Integration
MS Teams Tab
Microsoft Teams integration provides calls between a 2N device and the Microsoft Teams account. You have to configure the Microsoft Teams SIP gateway to interconnect the device with Microsoft Teams. Refer to the FAQ or the MS Teams documentation for details. Once you enter the configuration server address into the 2N device configuration, the integration (onboarding) is accomplished. Upon onboarding, you can log in to the Microsoft Teams account in the web configuration interface.
Microsoft Teams Enabled – enable integration with MS Teams
Service
State – display the current status of the onboarding and login processes.
“Disabled” – function disabled.
“Onboarding” – the device is getting/has got the shared configuration for onboarding or individual configuration for onboarding (before login).
“Onboarding failed” – the device was unable to get the shared/individual onboarding configuration or to register with the onboarding SIP server.
“Offline” – no sever response.
“Online” – successful device registration with the end SIP server.
“Registration Failed” – the device failed to register with the end SIP server.
“License Required” – the device is not equipped with the license required for this function.
Phone Number – display the phone number (ID) that the device obtained from the MS Teams server.
Test Call – display a dialog box enabling you to make a test call to a selected phone number.
Provisioning Server Settings
Address Retrieval Mode – select whether the MS Teams onboarding server address shall be entered manually or a value retrieved automatically from the DHCP server using Option 66 or 150 shall be used.
Server Address – enter the MS Teams onboarding server manually.
DHCP (Option 66/150) address – check the server address retrieved via the DHCP Option 66 or 150.
Configuration Update Schedule
At Boot Time – enable check and, if possible, update upon every device start.
Update period – set the update period. hourly, daily, weekly and monthly.
Update At – set the update time in the HH:MM format for periodical updating The parameter is not applied if the update interval is shorter than 1 day. Time is set in UTC. Check the Next Update Time value to see the actual update time scheduled.
Discovery Service Tab
Settings
Integration Server Address – set the URL of the Discovery Service. The device sends HTTP requests with basic data at startup, whenever the IP address changes and periodically (if configured). If the field is empty, no requests are sent.
Note
The JSON request sent contains the following information about the device: MacAddress, Dhcp, IpAddress, NetMask, Gateway, SwVersion, SerialNumber, Variant, VariantId, Description, ProductName, CameraResolution (max.), HttpPort, HttpsPort.
Verify Server Certificate – enable validation of the integration server certificates to ensure that the Discovery requests are sent to a trusted server.
Client Certificate – select which of the uploaded certificates will be used for encrypted communication with the integration server.
Send Discovery Requests Periodically – enable sending the Discovery HTTP requests.
Discovery Period – set the period of sending the HTTP request to the configured URL in seconds.
Integration Status – display the integration status based on the response from the server.
Details – display the details contained in the response from the server.