Suporte ao produto 2N IP Verso
Um intercomunicador IP modular versátil em um acabamento luxuoso
Aplicativos e software
| Nome do arquivo | Categoria | Tipo | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Software 3.6.1 - 2N Access Commander (VirtualBox, VMware) | Software e firmware | Programas | |||||||
2N Access Commander version 3.6.1 (May 2026)2N Access Commander version 3.6 introduces a faster way to configure devices through device templates, a centralised call log for intercoms, a dedicated Company Admin role for managing organisation-level settings, and several quality-of-life improvements throughout the system. Bugs fixed in 3.6.1:Addresses a critical bug that a ects a small number of Access Commander Box installations and My2N app pairing. New Features:Device TemplatesAdmins can now save and edit the configuration file of any 2N OS–based device and apply it to other devices individually or in bulk.
Important:
Call logsCall logs provide administrators with a single, unified view of incoming and outgoing calls from all intercoms and elevator communication devices.
Please note: If both the caller and receiver are managed by Access Commander, the system Company admin roleThe new Company Admin role gives designated users control over company-specific settings that previously required full administrator rights. This role can be combined with others such as User Manager or Visitor Manager, depending on requirements. Company Admin rights include:
Other improvements:Pairing with the My2N mobile app is now faster and more secure. Users can pair the app via a QR code displayed in Access Commander or from a link or QR code sent by email. (Supported on devices running FW 2.50/3.0 and higher).
Required Device Firmware Versions for Full Feature Support
Note - some older 2N devices cannot support versions higher than 2.50. Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
|
|||||||||
| Software 3.6.1 - 2N Access Commander (Hyper-V) | Software e firmware | Programas | |||||||
2N Access Commander version 3.6.1 (May 2026)2N Access Commander version 3.6 introduces a faster way to configure devices through device templates, a centralised call log for intercoms, a dedicated Company Admin role for managing organisation-level settings, and several quality-of-life improvements throughout the system. Bugs fixed in 3.6.1:Addresses a critical bug that a ects a small number of Access Commander Box installations and My2N app pairing. New Features:Device TemplatesAdmins can now save and edit the configuration file of any 2N OS–based device and apply it to other devices individually or in bulk.
Important:
Call logsCall logs provide administrators with a single, unified view of incoming and outgoing calls from all intercoms and elevator communication devices.
Please note: If both the caller and receiver are managed by Access Commander, the system Company admin roleThe new Company Admin role gives designated users control over company-specific settings that previously required full administrator rights. This role can be combined with others such as User Manager or Visitor Manager, depending on requirements. Company Admin rights include:
Other improvements:Pairing with the My2N mobile app is now faster and more secure. Users can pair the app via a QR code displayed in Access Commander or from a link or QR code sent by email. (Supported on devices running FW 2.50/3.0 and higher).
Required Device Firmware Versions for Full Feature Support
Note - some older 2N devices cannot support versions higher than 2.50. Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
|
|||||||||
| 2N USB Driver 1.9.0 | Software e firmware | Programas, Motorista | |||||||
2N USB Driver version 1.9.0 (April 2026)This driver allows:- Enrolling of RFID cards from 9137421E External RFID Reader 125kHz + 13.56MHz (USB interface), or the HID SEOS compatible version 9137424E, directly to web interface of 2N IP Intercoms, 2N Access Units and 2N Access Commander.- Enrolling of users into Bluetooth access control. Users need to have the 2N My2N app on their smartphone and Bluetooth capable 2N devices. - Enrolling of users for access control using the 9137423E USB Fingerprint reader. - Certificate valid until December 2026. Compatible cards:- Low-Frequency Cards (125 kHz)- High-Frequency Cards (13.56 MHz, ISO/IEC 14443A) - 2N PICard (MIFARE® DESFire® EV2 / EV3) - 2N Secure Cards with Fortis Lock Support (MIFARE® DESFire® EV2 / EV3) - HID® Secure Cards (HID iCLASS SE®, HID Seos®, HID MIFARE® DESFire® EV3) PC requirements- Windows 10 or newer- With Microsoft .NET Desktop Runtime 8.0 (x86) or newer (2N USB Driver installer will download required dependencies automatically if missing) Changes in the version 1.9.0:- Support for MIFARE® DESFire® cards with third-party applications installed (Cards must support anonymous application creation)- Adds support for Access Commander version 3.6 |
|||||||||
| 2N Plugin for XProtect Access integration 1.7.0.126 | Software e firmware | Integration, Programas | |||||||
2N Plugin for XProtect Access integrationVersion 1.7.0 (April 2026)Summary:Version 1.7.0 of the 2N Plugin for XProtect adds support for the 2N Force 2.0, 2N Access Unit QR and addresses some bugs.Improvements:- Support for the 2N IP Force 2.0- Support for the 2N Access Unit QR - Resolves an issue where device icons were not correctly representing door state - Fixes an issue where lockdown and door hold state was not working correctly for 2N IP One Requirements:- When second factor authentication (2FA) is enforced in Access Commander API bearer tokens must be used.- Milestone XProtect 2014 or newer (.net framework 4.5.1) - 2N Access Commander 3.6.0 or newer recommended. - Intercom/Access unit firmware 2.50.x/3.1.x Note: Some older 2N devices cannot support versions higher than 2.50.x Dependencies:- An enhanced integration license should be present in 2N IP Intercoms for correct functioning of this plugin. This license is not required for 2N Access Units. |
|||||||||
| Software 3.5.2 - 2N Access Commander (VirtualBox, VMware) | Software e firmware | Programas | |||||||
2N Access Commander version 3.5.2 (February 2026)2N Access Commander version 3.5 introduces enhanced support for 2N Fortis Locks, a new card search function, company specific time profiles, support for emergency elevator communicators and other improvements.
New Features in 3.5.0Enhanced support for 2N Fortis electronic locks
New search improvements
Company specific time profilesIn multi-company installations, admins can now assign new time profiles to companies. An access manager will only see system-wide time profiles or time profiles assigned to their company. The creation of a new time profile by an access manager will not be visible to other companies.2N Emergency Elevator Communicator supportAccess Commander now supports 2N OS based elevator devices (LiftIP 2.0 and Sentrio). The online state of these devices can be monitored from the device list, monitoring page and can be notified by email. As with all 2N OS devices, access to the device web configuration is also supported, with Access Commander remembering the device password.Other improvements:
Required Device Firmware Versions for Full Feature Support
Note - some older 2N devices cannot support versions higher than 2.50.x Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
API Changes
|
|||||||||
| Software 3.5.2 - 2N Access Commander (Hyper-V) | Software e firmware | Programas | |||||||
2N Access Commander version 3.5.2 (February 2026)2N Access Commander version 3.5 introduces enhanced support for 2N Fortis Locks, a new card search function, company specific time profiles, support for emergency elevator communicators and other improvements.
