The steps in this article require using the web interface of a 2N device. Please follow this manual in case this is your first time using the web interface.
If 2N IP Intercom equipped with a display is added in 2N Access Commander, the contacts on the given display are set directly in 2N Access Commander for the specified device.
Requirements
- Intercom: IP Vario with display, IP Verso with display module,IP Verso 2.0 with display module or IP Style.
It is always recommended to use the current version of 2N Access Commander to ensure full functionality and support for the latest firmware on the device.
Contacts from a group other than the one that has access to the zone where the device with the display is located are not synchronized with the device.
In this case, it is necessary to create that contact in duplicate, adding it to the group with access to the zone where the device is located, and fill in only the phone number (not the access data).
Setting the display
-
In the web interface of 2N Access Commander, go to the Devices section and select the device
-
Next: Administration > Display Configuration > Configure (see image below with the red box below).
-
Here we can add individual items to the display depending on which button we will use here. In order for the changes to take effect on the device's display, it is necessary to click on the Save button (see the red box on the picture below).
-
There are elements available which allows you to add various object to display:
Create a folder (by clicking on the name of the folder you will get to it so that you can add users or a call group or another sub-folder here,
again using the buttons on the screen top right).
Create a call group (by clicking on the name of the call group you will get to it so that you can add users here - again with the given button top right).
Users within such a call group will then be dialed in parallel (at once).
Add a user who is already created in the Access Commander.
Add a group already created within Access Commander. Users from the given group will be displayed individually.
There also elements which allows to do certain operations with already placed objects:
Click on this button to edit the folder name, resp. calling group.
By checking these pin icons on the right, you can give priority for the contacts, moving them to top in display's contacts order.
Click on this button to remove object such as the contact from the display configuration.
-
Then you can see the display configuration directly in the device's detail - see the picture below.
-
In case of the IP Vario, the contacts of the display buttons are also configured in Access Commander - see the tab in the red box in the device's detail in the picture below.
(just one contact can be selected for buttons 1 - 4, again using the pin button; by the delete button we can remove the contact then)