ファクスの一覧
-
2N 2Wire - Installation and Configuration
-
2N Analog Intercom / Busy tone - Parameters setting
-
2N Analog Intercom does not work after installation
-
2N Analog Intercom hangs up - does not hang up automatically
-
2N Analog Intercom - How to provide all information to effectively resolve a technical issue
-
2N Analog Intercom / Incoming call - does not accept the incoming call
-
2N Contact Centre Solution installation
-
2N Fortis Commander - How to continue programming your site with new programming software and Access Commander 3.5
-
2N Fortis Commander - overview and how to use it
-
2N Fortis deployment with 2N Access Commander and Fortis Commander
-
2N Fortis - mechanical assembly and disassembly
-
2N Indoor View - How to set up calling via My2N
-
2N IP Audio Control Panel setting
-
2N IP Audio Kit Lite - Button does not work
-
2N IP audio unit can not connect to the 2N® IP Audio Manager - what could be the reason?
-
2N IP Eye issue - How to enable 2N IP Eye in Windows firewall?
-
2N IP intercom into My2N - I don't have a card with the Security Code
-
2N IP intercom into My2N using the Security Code
-
2N IP intercoms, Access Units, IP audio units - Firmware upgrade
-
2N IP Intercoms - Diagnostics and Troubleshooting
-
2N IP Intercoms - External IP camera connection (Axis IP camera guide included)
-
2N IP Intercoms - Factory reset
-
2N IP Intercoms - How to add user access credentials
-
2N IP Intercoms - IP Address retrieval
-
2N IP Intercoms - User sounds uploading
-
2N IP Intercoms – Integration with 3rd party NVR/VMS systems without ONVIF and RTSP
-
2N IP phone D7A - upgrade to 2N FW version 150.86.57.8
-
2N IP Style - bi-directional video setup
-
2N IP Vario - Reseting issue resets to default values after power supply reset
-
2N Lift1 - Configuration backup - How to backup configuration, how to capture it and trace it
-
2N LTE Verso - How to perform factory reset
-
2N LTE Verso - Registration to My2N and basic setup
-
2N Meeting Room user guide
-
2N Net Audio Decoder - Channels - What is the purpose of CHANNELS in and how to set it up?
-
2N Net Audio Decoder - Wireless connection of the unit via NETGEAR Wi-Fi client
-
2N Net Audio Encoder - how to setup and use
-
2N NetStar - Initial configuration - How to start?
-
2N NetStar SW - How to install and license 2N NetStar SW
-
2N Network Scanner - Locating 2N devices in the network
-
2N OfficeRoute & Alcatel OXO connected via SIP trunk
-
2N Records Manager installation
-
2N Security Relay - Describtion and usage with 2N IP Intercoms
-
2N SIM Star blocks FW upgrade on gateways
-
2N SIM Star shows a low ACD value
-
2N SIM Star shows a low ASR value
-
2N SingleTalk - Difference between basic and full version - What is the difference between basic and full version of 2N SingleTalk?
-
2N SingleTalk - Wont hang up automatically - What to do, if it wont hang up automatically?
-
2N SmartCom/2N SmartCom PRO - Basic configuration
-
2N SmartCom PRO / Factory reset - How to make a factory reset
-
2N SmartCom PRO - Input circuits
-
2N SmartCom PRO M-Bus overview
-
2N SmartCom PRO - Terminal error buffer code description
-
2N StarGate - Multiple outbound SMS web users
-
2N Starpoint IP Phones - How to synchronize phonebook with 2N NetStar
-
2N Student Monitoring System with 2N IP Intercoms
-
2N VoiceBlue Lite with my PBX station - Can I use?
-
2N VoiceBlue Next GSM gateway - How to configure it with 2N IP intercoms?
-
2N VoiceBlue Next GSM gateway - How to configure it with 2N IP intercoms?
-
2N VoiceBlue Next - How to configure it with Auerswald PBX?
-
2N VoiceBlue Next - How to set? (version 1.19 and lower)
-
2N® IP Style - custom scene crop option
-
3CX - How to interconnect with 3CX?
-
4 lifts connected to single 2N Lift8 Central Unit without any additional splitters
-
Access credentials - How to add them to 2N device?
-
Access key - How to configure on the Indoor Touch
-
Access logs of 2N Mobile Key
-
Access Points - How to define access points in 2N Access Commander
-
Acquiring-IP-address-of-lift-communicator-2N-LiftIP
-
Adding 2N LiftGate to the Elevator Center
-
Adding external Axis camera to 2N Indoor Touch 2.0
-
Alarm1_2 and Long_Alarm2_setting
-
Alcatel-Lucent OXE (OmniPCX Enterprise) R12: How to interconnect with 2N VOICEBLUE NEXT
-
Alcatel OXO - How to interconnect with Alcatel OXO 7?
-
Allwin (billing software) does not work
-
AMS (Autonomous Metering System) - protocol IEC 62056-21
-
AMS (Autonomous Metering System) - protocol M-Bus
-
AMS error codes description (M-Bus, IEC 62056-21, S0, IN, ONF)
-
AMS for IN1 IN2 IN3 (pulses S0, analog value, digital value)
-
Analogue modems - supported protocols by 2N® EasyGate and 2N® SmartGate
-
Answering Unit Registration and Configuration of Calls in My2N
-
Anti-passback - How to configure in 2N Access Commander
-
Apartment admin - Guest access
-
APS reader - Connection of lock and card reader (APS) including jumper configuration to 2N IP Vario
-
Asterisk - How to interconnect with Asterisk?
-
Attendance and Presence - How to configure in 2N Access Commander
-
Audio files - Progress tones - Required format in 2N Netstar
-
Audio-relay card - How to set up jumpers on NetStar
-
Audio - What can I do when call is connected but I can't hear any voice? (RTP packets are empty)
-
Audio - What should I do if I can't hear ringback tone?
-
Audio - What to check if I have voice quality issue?
-
Audio - What to check if You can't hear the ring-back tone?
-
Audio - What to check if you have voice quality issue?
-
AutoCLIP routing - How to set AutoCLIP routing?