New Features in 3.5.0Enhanced support for 2N Fortis electronic locks
New search improvements
Company specific time profilesIn multi-company installations, admins can now assign new time profiles to companies. An access manager will only see system-wide time profiles or time profiles assigned to their company. The creation of a new time profile by an access manager will not be visible to other companies.2N Emergency Elevator Communicator supportAccess Commander now supports 2N OS based elevator devices (LiftIP 2.0 and Sentrio). The online state of these devices can be monitored from the device list, monitoring page and can be notified by email. As with all 2N OS devices, access to the device web configuration is also supported, with Access Commander remembering the device password.Other improvements:
Required Device Firmware Versions for Full Feature Support
Note - some older 2N devices cannot support versions higher than 2.50.x Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
API Changes
|
|||||||||
| Fortis Commander | Software e firmware | Programas | |||||||
|
|||||||||
| Software 3.4.2 - 2N Access Commander (VirtualBox, VMware) | Software e firmware | Programas | |||||||
2N® Access Commander version 3.4.2 (September 2025)2N® Access Commander version 3.4 introduced a range of new features, detailed below. This subsequent 3.4.2 release adds support for 2N OS firmware 2.49, delivers minor text improvements, and resolves a few small issues.This release includes security fixes and addresses concerns regarding the following user reported vulnerabilities.
It is strongly recommended that all users upgrade to version 3.4.2 to ensure the security of their installation. As with all Access Commander upgrades, this release updates external dependencies critical for security. IMPORTANT - Due to a redesign of the proxy server settings, upgrading to this version from 3.3.1 or lower will erase any existing configuration—administrators will need to re-enter the proxy details after the update. New Features & Improvements:2N Fortis electronic locksThis release supports 2N Fortis wireless electronic locks (handles and cylinders) in offline mode. Locks can be added to Access Commander and assigned to zones, similar to other access readers in the software. 2N Fortis locks adhere to the OSS Secure ID standard, where access rights are stored and encrypted on the card or fob (DESFire EV3) rather than the device itself. Due to the offline nature of these devices, active monitoring or control is not supported. In this version of Access Commander, a 2N intercom or 2N Access Unit is required for writing access rights to cards and must be part of the installation.Proxy exceptions2N Access Commander now supports more granular proxy configuration, allowing administrators to define proxy server exceptions (domains or addresses). This improvement simplifies network management in complex environments, ensuring external services can connect via network proxy while local devices can remain unaffected. This update addresses key customer requests and lays the foundation for future cloud-based functionality.Extended visitor durationUntil now visitors in Access Commander were limited to a maximum visit of 30 days. From Access Commander 3.4 we are increasing this duration to a maximum of 90 days allowing temporary access that can span months. Ideal for customers integrating Access Commander with third-party systems that need support for longer visits.Device typesWe've added a new column to the device list page called 'Types'. It's now even easier to see which device is an intercom, Access Unit, answering unit or electronic lock. The list can be filtered based on the selected type.New DevicesThis release supports the new 2N IP Force 2.0 intercom the 2N Clip 2wire-IP answering unit, and of course, 2N Fortis electronic locks.Additional NotesIMPORTANT - For security reasons, this version of Access Commander is not compatible with 2N Intercoms and 2N Access Units running firmware version 2.37 or older. Access Commander will not manage devices with these firmware versions even if compatibility mode is enabled. Please ensure all devices are running firmware version 2.38 or newer before upgrading.Required Device Firmware Versions for Full Feature Support
Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
API Changes
|
|||||||||
| Software 3.4.2 - 2N Access Commander (Hyper-V) | Software e firmware | Programas | |||||||
2N® Access Commander version 3.4.2 (September 2025)2N® Access Commander version 3.4 introduced a range of new features, detailed below. This subsequent 3.4.2 release adds support for 2N OS firmware 2.49, delivers minor text improvements, and resolves a few small issues.This release includes security fixes and addresses concerns regarding the following user reported vulnerabilities.
It is strongly recommended that all users upgrade to version 3.4.2 to ensure the security of their installation. As with all Access Commander upgrades, this release updates external dependencies critical for security. IMPORTANT - Due to a redesign of the proxy server settings, upgrading to this version from 3.3.1 or lower will erase any existing configuration—administrators will need to re-enter the proxy details after the update. New Features & Improvements:2N Fortis electronic locksThis release supports 2N Fortis wireless electronic locks (handles and cylinders) in offline mode. Locks can be added to Access Commander and assigned to zones, similar to other access readers in the software. 2N Fortis locks adhere to the OSS Secure ID standard, where access rights are stored and encrypted on the card or fob (DESFire EV3) rather than the device itself. Due to the offline nature of these devices, active monitoring or control is not supported. In this version of Access Commander, a 2N intercom or 2N Access Unit is required for writing access rights to cards and must be part of the installation.Proxy exceptions2N Access Commander now supports more granular proxy configuration, allowing administrators to define proxy server exceptions (domains or addresses). This improvement simplifies network management in complex environments, ensuring external services can connect via network proxy while local devices can remain unaffected. This update addresses key customer requests and lays the foundation for future cloud-based functionality.Extended visitor durationUntil now visitors in Access Commander were limited to a maximum visit of 30 days. From Access Commander 3.4 we are increasing this duration to a maximum of 90 days allowing temporary access that can span months. Ideal for customers integrating Access Commander with third-party systems that need support for longer visits.Device typesWe've added a new column to the device list page called 'Types'. It's now even easier to see which device is an intercom, Access Unit, answering unit or electronic lock. The list can be filtered based on the selected type.New DevicesThis release supports the new 2N IP Force 2.0 intercom the 2N Clip 2wire-IP answering unit, and of course, 2N Fortis electronic locks.Additional NotesIMPORTANT - For security reasons, this version of Access Commander is not compatible with 2N Intercoms and 2N Access Units running firmware version 2.37 or older. Access Commander will not manage devices with these firmware versions even if compatibility mode is enabled. Please ensure all devices are running firmware version 2.38 or newer before upgrading.Required Device Firmware Versions for Full Feature Support
Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
API Changes
|
|||||||||
| Software 5.2.0.0 - 2N IP Utility | Software e firmware | Programas | |||||||
Products involved: 2N IP Utility
Release date: April 22, 2025 Release type: Production Software version: 5.2.0.0 File name: 2NIPUtilitySetup.exe Supported OS: Windows 11, Windows 10 Software: Microsoft .Net 4.7.2 Framework Languages: English, French, Italian, German, Spanish, Japanese Preceding release: 5.1.8.0 Contact Information Please contact 2N Telecommunications Inc. for product information, updates and support at: https://www.2n.com Installation Run 2NIPUtilitySetup.exe (requires administrator privileges) and follow the instructions. The application will start automatically after exiting the installation. Known limitations Changes since version 5.1.8.0 - Support for 2N devices |
|||||||||
| Software 2.8.7 - 2N Call Center - Server | Software e firmware | Programas | |||||||
Release notes Lift8 and LiftIP Version: 2.8.7 – 100 Mb LAN connection Final version: 2.8.7.33.34 Date: 1.7.2024 New features and improvements Lift8 – support for LAN communication board 100 Mb added Lift8 – second DNS server setting available Service tool - configurable space between DTMF tones during configuration to allow setting when issues with DTMF transmitting occur Service tool – changed provider of map source LiftIP1 – Incoming call by default configuration, ability to switch to voice menu by DTMF 9 Bugfixes Lift8 – incorrect message about end of button stuck error when alarm activated – fixed Lift8 – error of wireless module registration fixed Lift8 LTE – MBN profile activation check after restart – improved reliability of VoLTE calls Lift8 LTE – upgrade of central unit blocked when SIM with PIN inserted and incorrect PIN set in Lift8 Lift8 LTE – change of SIP availability according to 2G/4G technology changes LIFT8 LTE – when LTE module inserted, upgrade from older versions which doesn’t support LTE module is not possible - fixed LIFT8 LTE – module restart after VoLTE activation on SIM – necessary for VoLTE activation Service tool – configuration blocked during loading to prevent data damage Service tool – visualization of line speed for LAN corrected after connecting device, no restart of lift8 needed Service tool – unsuccessful FW upgrade with LTE module thru USB Service tool – compatibility of different versions of service tool and L8-server allowed L8-Server – incorrect setting if SIP domain – used parameter from SIP server L8-Server – incorrect length of CLIP (less then minimal length 5 digits) results in server restart – fixed Version: 2.8.5 – LTE support Final version: 2.8.5.33.28 Date: 27.11.2023 New features and improvements Lift8 - France language added to voice menu Lift8 – Support for LTE module integration and communication Lift8 – SIP call using LTE module and wireless data connection implemented, direction of call defined by prefix Lift8 – VoLTE call support using LTE module Lift8 – SMS services added to support LTE module Lift8 – Data connection support for LTE module Lift8 – Firmware in LTE module upgrade support Lift8 – LED functionality changed to support new features connected with LTE module use, description of new functionality in user manual Lift8 – Compressing of log files configured, block compressed when size 10MB reached Lift8 – Reporting of LTE module FW version, both the application FW and module FW, adding to log Lift8 – Restart of LTE module when the malfunction detected, including logging of this situation with details allowing troubleshooting Service tool – SIP and VoLTE status visualization when LTE module assembled Service tool – Reset for I/O module added to set default settings L8-Server – Repeating unsuccessful registration attempt till restart of application fixed Bugfixes Lift8 - Change in checking call DTMF timing, unwanted space fixed Lift8 – Incorrect DTMF signaling during alarm call fixed, timing of signals for call end changed Lift8 – Watchdog for SIP connection on Ethernet port added, restart of SIP engine when registration failed Lift8 – Day of week for checking call functionality fixed Lift8 – Default time setting from programming tool by DTMF fixed Lift8 – Parameter ‘day of week’ (986) shifted, beginning of week now Monday Lift8 – Incorrect finishing of SIP checking call thru Ethernet connection Lift8 – Default battery expiration time changed from 3 years to 2 years, according standards Lift8 – When PIN for SIM is filled with incorrect value, the PIN is after restart repeated till SIM blocked and PUK needed, now blocking of SIM avoided and wrong PIN indicated by LED Service tool – Beep notification of I/O module, input and output divided Service tool – Popup notification of I/O module status can result in application crash, fixed Service tool – Filtering of connection status fixed Service tool – Connection attempt during device factory reset results in impossibility of later connection, fixed Communicator – error in compatibility of database resulting to impossibility to save time setting fixed Communicator – change in PJSIP licensing done because of different mode of use Communicator - License politics error fixed, real status of license displayed Control panel – Incorrect export of Operational Calls report – format error fixed Control panel – Export of alarm call identification file corrected Control panel – Incorrect way for new group creation by superuser in another group fixed Control panel – License politics error fixed, group licenses working after expiration Control panel – Communication with Lift8 during the call may result in application crash, fixed Graphic of tools – Resolution of application window setting changed All tools – After replacing from computer some empty directories resists, fixed Whole system – 2N logo changed Version: 2.8.4 Final version: 2.8.4.33.21 Date: 15.5.2023 New features and improvements Change in licensing – control of connected devices, whether the amount agrees with license, timing of trial time period improved E-mail notification of exceeding number of licenses added Bugfixes Fixed errors in German translation for service tool Version: 2.8.4 Final version: 2.8.4.33.18 Date: 19.12.2022 New features and improvements Web address changed from www.2n.cz to www.2n.com Lift8 - Voice menu for Spain added Lift8 - Voice menu for Latin America (Spain) added Service tool – Fixed position of parameter groups, independently on languages L8 server - Support of LiftIP2 on Lift8 server Communicator - Dual audio output added – different audio output can be set for ringing and for call, improved management of connected audio devices Control Panel – Increased maximal length of intercom name from 15 to 49 characters Control Panel – Specific response (Custom) to Lift8 to confirm Checking call, Alarm call and Call to Lift8 added Bugfixes Fixed translation in tool texts and hints Fixed issues in manuals and in references to manual in tools Lift8, LiftIP – Support of SIP proxy registration after change in Netstar Service tool - Wrong functionality of calendar, when month changed, day of weeks stays from last month LiftIP – Checking call timeout can result to incorrect end of call when registration during the waiting changes LiftIP – Finding in logs improved, wrong function of help