Firmware compatibility across 2N Access Commander versions

Question

Accepted Answer

The nerve centre of our access control solution is 2N Access Commander. Use it for managing access to the building and monitoring the status of 2N access devices in real time. Its intuitive user interface lets you set up the system quickly and delegate everyday activities directly to the customer. We always recommend to keep the firmware and software version up-to-date. However if needed, in table below, you can find which firmware installed on our devices is supported and can be connected to which version of 2N Access Commander. 2N OS devices includes 2N IP Intercoms, 2N Access units and some of 2N answering units (2N Indoor Talk, 2N Indoor View, 2N Indoor Compact, etc...).Full list of supported devices is available in manual.    2N Access Commander version  Supported firmware of 2N OS based devices  Supported firmware of 2N Indoor Touch 2.0  3.5.1 / 3.5.2   2.45, 2.46, 2.47, 2.48, 2.49, 2.50, 3.0, 3.1   4.3.x or newer  3.5   2.45, 2.46, 2.47, 2.48, 2.49, 2.50, 3.0   4.3.x or newer  3.4.2   2.43, 2.44, 2.45, 2.46, 2.47, 2.48, 2.49   4.3.x or newer  3.4.1   2.43, 2.44, 2.45, 2.46, 2.47, 2.48, 2.49   4.3.x or newer  3.4   2.43, 2.44, 2.45, 2.46, 2.47, 2.48   4.3.x or newer  3.3.1   2.42, 2.43, 2.44, 2.45, 2.46, 2.47   4.3.x or newer  3.3   2.40, 2.41, 2.42, 2.43, 2.44, 2.45, 2.46    4.3.x or newer  3.2.2   2.40, 2.41, 2.42, 2.43 ,2.44, 2.45    4.3.x or newer  3.2.0  2.40, 2.41, 2.42, 2.43 ,2.44, 2.45   4.3.x or newer  3.1.1  2.39, 2.40, 2.41, 2.42.2, 2.43, 2.44  4.3.x or newer  3.0.1  2.38, 2.39, 2.40, 2.41, 2.42.2, 2.43  4.3.x or newer  2.7.1  2.36, 2.37, 2.38, 2.39 ,2.40, 2.41, 2.42.1  4.3.x or newer  2.7.0  2.36, 2.37, 2.38, 2.39, 2.40, 2.41  4.3.x or newer  2.6.1  2.35, 2.36, 2.37, 2.38, 2.39, 2.40  4.3.x or newer  2.5.1  2.33, 2.34, 2.35, 2.36, 2.37, 2.38  4.3.x or newer  2.5.0  2.33, 2.34, 2.35, 2.36 ,2.37  4.3.x or newer  2.4.1  2.33, 2.34, 2.35, 2.36  4.3.x or newer  2.3.1  2.33, 2.34, 2.35  4.3.x or newer  2.2.0  2.32, 2.33, 2.34  4.3.x or newer  2.1.0  2.31, 2.32, 2.33  4.3.x or newer  2.0.2  2.30, 2.31, 2.32  4.3.x or newer  1.17  2.29, 2.30, 2.31  ---

Firmware compatibility across 2N Access Commander versions

このページは役に立ちましたか?

何か提案はありますか?

もっと助けが必要ですか?

2N Access Commander version	Supported firmware of 2N OS based devices	Supported firmware of 2N Indoor Touch 2.0
3.5.1 / 3.5.2	2.45, 2.46, 2.47, 2.48, 2.49, 2.50, 3.0, 3.1	4.3.x or newer
3.5	2.45, 2.46, 2.47, 2.48, 2.49, 2.50, 3.0	4.3.x or newer
3.4.2	2.43, 2.44, 2.45, 2.46, 2.47, 2.48, 2.49	4.3.x or newer
3.4.1	2.43, 2.44, 2.45, 2.46, 2.47, 2.48, 2.49	4.3.x or newer
3.4	2.43, 2.44, 2.45, 2.46, 2.47, 2.48	4.3.x or newer
3.3.1	2.42, 2.43, 2.44, 2.45, 2.46, 2.47	4.3.x or newer
3.3	2.40, 2.41, 2.42, 2.43, 2.44, 2.45, 2.46	4.3.x or newer
3.2.2	2.40, 2.41, 2.42, 2.43 ,2.44, 2.45	4.3.x or newer
3.2.0	2.40, 2.41, 2.42, 2.43 ,2.44, 2.45	4.3.x or newer
3.1.1	2.39, 2.40, 2.41, 2.42.2, 2.43, 2.44	4.3.x or newer
3.0.1	2.38, 2.39, 2.40, 2.41, 2.42.2, 2.43	4.3.x or newer
2.7.1	2.36, 2.37, 2.38, 2.39 ,2.40, 2.41, 2.42.1	4.3.x or newer
2.7.0	2.36, 2.37, 2.38, 2.39, 2.40, 2.41	4.3.x or newer
2.6.1	2.35, 2.36, 2.37, 2.38, 2.39, 2.40	4.3.x or newer
2.5.1	2.33, 2.34, 2.35, 2.36, 2.37, 2.38	4.3.x or newer
2.5.0	2.33, 2.34, 2.35, 2.36 ,2.37	4.3.x or newer
2.4.1	2.33, 2.34, 2.35, 2.36	4.3.x or newer
2.3.1	2.33, 2.34, 2.35	4.3.x or newer
2.2.0	2.32, 2.33, 2.34	4.3.x or newer
2.1.0	2.31, 2.32, 2.33	4.3.x or newer
2.0.2	2.30, 2.31, 2.32	4.3.x or newer
1.17	2.29, 2.30, 2.31	---