2N® LTE Verso
Need an IP intercom but don't have network cabling? Got a project for an older house or a gateway far from the front door? You need an intercom that makes calls via a SIM card and only needs a power supply. What’s more, you can configure it to meet your exact requirements.
- Ideal replacement for old intercoms
- Remote yet secure configuration
- Great versatility
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Ideal replacement for old intercomsHaving old cabling (or none at all) is no problem! As it connects to the internet via a SIM card, the 2N® LTE Verso is perfect for a quick replacement of outdated intercoms in retrofit projects.
-
Remote yet secure configurationEfficiently configure the 2N® LTE Verso from anywhere in the world via a secure VPN. Simply connect the video intercom to your LTE network and add it to the My2N Management Platform.
-
Great versatilityChoose from different access control readers, add-on modules, two colours, and installation types to create exactly the right intercom system for your customer.
-
Minimal installation costsThe 4G/LTE video intercom needs no cabling other than the power supply, which saves on the cost of replacing cabling in retrofit projects.
-
Support of cloud callingThe 2N® LTE Verso can make calls using mobile data to internet-connected hardware answering units as well as to a mobile phone or tablet using the My2N app.
-
Configure the system locallyYou can also use dedicated accessories to set up the intercom, allowing you to plug a network cable into the 4G/LTE intercom and configure it as if it were on your local network.
Show more
Discover the Benefits of 2N Products Integration
Connect the 2N® LTE Verso intercom to the products of global leaders in the field of IP telephony, camera systems or home automation. Click on the logo of the selected partner for more detailed information.
Technical Parameters
| Signalling protocol | |
| SIP 2.0 (RFC - 3261) | |
| Buttons | |
| Buttons: | transparent buttons with white backlight and easily removable label |
| Number of buttons: | 1 to 146 |
| Numeric keypad: | optional |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 2W |
| Sound pressure at 1kHz at 1m distance: | 78dB |
| Audio stream | |
| Codecs: | G.711, G.729, G.722, L16/16kHz |
| Camera | |
| Resolution – JPEG: | 1280 x 960px |
| Resolution – video call: | 640 x 480px |
| Viewing angle: | 128° (H), 95° (V), 134° (D) |
| Night vision: | yes |
| Video stream | |
| Codecs: | H.263+, H.263, H.264, MJPEG, MPEG-4 |
| Touchscreen (optional) | |
| Buttons and keyboard functions | |
| Operating temperature: | -4°F – 140°F |
| Coverage level: | IK07 |
| Bluetooth reader (optional) | |
| Version | compatible with Bluetooth 5.0 (BLE) |
| Range | (short - typically up to 9 ft*, long - typically up to 30 ft*) |
| *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment | |
| Security | RSA-1024 and AES-128 encryption |
| RX sensitivity | up to -93 dBm |
| Mode | touch, tap in app, card |
| RFID card reader (optional) | |
| Supported frequencies | 125 kHz variant |
| 13.56 MHz variant | |
| 125 kHz and 13.56 MHz variant | |
| Supported card types | card type compatibility depends on Order No. |
| 125 kHz | EM4xxx |
| HID Prox | |
| 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
| reads UID (CSN) and secured MIFARE® DESFire® cards using 2N® PICard technology | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Fingerprint reader (optional) | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Status signalisation: | acoustic and with the aid of multicoloured LEDs |
| Sensing area: | large with dimensions of 0.6 x 0.8 inch |
| Operating temperature: | -4°F - 131°F |
| Certification: | FBI PIV |
| Interfaces | |
| Power supply: | 12V/2A DC |
| Network connection: | US Bands (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700) |
| EU Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800) | |
| output power - Class 3 (0.2W, 23dBm) @ LTE | |
| Typical data use: | 30MB/month plus 4MB/call minute (additional services may increase data use) |
| for calculation details see wiki.2n.com | |
| Switch output: | NC/NO contacts, max 30V/1A AC/DC |
| Active switch output: | 8 to 12V DC depending on power supply (source voltage minus 2V), max 400mA |
| Tamper switch: | optional accessory |
| Supported protocols: | SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°F – 140°F |
| Storage temperature: | -40°F – 158°F |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Officially certified outdoor coverage level: | IP54, IK08 |
| Surface mounting frame – dimensions | |
| 1 module: | 4.213 (W) x 5.118 (H) x 1.102 (D) inch |
| 2 modules: | 4.213 (W) x 9.213 (H) x 1.102 (D) inch |
| 3 modules: | 4.213 (W) x 13.346 (H) x 1.102 (D) inch |
| Flush mounting frame – dimensions | |
| 1 module: | 5.118 (W) x 6.024 (H) x 0.197 (D) inch |
| 2 modules: | 5.118 (W) x 10.118 (H) x 0.197 (D) inch |
| 3 modules: | 5.118 (W) x 14.213 (H) x 0.197 (D) inch |
| Flush mounting box (minimum hole dimensions) | |
| 1 module: | 4.252 (W) x 5.157 (H) x 1.772 (D) inch |
| 2 modules: | 4.252 (W) x 9.37 (H) x 1.772 (D) inch |
| 3 modules: | 4.252 (W) x 13.504 (H) x 1.772 (D) inch |
Show more
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Typical Usage
Introducing 2N® LTE Verso
Discover qualities of the latest LTE intercom from 2N that will definitely fulfil all your expectation.