fixed Service tool - Selection of connection in service tool for LiftIP selects more than one connection Service tool – Hidden keyword for parameter 1122 – keyword for RTSP connection to camera in service tool Service tool – Improved search in logs, now is case sensitive Service tool – Graphical view to configuration fixed L8 Server – MapQuest API service change supported to keep map functionality unchanged L8 Server – Setting detail of server fixed Communicator - During incoming call to Communicator, the map is not visible Communicator – Wrong position of intercom position on map, when windows size changed, improved accuracy of position Communicator – Incorrect setting of audio device for input and output Communicator – Incorrect displaying of names of audio devices – 32 characters only Communicator – Adding new Lift8 fails in specific circumstances Control Panel - List of intercoms in Control panel doesn’t show added intercom before refresh, not full view to all intercoms as admin without selected group of intercom Control Panel - Configuration of maps available to prevent issues connected with end of service MapQuest Control Panel - Fixed error in setting of test E-mail Control Panel – CPC Antenna 2N Extension support bug fixed Control Panel – Specific response to Lift8 to confirm Checking call, Alarm call and Call to Lift8 fixed Control Panel – ID extraction from CPC Antenna 2N ext. protocol fixed Control Panel – Export of alarm call has missing information about Agent, when the value is Server Control Panel – Export of call from intercom detail shows only test call Version: 2.8.3 Final version: 2.8.3.33.14 Date: 28.6.2022 New features and improvements Lift8 – Identification of lift shaft in alarm call by voice message Lift8 – Alarm button self-test added, special type of alarm button needed Lift8 – Italian voice menu added Lift8 – Polish voice menu added Lift8 - Possibility to set siren output on the machine room communicator when alarm call activated Lift8 - Information E-mail from alarm call to Control Panel (additional functionality to E-mail notification about checking call) LiftIP – Italian voice menu added All tools - GUI of Lift8 supports seven languages: CZE, ENG, ESP, GER, FRA, ITA, RU Communicator - Plan or map of the area with marked locality of lift is visible during emergency call Communicator - Possibility to set keyboard shortcuts for define actions in Communicator to allow use of keyboard emulator Communicator – Test of microphone connection added Bugfixes Installation - Missing DLL libraries when Lift8 tools installed, mostly connected with Win10 Lift8 - Time overflow error – when Lift8 runs 49,7 days, timer overflow can result into unexpected irregularities in function. Lift8 – Alarm call with CPC Antena support failed in intercom identification – first number lost Lift8 - Time synchronization by SNTP on by default – log with correct timing supported LiftIP – issue with Payload Type for DTMF LiftIP – communication issue with AVAYA – too long packets LiftIP – After change of configuration confirmed by password, wrong password reported Service tool - doesn’t correctly display all parameters depending on screen resolution Service tool – incorrect filter, only numbers applied Service tool – Device info error when older device connected because of missing hw info L8 Server - Special characters for example - !@#$% - can’t be used as part of the SIP password L8 Server - after change of IP address on connected PC registration failure occur L8 Server – Error occur when E-mail report sent to three or more address L8 Server – Empty E-mail address for notification results into application lock or sending error Communicator - Deleting of Control panel user, who is registered in Communicator results In lock of the application Communicator - crash when display resolution changes Communicator - direct call user is not correctly signed off after user delete performed Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator - crash when display resolution changes Communicator - direct call user is not correctly signed off after user delete performed. Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator – When filtering by length of call or agent used, application crashes Control panel - When Call server is set, correct visualization of all details in graphics is not guaranteed Control panel – forced save of storage setting before next step can be performed Control panel – When more intercoms on one plan placed, it is not possible to remove any of them Control Panel – Test of storge availability, if lost, warning generated Control Panel – searching of intercom by address in map failed |
|||||||||
| Software 2.8.7 - 2N Call Center - Communicator | Software e firmware | Programas | |||||||
Release notes Lift8 and LiftIP Version: 2.8.7 – 100 Mb LAN connection Final version: 2.8.7.33.34 Date: 1.7.2024 New features and improvements Lift8 – support for LAN communication board 100 Mb added Lift8 – second DNS server setting available Service tool - configurable space between DTMF tones during configuration to allow setting when issues with DTMF transmitting occur Service tool – changed provider of map source LiftIP1 – Incoming call by default configuration, ability to switch to voice menu by DTMF 9 Bugfixes Lift8 – incorrect message about end of button stuck error when alarm activated – fixed Lift8 – error of wireless module registration fixed Lift8 LTE – MBN profile activation check after restart – improved reliability of VoLTE calls Lift8 LTE – upgrade of central unit blocked when SIM with PIN inserted and incorrect PIN set in Lift8 Lift8 LTE – change of SIP availability according to 2G/4G technology changes LIFT8 LTE – when LTE module inserted, upgrade from older versions which doesn’t support LTE module is not possible - fixed LIFT8 LTE – module restart after VoLTE activation on SIM – necessary for VoLTE activation Service tool – configuration blocked during loading to prevent data damage Service tool – visualization of line speed for LAN corrected after connecting device, no restart of lift8 needed Service tool – unsuccessful FW upgrade with LTE module thru USB Service tool – compatibility of different versions of service tool and L8-server allowed L8-Server – incorrect setting if SIP domain – used parameter from SIP server L8-Server – incorrect length of CLIP (less then minimal length 5 digits) results in server restart – fixed Version: 2.8.5 – LTE support Final version: 2.8.5.33.28 Date: 27.11.2023 New features and improvements Lift8 - France language added to voice menu Lift8 – Support for LTE module integration and communication Lift8 – SIP call using LTE module and wireless data connection implemented, direction of call defined by prefix Lift8 – VoLTE call support using LTE module Lift8 – SMS services added to support LTE module Lift8 – Data connection support for LTE module Lift8 – Firmware in LTE module upgrade support Lift8 – LED functionality changed to support new features connected with LTE module use, description of new functionality in user manual Lift8 – Compressing of log files configured, block compressed when size 10MB reached Lift8 – Reporting of LTE module FW version, both the application FW and module FW, adding to log Lift8 – Restart of LTE module when the malfunction detected, including logging of this situation with details allowing troubleshooting Service tool – SIP and