2N IP Force 2.0 - RFID 125kHz, Seos® Compatible 13.56MHz & Wiegand

Order number: 03356-001

Internal RFID card reader for installation in 2N IP Force 2.0 intercoms. Allows the use of both 125 kHz and 13.56 MHz frequency cards, including HID® encrypted access credentials.
Two additional relays, two logical inputs, and a Wiegand interface are available. 
It is compatible with the 2N IP Force 2.0 two-button and pictogram models (9151301CRP, 9151302CR). It also includes a tamper switch to signal when the front panel is opened.
 

Technical specifications

/
  • Includes:
    RFID reader, tamper switch, active output, relay, two inputs, Wiegand module
    Wiegand interface:
    Off/Input/Output (as programmed)
    Active switch output:
    9.8 to 13.8 V DC according to power supply (PoE+: 11,6 V; adapter: power supply voltage minus 0,4 V), up to 400 mA
    Inputs:
    2 inputs: active (requires external voltage) or passive (requires external contact only)
    Signaling output:
    Internal red LED under the intercom front panel
    Power supply:
    12 V DC ± 15% / 350 mA for external RFID card reader
  • 125 kHZ:
    EM4x02, NXP HiTag2, HID® Prox
    13.56 MHz - ISO14443A:
    MIFARE® Classic®, MIFARE Plus®, MIFARE Mini, MIFARE Ultralight®, MIFARE DESFire®
    HID® iClass:
    HID iClass® CSN, Picopass
    FeliCa:
    Standard, Lite
    HID:
    HID Seos®, HID iClass SE™, iClass SR, HID MIFARE DESFire with SIO, HID MIFARE Classic with SIO, HID DESFire EV3 SE
    2N PICard:
    supports MIFARE DESFire EV2 & EV3 cards
    NFC/HCE:
    smartphone with the My2N App
  • Working temperature:
    −30 °C – +55°C
    Storing temperature:
    −40 °C – +70°C
    Working relative humidity:
    10 % – 95 % (non-condensing)
  • 5-years warranty:
    See Warranty and repairs page for more information

Suitable for these products