2N IP Audio Kit
OEM IP intercom that adds voice communication to your device
2N IP Audio Kit
Order number: 01526-001
2N IP Audio Kit is an OEM intercom intended for incorporation into a variety of devices. It is designed to add value to both audio communication and remote surveillance and control. With it, users get both live support and the ability to ask for advice at the touch of a button.
Technical specifications
/
-
Audio Stream
- Volume Control:
- adjustable, with auto adaptive mode
- Full Duplex:
- Yes (AEC)
-
Power Supply
- From An External Source:
- 12V, max. 2A
- PoE:
- 802.3af (Class 0–12.95 W)
-
LAN Interface
- LAN Interfaces Available:
- 1
- PoE:
- 802.3af
- Parameters:
- 10/100BASE-TX with Auto-MDIX, RJ-45
- Recommended Wiring:
- Cat-5e or better
- Supported Protocols:
- SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog
-
Audio Interface
- Microphone Input:
- Basic electric microphone
- Amplifier Output:
- Amplifier class D, output MONO, THD < 1% Max. 10W/4Ω Max. 5W/8Ω Max. 2.5W/16Ω
- Line Output:
- 600Ω
-
Buttons/Keypad Interface
- Number Of Buttons:
- Up to 16 independent buttons in a 4 x 4 matrix
- Matrix Outputs:
- 4 (ROW1-4 connectors), 01V, 32V, max. 8mA
- Matrix Inputs:
- 4 (COL1-4 connectors), Uin< 115 (L), 215V, 5V
-
LED Indicator Outputs
- Number Of Outputs:
- 3 LED1+-, LED2+- and LED3+- connectors
- Output Current:
- Typically 20mA
- Output Voltage:
- 12V
-
Digital Outputs
- Number Of Outputs:
- 2 (OUT1+- and OUT2+- connectors)
- Type Of Outputs:
- Power output with short circuit protection
- Active Switch Output:
- 7 to 11V, max 400mA
- Output Voltage:
- 12V (note. 1)
-
Interfaces
- Active Switch Output:
- PoE: 10V - adapter: source voltage minus 2V
-
Logical Inputs
- Number Of Inputs:
- 2 (IN1+- and IN2+- connectors)
- Input Type:
- Galvanically isolated inputs (optocouplers)
- Characteristics:
- Uin < 1,1V (L), Uin > 3V (H), max. Uin = 32V
-
Relay Output
- Number Of Outputs:
- 1 NC, NO, COM connectors
- Limiting Parameters:
- (DC) Max. 30VDC/1A, (AC) Max. 125VAC/0.3A
-
Mechanical Properties
- Operating temperature:
- -40 to 60°C
- Storage temperature:
- -40 to 60°C
- Operating relative humidity:
- 10%-95% (non-condensing)
- Weight:
- 280g
- Cover Rating:
- IP20
- Dimensions (W x H x D):
- 142 x 98 x 34mm
- Mounting:
- on wall, or DIN rail
- Notes:
- Note 1: If the device is supplied connected to a DC voltage source and the power supply voltage is below 12V, then the output voltage is limited to the value of the supply voltage.
-
Other
- Signalling protocol:
- SIP 2.0 (UDP)
Suitable for these products
Download
CAD and BIM
Catalogue
Declaration of Conformity
Diagram
Photos
Other
Software
Security Update Support