-
AutoCLIP Routing - How to set in 2N VoiceBlue MAX
-
AutoCLIP routing is enabled but not working
-
AutoClip Routing on NetStar
-
Automatic startup of 2N Access Commander BOX after a power outage
-
Automation, 2FA - How to configure 2FA on 2N IP Intercoms
-
Automation, Black/whitelist - How to block or allow specific numbers to call an intercom
-
Automation, Callback - How to configure callback with 2N IP Intercom to My2N
-
Automation, Call Delay - how to set a different ring time for diferent call destinations
-
Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
-
Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
-
Automation, Card Call - Initiating a call after card verification
-
Automation, DoorOpenTooLong - Securing door against excessively long opening on 2N IP Intercoms
-
Automation, Multicast - Configuring Lock/Unlock all feature on 2N IP Intercoms
-
Automation, Multicast - How to receive multicast paging from up to 5 sources
-
Automation, Multicast paging - How to configure paging from 2N IP Intercoms
-
Automation, Multicast - Receiving multicast paging from up to 5 sources
-
Automation (Node-RED) in Access Commander
-
Automation, one-time access - How to set up one-time codes with automation
-
Automation, OpenDoor - Controling the card reader signalization
-
Automation, Silent Alarm - How to configure silent alarm on 2N IP Intercoms
-
Automation, UnauthorisedDoorOpen - Securing doors against unauthorised door opening in 2N IP Intercoms
-
Auto Provisioning via TFTP
-
AUX card - I'm connected via RS232 to COM2(AUX card) and I cannot upload new voice messages
-
Avaya - How to interconnect with Avaya Aura Communication Manager using ISDN
-
Avaya - How to interconnect with Avaya Aura Communication Manager using SIP
-
Axis camera in 2N Indoor Touch
-
Axis network intercom into My2N
-
Axis Network I/O Relay - Controlling using HTTP commands
-
Backup and setting restore - 2N Access Commander
-
Battery failure signalization - EasyGate PRO ""snake"" signal strength
-
Battery replacement
-
Beta testing
-
Bluetooth authentication - How to configure it in 2N® Access Commander
-
Bluetooth Card Mode - how to setup My2n App and use the feature
-
Bluetooth - Encryption Keys for Location
-
Bluetooth Motion Mode - how to setup My2n App and use the feature
-
Bluetooth Tap in App Mode - how to setup My2n App and use the feature
-
Bluetooth Touch Mode - how to setup My2n App and use the feature
-
Busy tone - When the button is pressed, 2N Analog Intercom gives the busy tone
-
Calculating data consumption on LTE Verso
-
Callback - How to set Callback on 2N VoiceBlue MAX?
-
Callback - How to set Callback on ViceBlue Next?
-
Callback - How to set SMS Callback on VoiceBlue Next
-
Call between 2N LiftIP and IP Phone with AXIS Camera Feed
-
Call disconnection - What to do if a call is not ended immediately?
-
Call disconnection - What to do if a call still continues up to 30s after call ended?
-
Calling - A call is not disconnected immediately
-
Calling between 2N Lift8 and IP Phone via VoIP module
-
Calling between 2N LiftIP and IP Phone
-
Calling - How many simultaneous calls can I do with 2N EasyGate?
-
Calling - How many simultaneous calls can I do with 2N SmartGate?
-
Calling locally between 2N IP intercom and 2N IP Phone D7A
-
Calling - Outgoing call through BRI Lite/Enterprise is rejected
-
Calling through the My2N SIP Proxy will enable you to call between devices listed in your My2N account
-
Call in sequence or parallel using My2N
-
Call logs - How to use them in 2N Access Commander
-
Call recording - how to record marked calls on NetStar?
-
Call routing - Call to GSM number goes over PRI2 interface
-
Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N BRI Lite and BRI Enterprise
-
Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N StarGate and 2N® BlueTower
-
Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N VoiceBlue Next
-
Call routing - Forwarding call to one extension number - VoiceBlue Next
-
Call routing - How can I allow dynamic CLIP routing?
-
Call routing - How can I route all incoming calls to receptionist or operator?
-
Call routing - How many simultaneous calls can I do?
-
Call routing - SIM selection based on called number
-
Call routing - SIM selection based on called number (version 1.19 and lower) on VoiceBlue Next
-
Calls from 2N Indoor Touch to 2N IP Intercom
-
Call transfer doesnt work and why?
-
Camera settings guide for 2N IP Style
-
Can I send a FAX with my 2N OfficeRoute?
-
Can I use 2N BRI Lite or 2N BRI Enterprise with my PBB?
-
Cannot add a device to My2N/move a device to a different My2N account
-
Capture network and logs - Lift IP 2.0
-
Capture network traces in Sentrio
-
Card reader gets stuck
-
CCM Express version 4.1 - How to interconnect with CCM Express version 4.1?
-
CDR - How can I delete CDR?
-
Certification for web authentication
-
Change of billing information (company name & address) in My2N
-
Change to the new apartment license model in My2N
-
CLIP - Does 2N EasyGate support CLIP function?
-
CLIP - Does 2N SmartGate support CLIP function?
-
CLIP - Incoming CALL ID transfer to phone or PBX
-
CLIP is NOT displayed on analogue lines CO
-
Communication between 2N Indoor Compact and 2N IP intercom via Device ID
-
Communication via Device ID of 2N IP intercom
-
Company Admin - Add/Delete
-
Comparison of IP Verso and LTE Verso
-
Compatibility Mode in Access Commander
-
Conference - How to create a conference call and conference room
-
Configurating 2N IP Mobile v.4 to call over a SIP proxy. Skip to end of metadata
-
Configurating 2N Lift1 via SMS in combination with 2N EasyGate Pro
-
Configuration backup and troubleshooting EasyGate IP
-
Configuration backup - How to backup a configuration and how to capture a trace for 2N SIP Speaker (Horn)
-
Configuration backup - How to backup configuration and how to capture a trace - 2N Lift8
-
Configuration - Can I use 2N VoiceBlue Next with my PBX?
-
Configuration - How do I configure 2N VoiceBlue Lite?
-
Configuration - How to program 2N EasyGate?
-
Configuration - How to program 2N SmartGate?
-
Configuration - How to set 2N VoiceBlue MAX
-
Configuration - How to set 2N VoiceBlue Next?
-
Configuration of electrical outputs on 2N IP Intercoms
-
Configuration of the switch codes on the My2N Cloud
-
Configuration Tool Download
-
Configuring email notification on 2N indoor Touch
-
Configuring HTTP Commands on 2N Indoor Compact
-
Configuring Wildix VoIP PBX with 2N IP Intercom
-
confirmation-mode-how-to-configure-confirmation-mode-on-2n-lift1
-
Confirmation-mode-How-to-configure-confirmation-mode-on-2N-Lift8
-
Congifuring more unlock buttons in 2N Answering Units
-
Connect 2N IP Phone D7A to My2N
-
Connecting 2N SingleTalk via Well ATA-172P converter to VoIP server
-
Connecting an old intercom to a 2N Access Unit using a 2N Security Relay
-
Connecting bell button to 2N Indoor Touch 2.0
-
Connecting Doorbell to the 2N OS Indoor Units
-
Connecting WaveStore VMS to 2N IP Intercom
-
Connection and configuration of a door contact to 2N IP Intercom/Access Unit
-
Connection - Can I use 2N EasyGate instead of the landline?