Watch the video Technical area 
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Discover the Benefits of 2N Products Integration
Connect the 2N® LTE Verso intercom to the products of global leaders in the field of IP telephony, camera systems or home automation. Click on the logo of the selected partner for more detailed information.
Technical Parameters
| Signalling protocol | |
| SIP 2.0 (RFC - 3261) | |
| Buttons | |
| Buttons: | transparent buttons with white backlight and easily removable label |
| Number of buttons: | 1 to 146 |
| Numeric keypad: | optional |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 2W |
| Sound pressure at 1kHz at 1m distance: | 78dB |
| Audio stream | |
| Codecs: | G.711, G.729, G.722, L16/16kHz |
| Camera | |
| Resolution – JPEG: | 1280 x 960px |
| Resolution – video call: | 640 x 480px |
| Viewing angle: | 128° (H), 95° (V), 134° (D) |
| Night vision: | yes |
| Video stream | |
| Codecs: | H.263+, H.263, H.264, MJPEG, MPEG-4 |
| Touchscreen (optional) | |
| Buttons and keyboard functions | |
| Operating temperature: | -4°F – 140°F |
| Coverage level: | IK07 |
| Bluetooth reader (optional) | |
| Version | compatible with Bluetooth 5.0 (BLE) |
| Range | (short - typically up to 9 ft*, long - typically up to 30 ft*) |
| *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment | |
| Security | RSA-1024 and AES-128 encryption |
| RX sensitivity | up to -93 dBm |
| Mode | touch, tap in app, card |
| RFID card reader (optional) | |
| Supported frequencies | 125 kHz variant |
| 13.56 MHz variant | |
| 125 kHz and 13.56 MHz variant | |
| Supported card types | card type compatibility depends on Order No. |
| 125 kHz | EM4xxx |
| HID Prox | |
| 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
| reads UID (CSN) and secured MIFARE® DESFire® cards using 2N® PICard technology | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Fingerprint reader (optional) | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Status signalisation: | acoustic and with the aid of multicoloured LEDs |
| Sensing area: | large with dimensions of 0.6 x 0.8 inch |
| Operating temperature: | -4°F - 131°F |
| Certification: | FBI PIV |
| Interfaces | |
| Power supply: | 12V/2A DC |
| Network connection: | US Bands (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700) |
| EU Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800) | |
| output power - Class 3 (0.2W, 23dBm) @ LTE | |
| Typical data use: | 30MB/month plus 4MB/call minute (additional services may increase data use) |
| for calculation details see wiki.2n.com | |
| Switch output: | NC/NO contacts, max 30V/1A AC/DC |
| Active switch output: | 8 to 12V DC depending on power supply (source voltage minus 2V), max 400mA |
| Tamper switch: | optional accessory |
| Supported protocols: | SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°F – 140°F |
| Storage temperature: | -40°F – 158°F |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Officially certified outdoor coverage level: | IP54, IK08 |
| Surface mounting frame – dimensions | |
| 1 module: | 4.213 (W) x 5.118 (H) x 1.102 (D) inch |
| 2 modules: | 4.213 (W) x 9.213 (H) x 1.102 (D) inch |
| 3 modules: | 4.213 (W) x 13.346 (H) x 1.102 (D) inch |
| Flush mounting frame – dimensions | |
| 1 module: | 5.118 (W) x 6.024 (H) x 0.197 (D) inch |
| 2 modules: | 5.118 (W) x 10.118 (H) x 0.197 (D) inch |
| 3 modules: | 5.118 (W) x 14.213 (H) x 0.197 (D) inch |
| Flush mounting box (minimum hole dimensions) | |
| 1 module: | 4.252 (W) x 5.157 (H) x 1.772 (D) inch |
| 2 modules: | 4.252 (W) x 9.37 (H) x 1.772 (D) inch |
| 3 modules: | 4.252 (W) x 13.504 (H) x 1.772 (D) inch |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Ideal replacement for old intercomsHaving old cabling (or none at all) is no problem! As it connects to the internet via a SIM card, the 2N® LTE Verso is perfect for a quick replacement of outdated intercoms in retrofit projects.
