Access Unit M main unit) | |
|---|---|
Inputs | Can be used in passive or active mode (-30 V to +30 V DC)
|
Bluetooth | |
|---|---|
Bluetooth | in compliance with BLE (Bluetooth Low Energy) |
RX sensitivity | up to -98.9 dBm per 1 Mbps |
Support of mobile applications | Android 10.0 and higher, iOS 17.0 and higher |
Mechanical Parameters | ||
|---|---|---|
Cover | Robust ASA/PC construction material, which is also used for such car parts as lateral mirrors, radiator masks, etc. + chemically hardened 3 mm thick glass | |
Weight | 460 g | |
Operating temperature | −40 °C to 60 °C | |
Relative humidity | 10 to 95 % (non-condensing) | |
Storing temperature | −40 °C to 70 °C | |
Recommended altitude | up to 2000 m | |
Protection class | IP55 | |
Resistance level | IK07 | |