-
Connection - How can I connect SmartGate?
-
Connection of 2 devices to one lock
-
Connection of external buttons to the 2N IP Intercom
-
Connection options - What are the possibilities of connection of 2N SingleTalk?
-
Connection via HyperTerminal - How can I connect to VoiceBlue Lite using HyperTerminal?
-
Connection via HyperTerminal - How can I connect using HyperTerminal?
-
Connection via Putty - How can I connect using Putty?
-
Connectors and LED in 2N LTE Verso
-
Creation of SIP Trunk
-
Credit check - How can I recognize an amount of credit on my SIM card?
-
Credit check - How to check credit of SIM card?
-
Credit - How can I check balance on my SIM card? (USSD commands usage)
-
CSV Import of users with their details
-
CSV Synchronization - import / remove / update users and user's details
-
CTI Interface - How to set up_version 3.X.X
-
CUCM - How to interconnect with CISCO Call Manager 6, 7, 8?
-
Custom language localization in 2N IP Mobile Application
-
Dashboard and widgets in 2N Access Commander
-
Data and voice - Is it possible to make a voice call and data transferring at the same time?
-
Database backup - How to backup the database and how to capture a trace 2N NetStar SW
-
Database - How to backup database of 2N IP Audio Manager
-
Data transfer - Does 2N VoiceBlue Next gateway support data transfer?
-
Data - Which interfaces can be used for a data call with 2N EasyGate?
-
Data - Which interfaces can be used for a data call with 2N SmartGate?
-
Deep clean cookies and site data of Access Commander's webpage
-
Default login credentials
-
Deleting 2N EasyGate IP from 2N Elevator Center
-
Delivery solution with My2N automation
-
Description and properties of 2N Indoor Touch 2.0
-
Device IP Callback
-
Device Security - Certificate Validation feature
-
Diagnostics logs
-
Dial plan - How to adjust the number of outgoing call?
-
Dialthru gateway - How to set 2N NetStar as a dialthru gateway
-
Difference between logins in My2N app
-
Difference between Standalone and TCP Client mode in 2N SmartCOM (PRO)
-
Differences between the old model 2N Indoor Touch and new one 2N Indoor Touch 2.0
-
Direct call - How to set up a 2N IP Handset for a direct SIP call (without PBX) and how to open door
-
Direct calling to 2N Indoor Talk from the AXIS door station AXIS A8004-VE
-
Direct calling to 2N Indoor Touch 2.0 from AXIS A8207-VE
-
Direct calling to 2N Indoor Touch 2.0 from the AXIS door station AXIS A8004-VE
-
Direct calling to 2N Indoor Touch 2.0 from the AXIS door station AXIS A8105-E
-
Direct call without SIP Proxy registration
-
Directory setup of 2N IP Style
-
Disabling the video preview with the 2N IP intercom outside the call?
-
Display configuration
-
Display customization of 2N IP Style
-
Display - How to set up display of a device in 2N Access Commander
-
Do 2N BRI Lite and 2N BRI Enterprise support data transfers?
-
Do 2N VoiceBlue Lite gateways support data transfer?
-
Does the 2N OfficeRoute support HSPA technology?
-
Door lock does not open after dialing 00
-
Door section - configuration on the 2N IP Intercoms
-
Download configuration backup in 2N Sentrio
-
Download Configuration - Lift IP 2.0
-
Downloading network trace, syslog and configuration file from 2N Indoor Touch 2.0
-
Do you hear some clicking during the call or the call is even disconnected?
-
EasyGate - Data and voice - Is it possible to make a voice call and data transferring at the same time?
-
Easy Gate IP Battery reset
-
Easy unlock and call hang in one step
-
Elastix PBX - How to interconnect with Elastix PBX?
-
Electric locks in 2N IP Intercom accessories
-
Electronic lock groups - how to efficiently set up more 2N Fortis devices in an installation
-
Elevator Center - user rights and differences
-
Email to SMS - how to set it in 2N NetStar
-
E-mail to SMS - How to set up
-
Enforcer corner IP Camera - 2N Sentrio / LiftIP 2.0
-
Ethernet port - 2N SmartCom PRO ETH configuration
-
Event reporting on 2N BRI Lite and 2N BRI Enterprise
-
extending-cancel-input-how-to-use-cancel-input
-
Extending switch - How many switches could be connected to 2N SingleTalk?
-
External Axis IP camera connection to LiftIP 2.0
-
External IP Relay 9137410E & 9137411E - Controlling using HTTP commands from a 2N IP intercom or 2N Access Unit
-
External LEDs - How to connect/disconnect external LED diods of 2N Lift1 car unit
-
External LEDs - How to connect/disconnect external LED diods of 2N Lift8 car unit
-
External storage - How to create an external storage
-
External USB readers - Driver installation & usage
-
External USB RFID reader 125kHz EMarine - Usage without any additional driver
-
Factory Reset - Easy Gate IP
-
Factory reset - How to do factory reset for 2N Fortis devices
-
Factory reset - How to do factory reset for 2N Indoor Compact
-
Factory reset - How to do factory reset for 2N Indoor Talk
-
Factory reset - How to do factory reset on 2N Clip
-
Factory reset - How to make a factory reset
-
Factory reset - How to make a factory reset
-
Factory reset - How to make a factory reset for 2N Net Audio devices
-
Factory reset - How to make a factory reset of 2N BRI Lite/Enterprise
-
Factory reset - How to make a factory reset of 2N NetStar
-
Factory reset - How to make a factory reset on 2N Analog Intercom
-
Factory reset - How to make a factory reset on 2N Lift1
-
Factory-reset-How-to-make-a-factory-reset-on-2N-Lift8
-
Factory reset - How to make a factory reset VBM EN
-
Factory reset - How to make a factory reset VBN
-
Factory reset - How to perform factory reset of 2N NetStar
-
Factory reset - How to reset the settings of 2N IP Handset to the factory values
-
Factory reset - Lift IP 2.0
-
Factory reset of the 2N Access Commander Box
-
Factory reset on 2N Access Units
-
Factory reset on 2N LiftGate
-
Factory-resetting-the-2N-LiftIP
-
Factory setting (Default factory settings) - How to setup a Factory setting in 2N Indoor Touch
-
Failure of network storage manager
-
FAX - How to configure
-
FAX - How to send FAX message or data to GSM and from GSM?
-
FAX - How to send or receive FAX message or data?
-
Fax - How to solve a problem with faxing over GSM network?