VoLTE status visualization when LTE module assembled Service tool – Reset for I/O module added to set default settings L8-Server – Repeating unsuccessful registration attempt till restart of application fixed Bugfixes Lift8 - Change in checking call DTMF timing, unwanted space fixed Lift8 – Incorrect DTMF signaling during alarm call fixed, timing of signals for call end changed Lift8 – Watchdog for SIP connection on Ethernet port added, restart of SIP engine when registration failed Lift8 – Day of week for checking call functionality fixed Lift8 – Default time setting from programming tool by DTMF fixed Lift8 – Parameter ‘day of week’ (986) shifted, beginning of week now Monday Lift8 – Incorrect finishing of SIP checking call thru Ethernet connection Lift8 – Default battery expiration time changed from 3 years to 2 years, according standards Lift8 – When PIN for SIM is filled with incorrect value, the PIN is after restart repeated till SIM blocked and PUK needed, now blocking of SIM avoided and wrong PIN indicated by LED Service tool – Beep notification of I/O module, input and output divided Service tool – Popup notification of I/O module status can result in application crash, fixed Service tool – Filtering of connection status fixed Service tool – Connection attempt during device factory reset results in impossibility of later connection, fixed Communicator – error in compatibility of database resulting to impossibility to save time setting fixed Communicator – change in PJSIP licensing done because of different mode of use Communicator - License politics error fixed, real status of license displayed Control panel – Incorrect export of Operational Calls report – format error fixed Control panel – Export of alarm call identification file corrected Control panel – Incorrect way for new group creation by superuser in another group fixed Control panel – License politics error fixed, group licenses working after expiration Control panel – Communication with Lift8 during the call may result in application crash, fixed Graphic of tools – Resolution of application window setting changed All tools – After replacing from computer some empty directories resists, fixed Whole system – 2N logo changed Version: 2.8.4 Final version: 2.8.4.33.21 Date: 15.5.2023 New features and improvements Change in licensing – control of connected devices, whether the amount agrees with license, timing of trial time period improved E-mail notification of exceeding number of licenses added Bugfixes Fixed errors in German translation for service tool Version: 2.8.4 Final version: 2.8.4.33.18 Date: 19.12.2022 New features and improvements Web address changed from www.2n.cz to www.2n.com Lift8 - Voice menu for Spain added Lift8 - Voice menu for Latin America (Spain) added Service tool – Fixed position of parameter groups, independently on languages L8 server - Support of LiftIP2 on Lift8 server Communicator - Dual audio output added – different audio output can be set for ringing and for call, improved management of connected audio devices Control Panel – Increased maximal length of intercom name from 15 to 49 characters Control Panel – Specific response (Custom) to Lift8 to confirm Checking call, Alarm call and Call to Lift8 added Bugfixes Fixed translation in tool texts and hints Fixed issues in manuals and in references to manual in tools Lift8, LiftIP – Support of SIP proxy registration after change in Netstar Service tool - Wrong functionality of calendar, when month changed, day of weeks stays from last month LiftIP – Checking call timeout can result to incorrect end of call when registration during the waiting changes LiftIP – Finding in logs improved, wrong function of help fixed Service tool - Selection of connection in service tool for LiftIP selects more than one connection Service tool – Hidden keyword for parameter 1122 – keyword for RTSP connection to camera in service tool Service tool – Improved search in logs, now is case sensitive Service tool – Graphical view to configuration fixed L8 Server – MapQuest API service change supported to keep map functionality unchanged L8 Server – Setting detail of server fixed Communicator - During incoming call to Communicator, the map is not visible Communicator – Wrong position of intercom position on map, when windows size changed, improved accuracy of position Communicator – Incorrect setting of audio device for input and output Communicator – Incorrect displaying of names of audio devices – 32 characters only Communicator – Adding new Lift8 fails in specific circumstances Control Panel - List of intercoms in Control panel doesn’t show added intercom before refresh, not full view to all intercoms as admin without selected group of intercom Control Panel - Configuration of maps available to prevent issues connected with end of service MapQuest Control Panel - Fixed error in setting of test E-mail Control Panel – CPC Antenna 2N Extension support bug fixed Control Panel – Specific response to Lift8 to confirm Checking call, Alarm call and Call to Lift8 fixed Control Panel – ID extraction from CPC Antenna 2N ext. protocol fixed Control Panel – Export of alarm call has missing information about Agent, when the value is Server Control Panel – Export of call from intercom detail shows only test call Version: 2.8.3 Final version: 2.8.3.33.14 Date: 28.6.2022 New features and improvements Lift8 – Identification of lift shaft in alarm call by voice message Lift8 – Alarm button self-test added, special type of alarm button needed Lift8 – Italian voice menu added Lift8 – Polish voice menu added Lift8 - Possibility to set siren output on the machine room communicator when alarm call activated Lift8 - Information E-mail from alarm call to Control Panel (additional functionality to E-mail notification about checking call) LiftIP – Italian voice menu added All tools - GUI of Lift8 supports seven languages: CZE, ENG, ESP, GER, FRA, ITA, RU Communicator - Plan or map of the area with marked locality of lift is visible during emergency call Communicator - Possibility to set keyboard shortcuts for define actions in Communicator to allow use of keyboard emulator Communicator – Test of microphone connection added Bugfixes Installation - Missing DLL libraries when Lift8 tools installed, mostly connected with Win10 Lift8 - Time overflow error – when Lift8 runs 49,7 days, timer overflow can result into unexpected irregularities in function. Lift8 – Alarm call with CPC Antena support failed in intercom identification – first number lost Lift8 - Time synchronization by SNTP on by default – log with correct timing supported LiftIP – issue with Payload Type for DTMF LiftIP – communication issue with AVAYA – too long packets LiftIP – After change of configuration confirmed by password, wrong password reported Service tool - doesn’t correctly display all parameters depending on screen resolution Service tool – incorrect filter, only numbers applied Service tool – Device info error when older device connected because of missing hw info L8 Server - Special characters for example - !@#$% - can’t be used as part of the SIP password L8 Server - after change of IP address on connected PC registration failure occur L8 Server – Error occur when E-mail report sent to three or more address L8 Server – Empty E-mail address for notification results into application lock or sending error Communicator - Deleting of Control panel user, who is registered in Communicator results In lock of the application Communicator - crash when display resolution changes Communicator - direct call user is not correctly signed off after user delete performed Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator - crash when display resolution changes Communicator - direct call user is not correctly signed off after user delete performed. Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator - doesn’t allow moving of map by scrollbar Communicator – when size of map changed, the change is not permanent Communicator – When filtering by length of call or agent used, application crashes Control panel - When Call server is set, correct visualization of all details in graphics is not guaranteed Control panel – forced save of storage setting before next step can be performed Control panel – When more intercoms on one plan placed, it is not possible to remove any of them Control Panel – Test of storge availability, if lost, warning generated Control Panel – searching of intercom by address in map failed |
