Battery failure is signalized by rotation of the signal strength indicator as shown below:
This might happen if your batteries have more then 2 years, or that there is some kind of battery problem.
To check batteries and solve battery life issue:
SMS solution (Only for EasyGates PRO with firmware 18.x.x)
-
Check batteries with SMS EG INF 12345, you will receive SMS where you will see this information: EXP:0 Time to battery change (days): Lift Functions
-
Put new batteries into the gateway 4x AA NIMH.
-
Send SMS with counter reset, parameter 60, confirmation with password: EG CNF 12345 60 = 12345.
|
Note When the batteries expire, the line voltage does not turn off, as with other power failures. SMS sent in case of power / battery error has the form: Power: On Battery: Ready Expire in: 0 |
Analogue phone connected to the FXS port solution:
-
Try to change batteries.
-
Reset with the analogue phone connected to the FXS port by dialing 12345*60*12345* the counter for battery expiration.
|
Warning
|