Internal secured RFID Card Reader 13.56 MHz, Wiegand
The 13.56 MHz Internal secured RFID Card Reader (Part No. 9151031S/01730-001) is used for reading RFID card IDs in the 13.56 MHz band, NFC supported.
Specification
Card Reader
Operating frequency: 13.56 MHz
Minimum reading distance: 30 mm above the 2N IP Force surface
Passive output
Max. 30 V / 2A AC / DC
Switched output
9 to 12 V DC according to power supply (PoE: 9 V; adapter: source voltage minus 1 V), up to 600 mA
Logical inputs
Active mode – requires external voltage (JP2 jumper OFF)
UIN-ON = min. +2.5 V
UIN-OFF = max. +1.5 V
UIN max. = +48 V
IIN (UIN +48 V) = max. 1 mA
Passive mode – requires external contact only (JP2 jumper ON)
UIN1 = approx. 8.3 V
UIN2 = approx. 8.3 V
ILOOP = approx. 0.5 mA
Signaling output
Internal red LED under the intercom front panel
Power Supply
For external RFID card reader
9 to 12 V / 350 mA depending on power supply
WIEGAND interface
Off/Input/Output (as programmed)
Module Settings
Refer to the Configuration Manual for details of Wiegand, output and reader settings. Refer to the Automation manual for input, red LED and tamper switch settings and use.