|||||||||
Firmware
| Nome do arquivo | Categoria | Tipo | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Firmware 3.2.0 - 2N IP Force 2.0 | Software e firmware | Firmware | |||||||
2N OS version 3.2.0 for 2N Intercoms includes the following changesNew Functions and Improvements
Essential Corrections
4f6c76fa1a4ca12c9f8c4a861996523b5a20c8ff269338d5197301f9e34a5522
|
|||||||||
| Firmware 3.2.0 - 2N Lift IP 2.0 | Software e firmware | Firmware | |||||||
2N OS version 3.2.0 for 2N Elevator Systems includes the following changesNew Functions and Improvements
Essential Corrections
61604237bd5c0dea463832fb655b242219b6c6c1c90d4826bef3ee74f71ea22d
|
|||||||||
| Firmware 3.2.0 - Axis A4610 | Software e firmware | Firmware | |||||||
Firmware version 3.2.0 for AXIS Access Control Readers includes the following changesEssential Corrections
fe38ebfdbce01d5b01bfacca32f9b0057be005efed2c0adb10232d80d53cfee1
|
|||||||||
| Firmware 2.50.0 - 2N SIP Audio System | Software e firmware | Firmware | |||||||
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
fc2f9b3c00dbed82ce7f7e7557a50b85c004ac3bf671dd9d1a3319570b2bbe6b
|
|||||||||
| Firmware 2.50.1 - 2N IP Verso, Solo, LTE Verso | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
c2681f75d7f78274e2e8eb84938d3a618d3147d033947428c0c946c92adb7fe4
|
|||||||||
| Firmware 2.50.1 - 2N IP Vario, Force, Safety | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
b080eef21ac4dab1a1b20a429a04551d222fe4a66faebf0f1079ab711986c206
|
|||||||||
| Firmware 2.50.1 - 2N IP Uni | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
785b5a122348149a44af09ebc54084c7e917c88c3739207d5f59a8b12baa13af
|
|||||||||
| Firmware 2.50.1 - 2N IP Base | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
ddfa94531083ab41402acb6beba3956e0df1b561dcfc9dfd2e2fe4e617a4d316
|
|||||||||
| Firmware 2.50.1 - 2N Audio Kit | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
c4a163329f8b0be7f158b012b636428f24690ba1a904cce555c57ee6397ea809
|
|||||||||
| Firmware 2.50.1 - 2N Access Unit | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N IP Access Control Systems includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
a0c950c96b61b83e2eb69e2f29ef58dcadeb5d3560b8225f4d0820be92a26ef8
|
|||||||||
| Firmware 3.2.0 - Axis I5304 | Software e firmware | Firmware | |||||||
Firmware version 3.2.0 for AXIS Access Control Readers includes the following changesEssential Corrections
6551ea83efcd0d0f0a8e04aa941342cd452dc6bc6edff4e3a34f564d178fda26
|
|||||||||
| Firmware 3.2.0 - Axis A4612 | Software e firmware | Firmware | |||||||
Firmware version 3.2.0 for AXIS Access Control Readers includes the following changesEssential Corrections
fe38ebfdbce01d5b01bfacca32f9b0057be005efed2c0adb10232d80d53cfee1
|
|||||||||
Outros documentos
| Nome do arquivo | Categoria | Tipo | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Firmware 3.2.0 - 2N IP Force 2.0 | Software e firmware | Firmware | |||||||
2N OS version 3.2.0 for 2N Intercoms includes the following changesNew Functions and Improvements
Essential Corrections
4f6c76fa1a4ca12c9f8c4a861996523b5a20c8ff269338d5197301f9e34a5522
|
|||||||||
| Software 3.6.1 - 2N Access Commander (VirtualBox, VMware) | Software e firmware | Programas | |||||||
2N Access Commander version 3.6.1 (May 2026)2N Access Commander version 3.6 introduces a faster way to configure devices through device templates, a centralised call log for intercoms, a dedicated Company Admin role for managing organisation-level settings, and several quality-of-life improvements throughout the system. Bugs fixed in 3.6.1:Addresses a critical bug that a ects a small number of Access Commander Box installations and My2N app pairing. New Features:Device TemplatesAdmins can now save and edit the configuration file of any 2N OS–based device and apply it to other devices individually or in bulk.
Important:
Call logsCall logs provide administrators with a single, unified view of incoming and outgoing calls from all intercoms and elevator communication devices.
Please note: If both the caller and receiver are managed by Access Commander, the system Company admin roleThe new Company Admin role gives designated users control over company-specific settings that previously required full administrator rights. This role can be combined with others such as User Manager or Visitor Manager, depending on requirements. Company Admin rights include:
Other improvements:Pairing with the My2N mobile app is now faster and more secure. Users can pair the app via a QR code displayed in Access Commander or from a link or QR code sent by email. (Supported on devices running FW 2.50/3.0 and higher).
Required Device Firmware Versions for Full Feature Support
Note - some older 2N devices cannot support versions higher than 2.50. Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
|
|||||||||
| Software 3.6.1 - 2N Access Commander (Hyper-V) | Software e firmware | Programas | |||||||
2N Access Commander version 3.6.1 (May 2026)2N Access Commander version 3.6 introduces a faster way to configure devices through device templates, a centralised call log for intercoms, a dedicated Company Admin role for managing organisation-level settings, and several quality-of-life improvements throughout the system. Bugs fixed in 3.6.1:Addresses a critical bug that a ects a small number of Access Commander Box installations and My2N app pairing. New Features:Device TemplatesAdmins can now save and edit the configuration file of any 2N OS–based device and apply it to other devices individually or in bulk.
Important:
Call logsCall logs provide administrators with a single, unified view of incoming and outgoing calls from all intercoms and elevator communication devices.
Please note: If both the caller and receiver are managed by Access Commander, the system Company admin roleThe new Company Admin role gives designated users control over company-specific settings that previously required full administrator rights. This role can be combined with others such as User Manager or Visitor Manager, depending on requirements. Company Admin rights include:
Other improvements:Pairing with the My2N mobile app is now faster and more secure. Users can pair the app via a QR code displayed in Access Commander or from a link or QR code sent by email. (Supported on devices running FW 2.50/3.0 and higher).
