Network / VoLTE

The VoLTE tab allows you to set the VoLTE service to forward calls over the LTE network. Make sure this feature is supported by your operator.

IMS – allows you to enable/disable call forwarding over the LTE network to the device.

IMS State – indicates the status of the function for forwarding calls to the LTE network.

User Agent – User Agent settings for the VoLTE service.

Automatic MBN Selection – allows you to automatically set the operator profile. The list of profiles is displayed in the log after the device boots.

MBN Profile Name – operator profile name for the VoLTE feature if Automatic MBN Selection is disabled.

Active MBN Profile – the currently used MBN profile.

Internal MBN Database – enable the use of the 2N database for updating profiles, which is part of the firmware.

MBN Database – before uploading, the MBN file supplied by the operator must be sent to 2N for addition to the secure database of accepted MBN databases.

Reinstallation – after selecting the “Yes” option and subsequent saving the changes, the device will reboot, during which the MBN profiles will be deleted and re-uploaded. After restarting the device, the value is automatically set back to “No”.