2N EasyGate IP+

2N EasyGate IP+ is a modern LTE/VoIP gateway designed to ensure reliable emergency communication between the elevator cabin and the call centre. It supports a wide range of interfaces for connecting to the elevator controller and other devices in the machine room. This smart gateway also complies with the latest cybersecurity standards.

Contact our Specialists

  • Future-proof connectivity with 4G support
  • Reliable DTMF transmission every time
  • Switch to VoIP without changing a thing
  • All the interfaces you need
Next (6)
Warranty sticker

Features & benefits


Future-proof connectivity with 4G support

Supports 2G, 3G, and 4G networks, enabling voice transmission via VoIP and VoLTE. Install it today using your existing network, and seamlessly switch to 4G when you're ready – no need to upgrade the hardware later.

Reliable DTMF transmission every time

Unlike mobile networks that often distort DTMF tones, the 2N EasyGate IP+ uses SIP-based VoIP communication to ensure distortion-free DTMF signal transmission – essential for accurate elevator car identification.

Switch to VoIP without changing a thing

Say goodbye to analogue communication. 2N EasyGate IP+ brings modern VoIP communication to your elevator system without replacing cabin hardware. Enjoy lower costs and crystal-clear calls.

All the interfaces you need

LAN, RS232, RS485, and CANbus – 2N EasyGate IP+ comes fully equipped for seamless connectivity with your elevator controller. It requires zero additional modules to enable remote diagnostics, monitoring, and control.

Three Ethernet ports. Total Flexibility.

With three Ethernet ports (1× WAN, 2× LAN – or all 3 as LAN), you can easily connect to the building network and elevator controller and ensure stable internet access in the shaft. One device – endless connectivity options.

Built for the harshest shafts

High heat? No problem. Dust or water splashes? Handled. With a robust casing, IP43 protection, and resistance to temperatures up to 85 °C, this gateway is ready for any lift shaft environment.

Ready even during power outages

The backup battery keeps communication running during a power failure. Passengers can still call for help, and you stay compliant with safety regulations.

Set it up in just a few minutes

No special training is needed—even non-experts can configure the gateway in minutes thanks to the automated setup using the predefined configuration templates. Fast, simple, finished.

Manage everything remotely

2N Elevator Center cloud platform gives you full remote access to monitor and manage your IP elevator devices. Reduce the need for on-site technician visits and cut maintenance costs with the secure and proven cloud solution. 

Three women and two men discussing business around an open laptop in an office

Register for Technical Training

View our technical training courses. Choose the one that suits you best.

See more

Versions

Accessories

Technical specifications

/
  • Used modules:
    EU: EC25-E, USA: EC25-AFFA, AU: EC25-AU
    LTE Bands:
    EU: B1/B3/B5/B7/B8/B20/B38/B40/B41, AU: B1/B2/B3/B4/B5/B7/B8/B28/B40, USA: B2/B4/B5/B12/B13/B14/B66/B71
    WDCMA bands:
    EU: B1/B5/B8, AU: B1/B2/B5/B8, USA: B2/B4/B5
    GSM/EDGE bands:
    EU: B3/B8, AU: B2/B3/B5/B8, USA: not supported
    SIM Cards:
    2 slots, both support 3V and 1.8V SIM cards
  • Protocols:
    SIP (RFC3261) over UDP, SIPs, SRTP
    DTMF:
    a) In-band, Analogy of traditional DTMF, where tones are merged with speech into single voice channel., b) SIP INFO (RFC 2976), DTMF signals are sent separately in the SIP message body, c) RTP Event (RFC 2833) as part of the RTP stream, RTP Event (RFC 2833) - DTMF signals are sent as separate RTP event packets, outside the main audio stream.
  • Interface Type:
    FXS, 3x Ethernet (LAN, WAN), RS232, RS485, CAN
  • Type:
    Slot for SD card
  • Power Adapter:
    (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source
    Backup Power:
    4×AA batteries, constantly monitored
  • Connector Type:
    SMA
    Impedance:
    50Ω
    Number:
    Two inputs (Main and Diversity)
  • Local:
    web UI over USB
    Cloud:
    2N Elevator Center
  • Dimensions:
    195 × 119 × 61mm
    Weight:
    600g
    Humidity:
    max 90%, non condensing
    IP coverage:
    IP43
    Operating temperature:
    -40°C to +85°C
    Status LEDs:
    power, cellular network, FXS line, data, signal strength
    Certifications:
    EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016, FCC Part 15b, UL 62368-1, PTCRB, ICES-003 Issue 6, CSA C22.2 No.62368-1, AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ

Resources & downloads

Example of a typical
connection

Scheme of 2N EasyGate IP+ access control system

Complementary Products

Back to top