- Remote yet secure configurationEfficiently configure the 2N® LTE Verso from anywhere in the world via a secure VPN. Simply connect the video intercom to your LTE network and add it to the My2N Management Platform.
- Great versatilityChoose from different access control readers, add-on modules, two colours, and installation types to create exactly the right intercom system for your customer.
- Minimal installation costsThe 4G/LTE video intercom needs no cabling other than the power supply, which saves on the cost of replacing cabling in retrofit projects.
- Support of cloud callingThe 2N® LTE Verso can make calls using mobile data to internet-connected hardware answering units as well as to a mobile phone or tablet using the My2N app.
- Configure the system locallyYou can also use dedicated accessories to set up the intercom, allowing you to plug a network cable into the 4G/LTE intercom and configure it as if it were on your local network.
Show more
Discover the Benefits of 2N Products Integration
Connect the 2N® LTE Verso intercom to the products of global leaders in the field of IP telephony, camera systems or home automation. Click on the logo of the selected partner for more detailed information.
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Technical Parameters
| Signalling protocol | |
| SIP 2.0 (RFC - 3261) | |
| Buttons | |
| Buttons: | transparent buttons with white backlight and easily removable label |
| Number of buttons: | 1 to 146 |
| Numeric keypad: | optional |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 2W |
| Sound pressure at 1kHz at 1m distance: | 78dB |
| Audio stream | |
| Codecs: | G.711, G.729, G.722, L16/16kHz |
| Camera | |
| Resolution – JPEG: | 1280 x 960px |
| Resolution – video call: | 640 x 480px |
| Viewing angle: | 128° (H), 95° (V), 134° (D) |
| Night vision: | yes |
| Video stream | |
| Codecs: | H.263+, H.263, H.264, MJPEG, MPEG-4 |
| Touchscreen (optional) | |
| Buttons and keyboard functions | |
| Operating temperature: | -4°F – 140°F |
| Coverage level: | IK07 |
| Bluetooth reader (optional) | |
| Version | compatible with Bluetooth 5.0 (BLE) |
| Range | (short - typically up to 9 ft*, long - typically up to 30 ft*) |
| *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment | |
| Security | RSA-1024 and AES-128 encryption |
| RX sensitivity | up to -93 dBm |
| Mode | touch, tap in app, card |
| RFID card reader (optional) | |
| Supported frequencies | 125 kHz variant |
| 13.56 MHz variant | |
| 125 kHz and 13.56 MHz variant | |
| Supported card types | card type compatibility depends on Order No. |
| 125 kHz | EM4xxx |
| HID Prox | |
| 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
| reads UID (CSN) and secured MIFARE® DESFire® cards using 2N® PICard technology | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Fingerprint reader (optional) | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Status signalisation: | acoustic and with the aid of multicoloured LEDs |
| Sensing area: | large with dimensions of 0.6 x 0.8 inch |
| Operating temperature: | -4°F - 131°F |
| Certification: | FBI PIV |
| Interfaces | |
| Power supply: | 12V/2A DC |
| Network connection: | US Bands (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700) |
| EU Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800) | |
| output power - Class 3 (0.2W, 23dBm) @ LTE | |
| Typical data use: | 30MB/month plus 4MB/call minute (additional services may increase data use) |
| for calculation details see wiki.2n.com | |
| Switch output: | NC/NO contacts, max 30V/1A AC/DC |
| Active switch output: | 8 to 12V DC depending on power supply (source voltage minus 2V), max 400mA |
| Tamper switch: | optional accessory |
| Supported protocols: | SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°F – 140°F |
| Storage temperature: | -40°F – 158°F |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Officially certified outdoor coverage level: | IP54, IK08 |
| Surface mounting frame – dimensions | |
| 1 module: | 4.213 (W) x 5.118 (H) x 1.102 (D) inch |
| 2 modules: | 4.213 (W) x 9.213 (H) x 1.102 (D) inch |
| 3 modules: | 4.213 (W) x 13.346 (H) x 1.102 (D) inch |
| Flush mounting frame – dimensions | |
| 1 module: | 5.118 (W) x 6.024 (H) x 0.197 (D) inch |
| 2 modules: | 5.118 (W) x 10.118 (H) x 0.197 (D) inch |
| 3 modules: | 5.118 (W) x 14.213 (H) x 0.197 (D) inch |
| Flush mounting box (minimum hole dimensions) | |
| 1 module: | 4.252 (W) x 5.157 (H) x 1.772 (D) inch |
| 2 modules: | 4.252 (W) x 9.37 (H) x 1.772 (D) inch |
| 3 modules: | 4.252 (W) x 13.504 (H) x 1.772 (D) inch |
Show more
