2N Access Unit M
Slim access control reader
2N Access Unit M RFID Multifrequency
Order number: 02910-001
The unit reads cards at frequencies of 125 kHz and 13.56 MHz. This comes in handy if you have several companies in one building, each of them using different cards and they share certain areas. It also includes a controller with full decision intelligence. All you need to install and power the unit is a single UTP cable. The customer saves money on readers and you save time on installation and configuration.
Technical specifications
/
-
Power Supply
- Type:
- PoE and/or 12 V/1 A DC
- PoE:
- 802.3af (Class 0–12.95 W)
-
Interfaces
- LAN:
- 10/100 BASE-TX Auto-MDIX, RJ-45 male (29m pigtail)
- Recommended Cabling:
- Cat-5e or better
- Active Switch Output:
- 8 to 12V, DC, max 600mA
- Passive Switch:
- NO/NC relay, 30V, 1A, AC, DC
- Inputs:
- 2N, OFF = open or Uin> 1.5V / ON = short-circuit or Uin< 1.5V
- Tamper Switch:
- inbuilt
- Audio:
- buzzer, 1W, 8Ω
- Supported Protocols:
- DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
-
Bluetooth Reader
- Version:
- compatible with Bluetooth 5.0 LE
- Range:
- adjustable short - typically up to 3m, long - typically up to 10m, distances should serve only as an approximate guide and may vary depending on the phone model and installation environment
- Security:
- 128encryption
- RX Sensitivity:
- 94.8dB
- Mode:
- card, touch, tap in app
-
RFID Card Reader
- Supported Frequencies:
- 125kHz, 13.56MHz
- 125 KHz:
- EM4xxx
- 13.56 MHz:
- reads UID (CSN) ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (My2N app), Secured MIFARE DESFire EV2/EV3 cards using 2N PICard technology
-
Touch Keypad
- Technology:
- capacitive touch technology, high touch layer sensitivity (0.1pF)
- Reliability:
- regular automatic calibration (SmartSence Auto-tunning), does not detect false touches on wet surface
- Signalling:
- configurable backlight intensity, indication using multicoloured LEDs, acoustic response for every keypad touch
-
Mechanical Properties
- Frame:
- tempered glass with rugged plastic
- Operating temperature:
- -40 to 60°C
- Storage temperature:
- -40 to 60°C
- Operating relative humidity:
- 10%-95% (non-condensing)
- Weight:
- 500g
- Cover Rating:
- IK7, IP54
-
Dimensions
- 2N Access Unit M:
- 1.97 × 5.24 × 1.06 inch
- Flush installation box:
- 1.57 × 5.00 × 2.68 inch
- Surface mount box:
- 1.06 × 5.28 × 2.05 inch
-
General
- Mobile Application Support:
- Android 12, iOS 18.0 (iPhone, iPad), visionOS 2.0 (Apple Vision), watchOS 11.2 (Apple Watch) - and higher
Suitable for these products
Download
A&E Specifications
Datasheet
Declaration of Conformity
Security
Driver