-
Firmware 2N VoiceBlue Lite - How can I upgrade firmware?
-
Firmware - Can I use firmware 03.00.xx?
-
Firmware compatibility across 2N Access Commander versions
-
Firmware downgrade - Is it possible to downgrade 2N NetStar?
-
Firmware - How to make a firmware upgrade
-
Firmware update - How to do firmware update for 2N Net Audio devices
-
Firmware Update - How to do firmware update on 2N VoiceBlue MAX?
-
Firmware Update via My2N
-
Firmware update – How to do FW update or factory reset of 2N Indoor Touch 2.0
-
Firmware upgrade for IP Sentrio
-
Firmware upgrade - How to do firmware upgrade on device 2N Clip
-
Firmware upgrade - How to make a firmware upgrade
-
Firmware upgrade - How to make a firmware upgrade of 2N Access Unit?
-
Firmware upgrade - How to make a firmware upgrade of 2N NetStar
-
Firmware Upgrade - How to make a firmware upgrade on 2N BRI Lite and 2N BRI Enterprise?
-
Firmware upgrade - How to make a firmware upgrade on 2N Indoor Compact
-
Firmware upgrade - How to make a firmware upgrade on 2N Lift1
-
Firmware Upgrade - How to make a firmware upgrade on 2N VoiceBlue Next?
-
Firmware upgrade - How to make a firmware upgrade on 2N® Indoor Talk
-
Firmware-upgrade-How-to-make-firmware-upgrade-on-2N-EasyGate-IP
-
Firmware version numbering, configuration tool version numbering
-
Format of audio tones
-
Forwarding call does not work. What should I check?
-
Free minutes - All free minutes are exceeded and I still want to be able to make calls GSM
-
Free minutes - How to set them on 2N NetStar
-
Free minutes - I want to use only free minutes on my SIM cards. What should I set it?
-
Free minutes - Why is SIM1 still connected to the network after all free minutes have been used?
-
Functionality-of-the-P100-Protocol-in-2N-Lift-Products
-
Gmail SMTP Service - How to configure with Intercom units
-
Gmail: Unable to send emails or log in after 2022-05-30?
-
Grandstream GXV3140 - How to set it up with a 2N IP Intercom
-
Grandstream GXV3175v2 - How to set it up with a 2N IP Intercom
-
Grandstream GXV3240 - How to set it up with a 2N IP Intercom
-
Grandstream GXV3275 - How to set it up with 2N IP Intercom
-
Grounding-How-to-ground-2N-SingleTalk
-
GSM to VoiceMail - How to route all incoming calls from GSM to VoiceMail
-
H.323 trunk - How to configure
-
Hardware - Compatibility of hardware between the latest (M202) and old (M112) CPU
-
Hardware grounding - How to ground 2N EasyGate and 2N SmartGate
-
Hardware - How to upgrade older 2N StarGate to the latest HW version
-
Hardware versions - Difference between 2N Lift1 HW version 1 and 2N Lift1 HW version 2
-
HiPath 3000 - How to interconnect with Siemens HiPath 3000?
-
Homebridge plugin for 2N intercoms
-
How many ME users can I use?
-
How many simultaneous calls can be made at once through one 2N BRI Lite or 2N BRI Enterprise?
-
How many system (key) phones can be used on Omega?
-
How many UMTS channels has got the 2N OfficeRoute?
-
How to add a 3rd party SIP device/Application
-
How to add Japanese language on 2N Clip Display (as a custom language)
-
How to add Japanese language on 2N Indoor View Display (as a custom language)
-
How to add Japanese language on IP Style Display (as a custom language)
-
How to add smartphone or tablet in My2N account
-
How to add the Easy Gate IP to the 2N Elevator Center - FAQ_Lift_private
-
How to backup configuration and how to capture a trace on 2N Access Unit
-
How to backup database of 2N SIP Mic
-
How to backup the database and how to capture a trace 2N NetStar
-
How to change credit card information
-
How to change the password of VPN connection for MikroTik?
-
How to configure 2N Indoor Touch 1.0 to make and receive calls through My2N
-
How to configure 2N Indoor Touch 2.0 to make and receive calls through My2N
-
How to configure call settings for the IP intercom from My2N platform
-
How to configure communication port on RS-232/RS-485 interfaces
-
How to configure HTTP Commands on 2N Indoor View
-
How to configure sending of SMS messages via SMPP feature on 2N gateways
-
How to configure Wireless M-Bus port
-
How to configure Wireless M-Bus port on 2N SmartCom PRO with fw 1.13.x and latest
-
How to connect a 2N GSM gateway to an IP PBX
-
How to connect a doorbell button to 2N Indoor Touch?
-
How to connect external Axis Camera to Sentrio
-
How to connect M-Bus device to 2N SmartCOM PRO ETH?
-
How to connect meter supporting protocol IEC 62056-21 to 2N SmartCOM PRO ETH?
-
How to connect meter with pulse output (S0) to 2N SmartCOM PRO ETH?
-
How to connect WM-Bus meter to 2N SmartCOM PRO (ETH)?
-
How to connect WM-Bus meter to 2N SmartCOM PRO (ETH)?
-
How to connect ZigBee device to 2N SmartCOM PRO (ETH)?
-
How to control 2N Indoor Touch via Automation of 2N IP intercom
-
How to deny malicious calls from internet that make enormous bills on OfficeRoute
-
How to deny malicious calls from internet which make enormous bills on Office Route
-
How to detect M-Bus meters by AT command
-
How to detect M-Bus meters by SMS
-
How to do factory reset for 2N Indoor View
-
How to do firmware update?
-
How to do FW update or factory reset of 2N Indoor Touch?
-
How to do the module FW upgrade
-
How to edit the called number from PBX on 2N BRI Lite and 2N BRI Enterprise?
-
How to enable and use Multifactor Authentication (MFA) in My2N Platform
-
How to enable external camera on My2N
-
How to fix push notifications for Android OS
-
How to generate HAR file for Chrome
-
How to get ip address - Lift 8
-
How to get network trace and logs from the 2N Indoor Touch
-
How to get the Omega PBX to default values?
-
How to install 2N Clip 2Wire-IP
-
How to install a 3rd party Android application on 2N Indoor Touch?
-
How to install AoC reader with 2N NetStar
-
How to integrate 2N IP Devices with MS Teams
-
How to integrate one or more Dormakaba locks in your My2N site
-
How to make a custom ringtone for Mobile Video application on iOS
-
How to make a factory reset of 2N Office Route?