Required Device Firmware Versions for Full Feature Support
Note - some older 2N devices cannot support versions higher than 2.50. Minimum Supported Firmware Versions (Devices running firmware older than these versions will not sync with Access Commander)
|
|||||||||
| Firmware 3.2.0 - 2N Lift IP 2.0 | Software e firmware | Firmware | |||||||
2N OS version 3.2.0 for 2N Elevator Systems includes the following changesNew Functions and Improvements
Essential Corrections
61604237bd5c0dea463832fb655b242219b6c6c1c90d4826bef3ee74f71ea22d
|
|||||||||
| Firmware 3.2.0 - Axis A4610 | Software e firmware | Firmware | |||||||
Firmware version 3.2.0 for AXIS Access Control Readers includes the following changesEssential Corrections
fe38ebfdbce01d5b01bfacca32f9b0057be005efed2c0adb10232d80d53cfee1
|
|||||||||
| Firmware 2.50.0 - 2N SIP Audio System | Software e firmware | Firmware | |||||||
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
fc2f9b3c00dbed82ce7f7e7557a50b85c004ac3bf671dd9d1a3319570b2bbe6b
|
|||||||||
| 2N Repainting Guide | Técnica | Manual | |||||||
|
|||||||||
| Declaration of conformity (EN) - 2N EasyGate IP+ RED DoC | Técnica | Declaração de Conformidade | |||||||
|
|||||||||
| Firmware 2.50.1 - 2N IP Verso, Solo, LTE Verso | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
c2681f75d7f78274e2e8eb84938d3a618d3147d033947428c0c946c92adb7fe4
|
|||||||||
| Firmware 2.50.1 - 2N IP Vario, Force, Safety | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
b080eef21ac4dab1a1b20a429a04551d222fe4a66faebf0f1079ab711986c206
|
|||||||||
| Firmware 2.50.1 - 2N IP Uni | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
785b5a122348149a44af09ebc54084c7e917c88c3739207d5f59a8b12baa13af
|
|||||||||
| Firmware 2.50.1 - 2N IP Base | Software e firmware | Firmware | |||||||
2N OS version 2.50.1 for 2N Intercoms includes the following changesEssential Corrections
2N OS version 2.50.0 for 2N Intercoms includes the following changesPrecautions to be taken during update to FW version 2.50.x
New Functions and Improvements
Essential Corrections
ddfa94531083ab41402acb6beba3956e0df1b561dcfc9dfd2e2fe4e617a4d316
|
|||||||||
FAQ
- 2N 2Wire - Installation and Configuration
- 2N Fortis deployment with 2N Access Commander and Fortis Commander
- 2N IP intercoms, Access Units, IP audio units - Firmware upgrade
- 2N IP Intercoms - Diagnostics and Troubleshooting
- 2N IP Intercoms - External IP camera connection (Axis IP camera guide included)
- 2N IP Intercoms - Factory reset
- 2N IP Intercoms - IP Address retrieval
- 2N IP Intercoms - User sounds uploading
- 2N IP Intercoms – Integration with 3rd party NVR/VMS systems without ONVIF and RTSP
- 2N Network Scanner - Locating 2N devices in the network
- 2N Student Monitoring System with 2N IP Intercoms
- Access key - How to configure on the Indoor Touch
- Access logs of 2N Mobile Key
- Automation, 2FA - How to configure 2FA on 2N IP Intercoms
- Automation, Black/whitelist - How to block or allow specific numbers to call an intercom
- Automation, Call Delay - how to set a different ring time for diferent call destinations
- Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
- Automation, Card Call - Initiating a call after card verification
- Automation, DoorOpenTooLong - Securing door against excessively long opening on 2N IP Intercoms
- Automation, Multicast - Configuring Lock/Unlock all feature on 2N IP Intercoms
- Automation, Multicast - How to receive multicast paging from up to 5 sources
- Automation, Multicast paging - How to configure paging from 2N IP Intercoms
- Automation, Multicast - Receiving multicast paging from up to 5 sources
- Automation, one-time access - How to set up one-time codes with automation
- Automation, OpenDoor - Controling the card reader signalization
- Automation, Silent Alarm - How to configure silent alarm on 2N IP Intercoms
- Automation, UnauthorisedDoorOpen - Securing doors against unauthorised door opening in 2N IP Intercoms
- Auto Provisioning via TFTP
- Axis Network I/O Relay - Controlling using HTTP commands
- Bluetooth - Encryption Keys for Location
- Calling locally between 2N IP intercom and 2N IP Phone D7A
- Card reader gets stuck
- Certification for web authentication
- Communication between 2N Indoor Compact and 2N IP intercom via Device ID
- Communication via Device ID of 2N IP intercom
- Comparison of IP Verso and LTE Verso
- Configuration of electrical outputs on 2N IP Intercoms
- Configuring email notification on 2N indoor Touch
- Configuring Wildix VoIP PBX with 2N IP Intercom
- Congifuring more unlock buttons in 2N Answering Units
- Connecting WaveStore VMS to 2N IP Intercom
- Connection and configuration of a door contact to 2N IP Intercom/Access Unit
- Connection of 2 devices to one lock
- Connection of external buttons to the 2N IP Intercom
- Direct call without SIP Proxy registration
- Disabling the video preview with the 2N IP intercom outside the call?
- Display configuration
- Door lock does not open after dialing 00
- Door section - configuration on the 2N IP Intercoms
- Electric locks in 2N IP Intercom accessories
- External IP Relay 9137410E & 9137411E - Controlling using HTTP commands from a 2N IP intercom or 2N Access Unit
- External USB readers - Driver installation & usage
- External USB RFID reader 125kHz EMarine - Usage without any additional driver
- Gmail SMTP Service - How to configure with Intercom units
- Grandstream GXV3140 - How to set it up with a 2N IP Intercom
- Grandstream GXV3175v2 - How to set it up with a 2N IP Intercom
- Grandstream GXV3240 - How to set it up with a 2N IP Intercom
- Grandstream GXV3275 - How to set it up with 2N IP Intercom
- Homebridge plugin for 2N intercoms
- How to control 2N Indoor Touch via Automation of 2N IP intercom
- How to integrate 2N IP Devices with MS Teams
- How to provide all information to effectively resolve a technical issue with 2N OS device
- How to send/receive separate multicast streams on 2N IP Intercoms via Automation
- How to use Group Authentication / Access key in communication between 2N IP Intercoms and 2N Indoor Touch
- HTTP API - Configuration upload
- HTTP Commands – How to configure them in Answering units
- Import of users from device
- Induction loop for 2N IP Intercoms and Answering units
- Integration the Grandstream HT801 with 2N IP Intercom
- Intergration Loxone Miniserver with 2N intercom
- Issues accessing the web interface on macOS
- KNX connectivity with 2N IP Intercoms
- Language mutation - How to create own language mutation for 2N IP Intercoms
- Lift access control - configuring 2N systems
- Management over the Internet
- MicroSIP - Direct call with 2N IP Intercom
- Milestone XProtect - Alarm event from 2N device on Milestone XProtect
- Milestone XProtect and 2N IP Intercom integration
- Milestone XProtect Smart Client - log operator's actions
- Milestone XProtect - Video Pop-up on 2N Device's Action
- Multicast Discovery function on 2N Indoor Touch 2.0
- Multicast Stream configuration with IP Audio Manager
- My2N App Offline Pairing - Opening doors via Bluetooth
- No video? Try to check the following solutions!
