Power Supply
2N IP Style can be fed either directly from the LAN if equipped with PoE+ 802.3at supporting network elements or from an external 12 V ±15 % / 4 A DC power supply.
Caution
The external power supply should comply with PS2/LPS.
PoE Supply
2N IP Style is compatible with the PoE+ 802.3at and can be supplied directly from the LAN via compatible network elements. If your LAN does not support this technology, insert a PoE+ injector, between 2N IP Style and the nearest network element. This power supply provides 2N IP Style with 21.6 W for its own feeding .
Caution
The PoE power supply cannot provide 2N IP Style with a full functionality as it only offers a limited mode (Low Power Mode) for basic configuration. This way of feeding is not recommended. Connect the device to a PoE+ supply or a convenient DC supply and restart the device.
The PoE power supply detection is performed during the device restart.
If PoE supply is used where the device works in the Low Power Mode:
The power supply trouble is displayed in all the settings
The display backlight is limited (the backlight can be just 25% of the available brightness value)
The status LED on the front side is nonfunctional
Any module connected to the device via the vbus cable is nonfunctional
External Power Supply
Use a SELV supply 12 V ±15 % dimensioned to the current consumptionaccording to the required power output for the to make your device work reliably.
Caution
Make sure that the wires are firmly attached to the terminal to avoid any free contact.
Current consumption [A] | Available power output [W] |
|---|---|
3 | 36 |
4 | 48 |
Adapter Connection (1341481, 02520-001)
The white wire at the end of the adapter carries the positive charge (+), the black wire carries the negative charge (−).
Combined Power Supply
2N IP Stylecan be fed from an external power supply and PoE at the same time. In this configuration, the maximum power for the is available.
Warning
In case the external power supply is disconnected / fails during the combined external / PoE feeding, the device will get restarted. The device will run in the Low Power Mode and a feeding problem warning will be displayed in all of the configuration sections.
Reconnect the device to an external power supply or Poe+ and force restart to recover the full functionality.
Combined Power Supply
Main unit | Max consumption mA (from 12V supply) | Max consumption W (from 12V supply) | Max consumption W (z PoE+) |
|---|---|---|---|
At relax | 505 | 6.06 | 7.13 |
Restart | 700 | 8.4 | 9.88 |
Infrared light (100%) | 655 | 1.8 | 2.12 |
Display backlight intensity (100%) | 950 | 4.8 | 5.65 |
Audio (100 %) | 1420 | 10.98 | 12.92 |
Video motion detection | 20 | 0.24 | 0.28 |
OUTPUT | 600 | 7.2 | 8.47 |
RFID ON | 550 | 0.54 | 0.64 |
Pictogram backlight (100 %) | 570 | 0.24 | 0.28 |
Video streaming (ON) | 530 | 0.3 | 0.35 |
CPU (100 %) | 50 | 0.6 | 0.71 |
Memory (100 %) | 25 | 0.3 | 0.35 |
GPU (100 %) | 50 | 0.6 | 0.71 |
3 x Stream H.264 (1920 x 1080) MJPEG (1280 x 720) | 50 | 0.6 | 0.71 |
Maximum Power | 5 925 | 33,66 | 39,61 |