-
How to make a firmware upgrade on 2N Indoor View
-
How to make a firmware upgrade on 2N Lift8
-
How to make an a update - Lift IP 2.0
-
How to provide all information to effectively resolve a technical issue
-
How to provide all information to effectively resolve a technical issue on 2N Access Unit?
-
How to provide all information to effectively resolve a technical issue on 2N EasyGate
-
How to provide all information to effectively resolve a technical issue on 2N NetStar?
-
How to provide all information to effectively resolve a technical issue on 2N NetStar SW?
-
How to provide all information to effectively resolve a technical issue on 2N SmartGate
-
How to provide all information to effectively resolve a technical issue on 2N StarGate or 2N BlueTower?
-
How to provide all information to effectively resolve a technical issue on SIP Audio
-
How to provide all information to effectively resolve a technical issue on the 2N VoiceBlue MAX?
-
How to provide all information to effectively resolve a technical issue on the 2N VoiceBlue Next?
-
How to provide all information to effectively resolve a technical issue with 2N Indoor Talk
-
How to provide all information to effectively resolve a technical issue with 2N Indoor Touch
-
How to provide all information to effectively resolve a technical issue with 2N Indoor View
-
How to provide all information to effectively resolve a technical issue with 2N OS device
-
How to provide logs from the My2N application
-
How to purchase subscription in My2N
-
How to read analog value on input 2N SmartCOM PRO ETH?
-
How to read data from 2N SmartCOM (PRO) memory?
-
How to report an issue on 2N SIM Star?
-
How to report a problem on Omega series?
-
How to report a technical issue with the 2N VoiceBlue MAX
-
How to report technical issue - 2N SmartCom/2N SmartCom PRO
-
How to report technical issue on 2N EasyRoute / 2N SpeedRoute
-
How to report technical issue on 2N OfficeRoute?
-
How to restrict calling from the My2N app to the 2N Intercom
-
How to seamlessly switch from 2N Mobile Video to the My2N app
-
How to send and receive a SMS
-
How to send/receive separate multicast streams on 2N IP Intercoms via Automation
-
How to set a call simulation on 2N SIM Star Server?
-
How to setup alternative phonebook in My2N
-
How to setup FXS to GSM calls with VoIP backup on 2N VoiceBlue MAX
-
How to set up My2N app access
-
How to set up Offline Pairing
-
How to set up Prepaid Wi-Fi Hotspot
-
How to switch between the internal and external camera from 2N Indoor Touch
-
How to unlock the door with the switch codes in My2N
-
How to upgrade firmware from 4.05 or earlier to 4.06 or higher on Omega?
-
How to upgrade Records Manager
-
How to use external notifications and connect with relay on the 2N Indoor Touch?
-
How to use Group Authentication / Access key in communication between 2N IP Intercoms and 2N Indoor Touch
-
How to use the DnD (Do not Disturb) mode on 2N Indoor Touch?
-
How to use the Video voice mail on 2N Indoor Touch?
-
HTTP API - 2N Indoor Touch relay control using 2N IP Verso automation
-
HTTP API - 2N Indoor Touch relay control using 2N IP Verso automation
-
HTTP API - Configuration upload
-
HTTP commands
-
HTTP Commands – How to configure them in Answering units
-
HTTP - How to trigger pre-recorded announcement message by HTTP command
-
HTTP REST API
-
Iam not able to connect to the configuration interface of OfficeRoute
-
I did not received an e-mail
-
I don't get screenshots of missed calls in My2n App or in answering unit history call
-
ID Tables - How to set it in 2N NetStar
-
I forgot the Admin password
-
if-you-need-to-change-an-ip-of-the-2n-officeroute
-
I have a mobile with Android version 8 or 9 and want to use my2n App
-
Import of users from device
-
incoming-call-drops-after-first-ring
-
Induction loop for 2N IP Intercoms and Answering units
-
INIT status - What is necessary to check, if INIT led light on VoIP card shines red?
-
INIT status - What to do if all cards are still in "INIT" status?
-
INIT status - What to do if VoIP card is still in INIT status?
-
INIT status - Why is Init LED blinking on GSM or UMTS card on 2N StarGate or 2N BlueTower?
-
Innovaphone PBX (IP302) - How to interconnect with Innovaphone PBX (IP302)?
-
Input circuit - 2N SmartCom/2N SmartCom PRO calibration
-
Input S0 - 2N SmartCom/2N SmartCom PRO S0 pulse counting
-
Installation and Configuration of Lift8 for Multiple Shafts
-
Installation - How to install 2N SIM Star Server?
-
Installation - How to install a new gateway? - Step-by-step guide
-
Installation name of 2N Access Commander
-
Installation of virtual machine and Box solutions
-
Integration the Grandstream HT801 with 2N IP Intercom
-
Interconnection - Can I use 2N EasyGate with my PBX?
-
Intergration Loxone Miniserver with 2N intercom
-
Internet connection does not work on 2N SpeedRoute or 2N EasyRoute
-
Internet Radio - How to set up
-
Interoperability manual for Gigaset DX800A
-
iOS 14 & macOS Big Sur - Issues with accessing website
-
iOS - no video preview (Fullscreen / Banner mode)
-
IP Address - How to find the IP address of the 2N SIP Mic
-
IP address - How to get IP address of 2N Access Units?
-
IP address - How to setup static / dynamic IP address
-
IP Sentrio - Factory reset
-
IP setting - How can I change the IP address of 2N VoiceBlue Lite?
-
IP setting - How can I use NAT keep alive?
-
IP setting - How to call through gateway on private network from public network?
-
IP setting - How to find out the IP address?
-
IP setting - How to register the gateway on domain name instead of IP address?
-
IP setting - How to register the gateway on domain name instead of IP address?
-
IP setting - How to set the default GW/mask for the IP of VoIP card?
-
ISDN - Basic principle of VOIP operation and ISDN synchronization
-
ISDN trunk interconnection Alcatel
-
ISDN trunk interconnection Siemens
-
Issues accessing the web interface on macOS
-
IVR - How to create (without 2N IVR Editor)
-
IVR - How to set it in 2N Netstar
-
I want to start using the My2N app instead of Mobile Key, but I do not see the „+“ icon in the My2N app to start the PIN pairing flow, what should I do?
-
Keyboard layout - How to set different keyboard layout in Linux of 2N Access Commander
-
Keypad issue with 2N IP Vario - some keys do not work
-
KNX connectivity with 2N IP Intercoms
-
Language mutation - How to create own language mutation for 2N IP Intercoms
-
LCR - How to use
-
LDAP - How to synchronise Phone book in 2N NetStar via LDAP protocol
-
LDAP - Users synchronisation from a remote directory
-
LED indication - 2N SmartCom/2N SmartCom LED indication
-
Legacy tools - M112 CPU
-
License - 2N SmartCom server
-
License extension - I need to extend my license for 2N StarGate or 2N BlueTower. What information should I give you?