- Offline Bluetooth pairing and modes (Tap In App, Touch On Device, Card, Motion Detection)
- OpenVPN server & client
- Password recovery in 2N OS devices
- REX button connectivity
- RFID Card/RFID Tag Configuration
- Setting up 2N IP Intercom with SNOM 760 phone
- Setting up call from a 2N IP intercom to a 2N Indoor Talk and vice versa
- Setting up calls from and to 2N IP intercom
- Setting up Grandstream GXV3672 for external camera for 2N IP Intercom
- Seznam SMTP service - How to configure with Intercom units
- SIP Proxy registration
- SIP Proxy registration on IP intercoms
- Slideshow on 2N IP Intercoms display
- Starting manual for integration with 2N IP Intercoms
- Static IP address in 2N IP Intercoms
- Tamper switch - Location (installation) and configuration
- The example of OSDP module connecting and using on 2N Intercom
- Time Profiles
- Troubleshooting basics – Configuration backup, network trace, syslog and ping tool on 2N IP Intercoms
- Upload a video to display on 2N IP Intercom
- Vega LPR integration with 2N IP Intercoms and Access Units
- Video - 2N IP Intercom - How to switch between internal and external cameras using DTMF
- Video - 2N IP intercom - IP address, how to find it out and switch between DHCP and static modes
- Video - 2N IP intercoms - Calling multiple destinations in sequence and in parallel by pressing one button
- Video - 2N IP Verso - Fingerprint module installation and configuration
- Video - 2N IP Verso - Flush frame installation - brickwall
- Video - 2N IP Verso - Flush frame installation - plasterboard
- Video - 2N OS devices - Factory Reset procedure
- Video - 2N® IP Verso - Touch display module options
- Video - Configuration of 2N IP intercom with 2N IP Eye
- Video issue - 2N IP Intercom does not send video during a call
- Virtual Card ID
- Virtual Numbers and Telephone Mode
- VLC media player - watch and record video from 2N IP Intercom
- Web interface access - 2N IP intercoms
- Wiegand interface Configuration in 2N Intercom
- Wiegand interface - Function overview
Especificações técnicas
/
-
Botões
- Design de botões:
- botões transparentes com luz de fundo branca e etiqueta facilmente removível
- Número de botões:
- 1 a 146
- Teclado numérico:
- opcional
-
Áudio
- Microfone:
- 1 microfone embutido
- Alto-falante:
- 2W/8 Ω
- Pressão sonora a 1KHz a 1M de distância:
- 78dB
-
Stream de áudio
- Codecs:
- G.711, G.729, G.722, 16kHz
-
Câmera (opcional)
- Resolução – JPEG:
- 1280 x 960 px
- Resolução – Videochamada:
- 640 x 480px
- Ângulo de visão:
- 128° (H), 95° (V), 134° (D)
- Visão noturna:
- sim
-
Transmissão de vídeo
- Codecs:
- H.263, H.263+, H.264, MJPEG, MPEG-4
-
Tela sensível ao toque (opcional)
- Temperatura de operação:
- -20 a 60°C
- Nível de cobertura:
- IK07
-
Leitor Bluetooth (opcional)
- Versão:
- compatível com Bluetooth 5.0 (BLE)
- Faixa:
- curto - normalmente até 3 m, longo - normalmente até 10m, As distâncias devem servir apenas como um guia aproximado e podem variar de acordo com o modelo do telefone e o ambiente de instalação
- Segurança:
- 128criptografia
- Sensibilidade RX:
- 93dB
- Modo:
- toque, Toque no app, cartão
-
Leitor de cartão RFID (opcional)
- Frequências suportadas:
- 125kHz, 13.56MHz
- Tipos de cartão suportados:
- A compatibilidade do tipo de cartão depende do número do pedido.
- 125 KHz:
- EM4xxx, 125kHz
- 13,56 MHz:
- ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N Mobile Key)
- Protegido 13,56 MHz:
- ISO14443A (MIFARE® DESFire®), PicoPass (Classe HID), FeliCa, ST SR(IX), NFC (2N Mobile Key), HID SE Seos, iClass, MIFARE SE, lê a ID dos PACs (cartões HID iClass com objeto SIO)
-
Leitor de impressões digitais (opcional)
- Sensor:
- sensor óptico protegido por vidro resistente
- Confiabilidade:
- algoritmo para detecção de impressão digital falsa
- Resistência:
- resistente à água e à poeira
- Sinalização de status:
- acústico e com o auxílio de LEDs multicoloridos
- Área de detecção:
- grande, com dimensões de 15,24 x 20,32mm
- Temperatura de funcionamento:
- -20 a 55°C
- Certificação:
- FBI PIV
-
Interfaces
- Fonte de alimentação:
- 12V ± 15% / 2A DC
- Conexão de rede:
- Bandas da UE (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800), Bandas dos EUA (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700)
- Utilização típica de dados:
- 30MB/mês mais 4MB/minuto de chamada (serviços adicionais podem aumentar a utilização de dados),
- Saída do interrutor:
- Contatos NC/NO, 30V, CA, CC, 1A
- Saída do interruptor ativo:
- 8 a 12V, DC
- Interruptor de violação:
- acessório opcional
- Protocolos suportados:
- SIP2.0, Opção DHCP. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Log de sistema
-
Propriedades mecânicas
- Temperatura operacional:
- -40 a 60°C
- Temperatura de armazenamento:
- -40 a 70°C
- Umidade relativa de operação:
- (sem condensação) 10 - 95%
- Nível de cobertura externa oficialmente certificado:
- IP54, IK08
-
Estrutura de montagem em superfície - Dimensões
- 1 Módulo:
- 107 (L) x 130 (A) x 28 (P) mm
- 2 Módulos:
- 107 (L) x 234 (A) x 28 (P) mm
- 3 Módulos:
- 107 (L) x 339 (A) x 28 (P) mm
-
Estrutura de montagem embutida - Dimensões
- 1 Módulo:
- 130 (L) x 153 (A) x 5 (P) mm
- 2 Módulos:
- 130 (L) x 257 (A) x 5 (P) mm
- 3 Módulos:
- 130 (L) x 361 (A) x 5 (P) mm
-
Caixa de montagem embutida (dimensões mínimas dos furos)
- 1 Módulo:
- 108 (W) x 136 (H) x 45 (D)mm
- 2 Módulos:
- 108 (W) x 240 (H) x 45 (D)mm
- 3 Módulos:
- 108 (W) x 346 (H) x 45 (D)mm
-
Outros
- Protocolo de sinalização:
- SIP 2.0 (RFC - 3261)
Tutoriais em vídeo
Precisa falar com alguém?
Nossa equipe está aqui para você! Selecione sua região ou foco
Converse com um técnico
Para entrar em contacto com o nosso técnico, utilize o chat na parte inferior desta página. Sem bots: fale com um técnico 2N real utilizando o nosso chat ao vivo
Disponível das 9h às 16h30 CET
Ligue para nós
Disponível das 9h às 17h CET (de segunda a sexta-feira).
- Geral (checo, inglês) +420 228 880 382
- Reino Unido +44 203 510 5770
- França +33 1 88 89 02 98
- Alemanha +49 4133 2029999
- Espanha +34 919 540 607
-
Itália +39 02 3055 9053
Formulário de contacto
Preencha o nosso formulário de suporte técnico e alguém entrará em contacto consigo o mais rapidamente possível.
Contato para suporte técnico dos EUA
Chame-nos
- Geral 1-800-444-2947
Formulário de contato
Faça login com sua conta online Axis e crie um novo bilhete.
Portal de suporte para distribuidores 2N e CIP
Crie e gerencie os seus casos técnicos.
Suporte por telefone
Prepare seu PIN e ligue para nós em:
- Tcheco +420 228 880 384*
- Inglês +420 228 880 574*