Precisa de ajuda? Pergunte ao IA

Selecione sua região e idioma

EMEA

AMER

APAC

Bluetooth Access Settings

Make sure that the My2N app is installed in your mobile phone to make successful authentication via Bluetooth.

Get it on Google Play Icon
Download on the App Store icon

Caution

The pairing code setting must currently be done in the old configuration interface.

Pairing Code Creation Using Device

  1. Go to Directory and open the detail of the user for whom you want to create the pairing code.

  2. Click Go to the old interface in the web configuration interface header.

    The user detail will open in the old configuration interface format.

  3. Click 2nos-old-icon-bluetooth.png in the WaveKey block.

    A pairing code will be generated in the open dialog box to be entered into the My2N application on your device.

  4. Open the My2N app and enter the pairing PIN.

    Note

    If you already have an app connected to another device, you can enter the pairing PIN via the add icon at the top of the screen.

  5. Follow the instructions on your mobile phone – bring the phone close to the device in the pairing mode and click Start pairing.

Warning

Use the Mobile Key application for pairing of mobile phones with older OSs (Android 9 / iOS 17 and lower).

Mobile Key Pairing

  1. Download the Mobile Key application to your mobile phone. The app is available at App Store and Google Play.

  2. Open the application and enable Bluetooth access for Mobile Key.

  3. According to the mobile key type, draw your mobile phone near the USB reader or the pairing device.

  4. Click the device offered for pairing in Mobile Key.

  5. The application prompts you to enter the PIN code. Enter the pairing code and confirm.

Bluetooth Authentication Methods

Different Bluetooth authentication methods can be set in the web configuration interface.

  • Directly in Mobile App – the user selects the door to be unlocked directly in the My2N mobile app. If within the range of a 2N device, the user mobile device is will connect with the device and, if the access rules are met, the door will unlock.

  • Bringing Mobile Phone Close to Device and Touching Device – a user with a mobile device and Bluetooth enabled approaches the 2N device and touches the Bluetooth authentication location on the 2N device, which is usually marked with a Bluetooth icon the Bluetooth symbol, Bluetooth Icon in 2N IP Style. Once the connection is established and access rights are verified, the door is unlocked.

  • Motion Detection – the camera-equipped 2N devices detect movement in the surroundings, automatically activating Bluetooth. If a 2N device detects a user mobile device with valid access within its range, the door will unlock.

Accepted Bluetooth Authentication Method Settings

  1. Go to Access > Modules.

  2. Select the possible methods in Start Authentication on the Bluetooth modules tab.

  3. If you selected “Motion Detection”, select the profile by which motion is to be detected.

Note

The motion detection profiles are set in Customization > Camera > Internal Camera.

In this section:

Esta página foi útil?