-
License - How can I use license key?
-
License - How to get a license for 2N IP Intercom
-
License - How to upload licenses?
-
License Plate Recognition (LPR)
-
Licenses on VoiceBlue Next - Detailed information
-
License status: Locked
-
License - What information is needed for generating license?
-
Licensing since the version 2.0 in 2N Access Commander
-
Lift 8 Configuration for Multiple Shafts
-
Lift access control - configuring 2N systems
-
Lift IP 2.0 factory reset
-
List of tested 3rd party applications that can be installed on 2N Indoor Touch
-
Lockdown feature in 2N Access Commander
-
LOG file - I see the message "HCX err" in the gateway log. What does it mean?
-
Login details for Control panel in SW version 1.3.6 or higher
-
Logs management
-
Loudspeaker - How to properly connect loudspeaker
-
LTE Debug Module – how to use it?
-
LTE Verso - How to calculate data consumption
-
Management over the Internet
-
MicroSD card - A list of tested and approved MicroSD cards for 2N Indoor Touch 2.0
-
MicroSD card - List of tested 3rd party MicroSD cards
-
MicroSIP - Direct call with 2N IP Intercom
-
Microsoft Outlook - How to integrate Microsoft Outlook with 2N Netstar
-
MIFARE DESFire EV2/EV3 - How to install 2N PICard Commander and program cards
-
Migrate configuration from old installation to new one (the same version)
-
Milestone integration - How to setup with 2N Access Commander
-
Milestone XProtect - Alarm event from 2N device on Milestone XProtect
-
Milestone XProtect and 2N IP Intercom integration
-
Milestone XProtect - How to add, monitor and control door units stored in 2N Access Commander
-
Milestone XProtect - How to display video tracks and event information surrounding an access by a user from 2N Access Commander
-
Milestone XProtect Smart Client - log operator's actions
-
Milestone XProtect - Video Pop-up on 2N Device's Action
-
Mobile Video troubleshooting
-
Mobility Extension - How can I configure Mobility Extension?
-
Mobility Extension - How to configure
-
Mobility Extension - How to create ME in 2N NetStar or 2N NetStar SW
-
Mobility Extension - How to set Mobility Extension on VoiceBlue Next?
-
Mobility Extension (ME) for a user on Omega
-
Monitoring of batteries on EasyGate PRO
-
Multicast Discovery function on 2N Indoor Touch 2.0
-
Multicast Discovery - What is it good for
-
Multicast Stream configuration with IP Audio Manager
-
My2N - 2N Mobile video credit vouchers and licenses
-
My2N account management (company/site admins & users)
-
My2N and Apple watch
-
My2N apartment Admin Features
-
My2N app and 3rd party apps
-
My2N App Offline Pairing - Opening doors via Bluetooth
-
My2N App on AppleWatch Access via complications (widgets)
-
My2N, how to activate Access Units switches from the App with API opening
-
My2N - How to sign up
-
My2N/KONE integration
-
My2N - Low audio issue
-
My2N platform and 3rd party SIP calls
-
MY2N Platform Security Overview
-
My SIM in Omega card does not log into network. Why?
-
Netstar diagnostic tool pinout
-
NetStar unreachable from the programming tool
-
Network proxy settings in 2N Access Commander – what they are and when to use them
-
Network Trace - How to get Wireshark network trace and network trace from 2N BRI Lite / Enterprise?
-
Network Trace - How to get Wireshark network trace and network trace from 2N StarGate / 2N BlueTower?
-
Network Trace - How to get Wireshark network trace and network trace from 2N VoiceBlue MAX?
-
Network Trace - How to get Wireshark network trace and network trace from 2N VoiceBlue Next?
-
New API Authentication Method for My2N Integrations
-
New Site models - Differences and Examples
-
No card except of CPU is on after you switch on the NetStar?
-
Normalization - How to use
-
No tones - I can't hear any tones on 2N VoiceBlue Lite when setting up a call. What should I do?
-
No video? Try to check the following solutions!
-
NS Admin Tool - Supported operating systems
-
Occupancy Management in 2N Access Commander
-
Offline Bluetooth pairing and modes (Tap In App, Touch On Device, Card, Motion Detection)
-
One-button call setup of 2N Analogue Vario
-
One card for 2N Fortis and 2N Picard at the same time
-
One click unlocking and hanging up mode
-
OpenVPN server & client
-
Output relay - How to use it?
-
Overview of the Ports, Domains and Codecs of My2N and Elevator Center
-
panasonic-ncp-how-to-interconnect-with-panasonic-ncp-pbx
-
Password recovery in 2N OS devices
-
Password RS232 - 2N SmartCom/2N SmartCom PRO against unauthorized configuration
-
PBX booster - How to set 2N NetStar as a PBX booster
-
PC Operator and Application server - How to install it in 2N NetStar
-
Peer-to-peer call to 2N Indoor Compact from the AXIS door station A8004-VE
-
Peer-to-peer call to 2N Indoor Compact from the AXIS door station AXIS A8105-E
-
Peer-to-peer call to 2N Indoor Compact from the AXIS door station AXIS A8207-VE
-
Peer-to-peer call to 2N Indoor Talk from the AXIS door station AXIS A8105-E
-
Peer-to-peer call to 2N Indoor Talk from the AXIS door station AXIS A8207-VE
-
Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8004-VE
-
Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8105-E
-
Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8207-VE
-
Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8004-VE
-
Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8105-E
-
Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8207-VE
-
phone-line-compatibility-2n-lift1-2n-lift8-a-2n-lift-ip
-
Port Forwarding - I am not able to access any port specified in Port Forwarding
-
Port Randomization in 2N IP Mobile (Intercoms)
-
PRI card - What to check if LED Lay 1 and/or 2 on PRI card do not light up/blink
-
PRI gateway - How to set 2N NetStar as a PRI gateway
-
Problems with sending and receiving emails from NS
-
Problem with opening a configuration in service tool for LIft 8
-
Programming - Entering the programming menu
-
Providing all information to effectively resolve a technical issue on 2N Lift8
-
Providing technical information to effectively resolve a technical issue on 2N Lift1
-
QR code creating and sending over e-mail
-
Recording - How to record the calls on VoIP trunk and PRI interface
-
Recording your own user message for 2N Lift8
-
Register a 2N IP Handset to My2N or another PBX / proxy server
-
Registration of 2N Lift8 to 2N OfficeRoute
-
Registration of LTE Verso to My2N and basic setup
-
Remote Control - How to make it work with 2N Net Audio Decoder?
