The steps in this article require using the web interface of a 2N device. Please follow this manual in case this is your first time using the web interface.
You can set the 2N answering units to unlock up to multiple locks either during a call or without a call.
2N IP Intercom configuration
First, you need to set activation codes for switches in the intercom:
-
Go to the "Hardware" (1) and "Switches" (2) section in the web interface
-
Set different codes for each switch (3)
-
Save the configuration (4)
2N Indoor Talk configuration
After setting the Activation codes in the IP intercom, go to the web interface of the 2N Indoor Talk:
-
Go to the "Directory" (1), "Devices" (2), select the Intercom unit
-
Scroll down to the "Unlock Button Function" (3) and fill in the switch activation codes (3)
- Save the configuration (4)
- After that everything is set correctly, and you can open the first lock/switch on the 2N Indoor Talk by short-pressing the Lock symbol and by long-pressing the lock symbol you open the second lock
2N Indoor Compact configuration
After setting the Activation codes in the IP intercom, go to the web interface of the 2N Indoor Compact.
- Go to the "Directory" (1), "Devices" (2), select the Intercom unit
-
Scroll down to the "Unlock Button Function" (3) and fill in the switch activation codes (3)
-
Save the configuration (4)
- After that everything is set correctly, and you can open desired lock/switch on the 2N Indoor Compact by clicking on the Lock symbol and choosing the lock
2N Indoor View configuration
After setting the Activation codes in the IP intercom, go to the web interface of the 2N Indoor View
- Go to the "Directory" (1), "Devices" (2), select the Intercom unit
-
Scroll down to the "Unlock Button Function" (3) and fill in the switch activation codes (3)
-
Save the configuration (4)
- After that everything is set correctly, and you can open desired lock/switch on the 2N Indoor View by clicking on the Lock symbol and choosing the lock
