Basic Access to Interface
This subsection describes putting in operation and basic operation of Access Commander. The installation is described in Subs. Installation.
The Access Commander interface is accessible through a web browser. The IP address of the web interface can be looked up using 2N Network Scanner or Axis IP Utility. The web interface can also be accessed directly at accesscommander.local. This functionality is enabled by default.
Note
If multiple Access Commander instances are running in the network, the system automatically assigns unique names: accesscommander.local, accesscommander-2.local, accesscommander-3.local and other instances according to the count of servers in the network.
With the Access Commander Box distribution, connect to the web interface from another LAN computer. The Access Commander Box operating system ensures the Access Commander operation and basic Linux settings, but does not allow the web browser to be started.
Note
With the Access Commander Box distribution, connect to the web interface from another LAN computer. The Access Commander Box operating system ensures the Access Commander operation and basic Linux settings, but does not allow the web browser to be started.
The default login data are:
Username: Admin
Password: 2n
It is necessary to change the password immediately upon the first login.
Note
Select Do Not Log Out if you want to avoid login data re-entering during the next login. The login is valid for up to 7 days, after which you have to log in again.
Two-Factor Authentication may be required for login.