-
Remote control - How to setup and use Remote Control over GSM?
-
Reporting a technical problem with 2N IP Handset device (firmware, reset, backup, trace, logs)
-
Reports - what data are exported
-
REX button connectivity
-
REX button - How to connect to a 2N Access Unit
-
RFID Card/RFID Tag Configuration
-
RMA - What to check before the RMA process for 2N analog gateway
-
RMA - What to check before the RMA process for 2N analog Intercoms
-
RMA - What to check before the RMA process for 2N analog Intercoms
-
RMA - What to check before the RMA process for 2N Lift1
-
RMA - What to check before the RMA process for 2N Lift8
-
RMA - What to check before the RMA process for 2N LiftIP
-
RMA - What to check before the RMA process for 2N Net Audio devices
-
RTP destinations - How to test it with VLC media player?
-
Scheduler - How to set up
-
Scheduler - How to use Announcement Scheduler
-
Sending SMS upon input trigger
-
Sending SMS upon input trigger on EasyGate IP
-
Sensitivity - Access_private
-
Server logs - 2N SmartCom server
-
Service password - I forgot the service password
-
Services with your Linksys phones do not work
-
Setting 3rd party IP camera in 2N Indoor View
-
Settings of 2N OfficeRoute as a GW for Siemens OpenScape PBX
-
Setting up 2N IP Intercom with SNOM 760 phone
-
Setting up a call between 2N LiftIP / Lift8 with VoIP module and 2N VoiceBlue Next gateway
-
Setting up call from a 2N IP intercom to a 2N Indoor Talk and vice versa
-
Setting up call from/to 2N IP Intercom in 2N Indoor Touch 2.0
-
Setting up calls from and to 2N IP intercom
-
Setting up direct call betwenn 2N LiftIP with an external IP camera (Revotech) and IP phone (Grandstream GXV3275)
-
Setting up Grandstream GXV3672 for external camera for 2N IP Intercom
-
Setting up static IP address on 2N LiftIP
-
Seznam SMTP service - How to configure with Intercom units
-
SIM card logging - What to check if SIM card is not logging?
-
SIM card logging - What to check if SIM cards do not log into network?
-
SIM card usage - How to switch SIM card every 4 hours?
-
SIM card usage - How to switch SIM cards at the specific time of day?
-
SIM card usage - How to use both SIM cards equally?
-
SIM card - What to check if SIM card does not log to GSM network?
-
SIP calling using My2N
-
SIP over UDP Support Ending in November 2025
-
SIP Provisioning - How to set it in 2N NetStar
-
SIP Proxy - How many users can be registered?
-
SIP Proxy - How to create it and add VoIP terminal
-
SIP Proxy - How to register 2N IP Intercom to 2N Netstar or 2N Netstar SW
-
SIP Proxy port - How to change it from default 5060
-
SIP Proxy registration
-
SIP Proxy registration on Answering Units with 2N OS
-
SIP Proxy registration on IP intercoms
-
Site models - Differences and Examples
-
Sizes of Spindle and Cylinder for project
-
Slideshow on 2N IP Intercoms display
-
SMPP connection - How to connect ActiveXperts SMPP server
-
SMPP connection - How to connect Diafaan SMPP server
-
SMS at no answer - How to set it in 2N NetStar
-
SMS at no answer - How to set "SMS at no answer" on 2N VoiceBlue MAX
-
SMS at no answer - How to setup "SMS at no answer"?
-
SMS at no answer - SMS at no aswer does not contain the called party number
-
SMS CallBack - How to set in 2N NetStar
-
SMS messages - How does "messaging control" work on VoiceBlue Next (SMS queues)?
-
SMS messages - How to configure Email2SMS and SMS2Email features with Microsoft Outlook for VBN?
-
SMS messages - How to configure Email2SMS and SMS2Email features with Mozilla Thunderbird on VoiceBlue NEXT?
-
SMS messages - How to configure Email2SMS and SMS2Email features with Windows Live Mail?
-
SMS messages - How to send and receive messages? - SMS gateway integration
-
SMS messages - How to send and receive messages with Microsoft Exchange server?
-
SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Microsoft Outlook?
-
SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Mozilla Thunderbird?
-
SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Windows Live Mail?
-
SMS messages on VoiceBlue Next - How to set SMS at no answer?
-
SMS programming - How to configure 2N Lift8 over SMS messages
-
SMS reader - How to install it with 2N NetStar
-
SMS to EMAIL - How to set it in 2N Netstar
-
SMTP and notifications - How to set in 2N Access Commander
-
SMTP Gmail service configuration in 2N Access Commander
-
SNMP - How to configure SNMP
-
SNOM 870 - Setup with 2N IP Intercom
-
Specification of Maximum capacity in 2N VoiceBlue Next
-
SSH - How to connect over SSH to 2N Access Commander
-
SSL / TLS - CA certificate - How to add certificate authority to Linux of 2N Access Commander
-
SSL / TLS - User certificate - How to add CA signed user certificate to 2N Access Commander web
-
Starting manual for integration with 2N IP Intercoms
-
Static IP address - How to set a static IP address on a 2N Indoor Touch 2.0
-
Static IP address - How to set up static IP address
-
Static IP address - How to set up static IP address
-
Static IP address - How to set up static IP address for 2N NetStar
-
Static IP address - How to set up static IP address for 2N SIP Audio products
-
Static IP address - How to set up static IP address for 2N SIP Audio products
-
Static IP address - How to set up static IP address in 2N Access Commander
-
Static IP address - How to set up static IP address on 2N Access Units?
-
Static IP address - How to set up static IP address on 2N BRI Lite/Enterprise
-
Static-IP-address-How-to-set-up-static-IP-address-on-2N-Lift8
-
Static IP address - How to set up static IP address on VBN?
-
Static IP address - How to set up static IP address SG EN
-
Static IP address - How to set up static IP address VoiceBlueMax
-
Static IP address in 2N IP Intercoms
-
Static IP address on MikroTik router
-
Student Monitoring System - VoiceBlue Next
-
Summer or Winter time does not change automatically
-
Tamper switch - Location (installation) and configuration
-
Tarrifs - Tariffs settings complete description
-
Technical issue - How to report an issue on VoiceBlue?
-
Telephone number VoiceBlue Next - Can I replace SIM card telephone number with my own number?
-
Test call for VoiceBlue Next- How to make a test call from softphone?
-
Test call - How to make a test call from Softphone to 2N VoiceBlue MAX
-
Test call - How to make test calls?
-
Test server - 2N SmartCom server configuration
-
Test server with web interface - 2N SmartCom server configuration
-
The example of OSDP module connecting and using on 2N Intercom
-
The IMSI or SCID file cannot be imported in 2N SIM Star
-
There is none or only oneway audio on your VoIP calls
-
The SIM cards do not assign or not log in GSMs view on 2N SIM Star
-
The simulation of incoming calls with 2N SIM Star Server does not work
-
This is a walkthrough how to interconnect 2N SIP SPEAKER HORN with MY2N to let a user announce from a cell phone to the 2N SIP SPEAKER HORN
-
Time Profiles
-
Time profiles - managing time restricted access for 2N Fortis
-
Time settings - How to configure in 2N Access Commander
-
Trace - How to get a trace from VoiceBlue Lite?
-
Trace - How to get internal trace from 2N BRI Lite / 2N BRI Enterprise?
-
Trace - How to get internal trace from 2N StarGate / 2N BlueTower?
-
Trace - How to get internal trace from 2N VoiceBlue MAX?
-
Trace - How to get internal trace from 2N VoiceBlue Next?
-
Trace - trying to trace ("AT!Rx", "AT!Lx" commands) 2N StarGate or 2N BlueTower responds "BUSY".
-
Troubleshooting basics – Configuration backup, network trace, syslog and ping tool on 2N IP Intercoms
-
Troubleshooting - How to troubleshoot an issue on 2N Lift products (ST)
-
Troubleshooting of issue with 2N Access Commander
-
Two-factor (2FA) authentication in 2N Access Commander
-
unable-to-establish-connection-between-2n-voiceblue-next-and-2n-xapi-server
-
Unit share - Is it possible to share one Machine room unit for more shafts?
-
Unlock buttons - Configuration in 2N Answering Units
-
Unsatisfied Audio quality in 2N Analogue Intercoms
-
Update of the system
-
upgrade-from-firmware-119-and-lower-to-firmware-122-and-higher
-
Upgrading-firmware-on-2N-LiftIP
-
Upgrading splitter from 1.x.x to 2x.x on Lift 8
-
Upload a video to display on 2N IP Intercom
-
User Defined Functions (UDF) - what is it and how to configure it in 2N SmartCOM?
-
user-message-how-to-record-and-upload-user-message-to-2n-lift1-communicator
-
User Reservation - How to set it in 2N NetStar
-
Using configuration templates in 2N Elevator Center
-
Using Group Authentication / Access key in 2N Indoor Touch 2.0
-
Vega LPR integration with 2N IP Intercoms and Access Units
-
Video - 2N Access Commander - Basic setup guide
-
Video - 2N Indoor Touch 2.0 - Setting up calls between 2N Indoor Touch 2.0 and 2N IP intercoms
-
Video - 2N Indoor Touch - doorbell button installation and configuration
-
Video - 2N IP Audio system - Basic setting
-
Video - 2N IP Audio system - MicroSD card usage
-
Video - 2N IP Intercom - How to switch between internal and external cameras using DTMF
-
Video - 2N IP intercom - IP address, how to find it out and switch between DHCP and static modes
-
Video - 2N IP intercoms - Calling multiple destinations in sequence and in parallel by pressing one button
-
Video - 2N IP Verso - Fingerprint module installation and configuration
-
Video - 2N IP Verso - Flush frame installation - brickwall
-
Video - 2N IP Verso - Flush frame installation - plasterboard
-
Video - 2N Net Mic - Introduction & setup
-
Video - 2N OS devices - Factory Reset procedure
-
Video - 2N SIP Mic - Basic setting
-
Video - 2N SIP Speaker Horn - Basic setting
-
Video - 2N® IP Verso - Touch display module options
-
Video - Configuration of 2N IP intercom with 2N IP Eye
-
Video issue - 2N IP Intercom does not send video during a call
-
Video - My2N & 2N Indoor Touch - how to configure local or cloud calling
-
Video - My2N platform - registration and setup of cloud calling
-
Video – 2N Indoor Compact - flush installation guide
-
Video – 2N Indoor Talk - flush installation guide
-
Video – 2N IP Base - surface installation guide
-
Virtual Card ID
-
Virtualization (VT-x/AMD-V) enabling on your computer
-
Virtual Numbers and Telephone Mode
-
Virtual Ring Tone - How to upload Virtual Ring Tone Message without configuration tool?
-
Virtual Sound Card - Login was unsuccessful
-
Visitors in My2N – How to create visitors
-
Visitors management - Manage visits in 2N Access Commander
-
Visitors management & Simplified user interface
-
Vivotek video server - How to connect with 2N Analog Intercom
-
VLC media player - watch and record video from 2N IP Intercom
-
VoiceMail Classic - How to set it in 2N NetStar
-
Voicemail - How to configure
-
VoiceMail to Email - How to set it in 2N NetStar
-
Voice recognition - How to set Voice recognition (number portability detection)?
-
VoIP ATA converter - How to connect 2N Analog Intercom via Well ATA-171P converter to VoIP server
-
VoIP card - I have a new VoIP card. What should I do to make it work?
-
voip-card-led-is-solid-red
-
voip-gateway-how-to-set-2n-netstar-as-a-voip-gateway
-
VoIP trunk - How to setup with IP phone
-
volume-control-how-to-increase-or-decrease-volume-of-2n-lift8-car-unit
-
VPN connection on LiftGate
-
Web interface access - 2N IP intercoms
-
Web interface access when running old firmware on Indoor View
-
Web interface of 2N Indoor Touch is slow
-
Web scheduler - How to work with 2N IP Audio Web Scheduler
-
What are the methods of sending and receiving SMS messages using 2N BRI Lite and 2N BRI Enterprise?
-
What is Callback?
-
What is the maximum number of VoIP calls via UMTS module?
-
What LAN/Wi-Fi infrastructure do I need for 2N Indoor Touch installation?
-
What to check if the FW update on a 2N Indoor Touch is failing?
-
What to do if a 3rd party app is displayed in portrait mode on 2N Indoor Touch?
-
What to do if the intercom does not dial Mobile Video
-
What to do when OfficeRoute stopped working after a month.
-
Which devices can be connected - 2N Access Commander
-
Which TCP-IP ports do I need to open for the connection to the Omega PBX?
-
Wiegand interface Configuration in 2N Intercom
-
Wiegand interface - Function overview
-
Wireless M-bus - 2N SmartCom PRO decryption configuration
-
Wireshark trace - How to make a trace of a call?
-
Wireshark trace - How to make a trace of call
-
Working with HTTP API on 2N Indoor Touch
-
Yealink IP Phone SIP-T26P vs. 2N SIP Audio Converter - Sending and receiving multicast
-
Your account does not contain any assigned devices - message in My2N application