Suporte ao produto 2N LTE Verso

Primeiro interfone 4G do mundo

Aplicativos e Software
Firmware
Manuais
Outros documentos
Perguntas frequentes
Especificações técnicas
Tutoriais em vídeo

Aplicativos e software

Nome do arquivo	Categoria	Tipo

Firmware

Nome do arquivo

Categoria

Tipo

Firmware 2.50.1 - 2N IP Verso, Solo, LTE Verso

Software e firmware

Firmware

Baixar

Data de Publicação:	22/05/2026
Tamanho do arquivo:	11 MB
Tipo	application/x-zip-compressed

2N OS version 2.50.1 for 2N Intercoms includes the following changes

Essential Corrections

Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Added support for a new Vbus display revision.
Improved ACS connection stability.
Updated several internal libraries.
Important bug fixes.

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
Due to essential authentication updates for an improved user experience, you must restart the ACS server to restore connectivity for devices upgraded from a version lower than 2.49.0 to version 2.49.0 or higher.

New Functions and Improvements

Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.

Essential Corrections

Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
Other corrections and fixes.

Baixar notas de versão

Firmware 2.50.0 - 2N IP Verso, Solo, LTE Verso

Software e firmware

Firmware

Baixar

Data de Publicação:	16/12/2025
Tamanho do arquivo:	11 MB
Tipo	application/x-zip-compressed

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Hardware > Audio > Startup and Network States Signalization`.
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

New Functions and Improvements

Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.

Essential Corrections

Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
Other corrections and fixes.

Baixar notas de versão

Últimos Manuais

Outros documentos

Filter

Categoria

Marketing

Técnica

32 resultados

Nome do arquivo

Categoria

Tipo

BIM objects intercoms (EN)

Técnica

CAD e BIM

Baixar

Data de publicação:	11/06/2026
Tamanho do arquivo:	209 MB
Tipo	application/x-zip-compressed

A&E specifications Verso 2.0

Técnica

Especificações A&E

Baixar

Data de publicação:	10/06/2026
Tamanho do arquivo:	265 kB
Tipo	application/x-zip-compressed

Firmware 2.50.1 - 2N IP Verso, Solo, LTE Verso

Software e firmware

Firmware

Baixar

Data de publicação:	22/05/2026
Tamanho do arquivo:	11 MB
Tipo	application/x-zip-compressed

2N OS version 2.50.1 for 2N Intercoms includes the following changes

Essential Corrections

Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Added support for a new Vbus display revision.
Improved ACS connection stability.
Updated several internal libraries.
Important bug fixes.

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
Due to essential authentication updates for an improved user experience, you must restart the ACS server to restore connectivity for devices upgraded from a version lower than 2.49.0 to version 2.49.0 or higher.

New Functions and Improvements

Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.

Essential Corrections

Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
Other corrections and fixes.

Download das notas de versão

Datasheet - Bluetooth & RFID Reader 125kHz, 13.56MHz, NFC

Marketing

Ficha de dados

Baixar

Data de publicação:	16/04/2026
Tamanho do arquivo:	116 kB
Tipo	application/pdf

2N Product Catalogue (EN)

Marketing

Catálogo

Baixar

Data de publicação:	21/01/2026
Tamanho do arquivo:	15 MB
Tipo	application/pdf

Firmware 2.50.0 - 2N IP Verso, Solo, LTE Verso

Software e firmware

Firmware

Baixar

Data de publicação:	16/12/2025
Tamanho do arquivo:	11 MB
Tipo	application/x-zip-compressed

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Hardware > Audio > Startup and Network States Signalization`.
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.

New Functions and Improvements

Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.

Essential Corrections

Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
Other corrections and fixes.

Download das notas de versão

Ficha técnica - (EN) 2N LTE-Verso (LQ)

Marketing

Ficha de dados

Baixar

Data de publicação:	15/07/2025
Tamanho do arquivo:	220 kB
Tipo	application/pdf

Apresentação (EN) - 2N IP Intercoms

Marketing

Apresentações

Baixar

Data de publicação:	17/06/2025
Tamanho do arquivo:	73 MB
Tipo	application/vnd.openxmlformats-officedocument.presentationml.presentation

2N Induction Loop Photos

Marketing

Photos

Baixar

Data de publicação:	03/06/2025
Tamanho do arquivo:	3 MB
Tipo	application/zip

2N Manual de endurecimento_EN.pdf

Técnica

Security

Baixar

Data de publicação:	30/05/2025
Tamanho do arquivo:	2 MB
Tipo	application/pdf

Padrão de perfuração (EN) - 2N IP Verso installation with inclination

Técnica

Padrão de perfuração

Baixar

Data de publicação:	28/05/2025
Tamanho do arquivo:	972 kB
Tipo	application/pdf

Padrão de perfuração (EN) - 1M Frame Installation 2N IP Verso

Técnica

Padrão de perfuração

Baixar

Data de publicação:	26/05/2025
Tamanho do arquivo:	675 kB
Tipo	application/pdf

Carregar mais

FAQ

Especificações técnicas

Botões

Design de botões:

botões transparentes com luz de fundo branca e etiqueta facilmente removível

Número de botões:

1 a 146

Teclado numérico:

opcional
Áudio

Microfone:

1 microfone embutido

Alto-falante:

2W/8 Ω

Pressão sonora a 1KHz a 1M de distância:

78dB
Stream de áudio

Codecs:

G.711, G.729, G.722, 16kHz
Câmera

Resolução - JPEG:

1280 x 960 px

Resolução - Chamada de vídeo:

640 x 480 px

Ângulo de visão:

128°, 95° (V), 134° (D)

Visão noturna:

sim
Transmissão de vídeo

Codecs:

H.263, H.263+, H.263, H.263+, H.264, MJPEG, MPEG-4
Tela sensível ao toque (opcional)

Temperatura de operação:

-20 a 60°C

Nível de cobertura:

IK07
Leitor Bluetooth (opcional)

Versão:

compatível com Bluetooth 5.0 (BLE)

Faixa:

curto - normalmente até 3 m, longo - normalmente até 10m, As distâncias devem servir apenas como um guia aproximado e podem variar de acordo com o modelo do telefone e o ambiente de instalação

Segurança:

128criptografia

Sensibilidade RX:

93dB

Modo:

toque, Toque no app, cartão
Leitor de cartão RFID (opcional)

Frequências suportadas:

125kHz, 13.56MHz

Tipos de cartão suportados:

A compatibilidade do tipo de cartão depende do número do pedido.

125 KHz:

EM4xxx, 125kHz

13,56 MHz:

ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N Mobile Key)

Protegido 13,56 MHz:

ISO14443A (MIFARE® DESFire®), PicoPass (Classe HID), FeliCa, ST SR(IX), NFC (2N Mobile Key), HID SE Seos, iClass, MIFARE SE, lê a ID dos PACs (cartões HID iClass com objeto SIO)
Leitor de impressões digitais (opcional)

Sensor:

sensor óptico protegido por vidro resistente

Confiabilidade:

algoritmo para detecção de impressão digital falsa

Resistência:

resistente à água e à poeira

Sinalização de status:

acústico e com o auxílio de LEDs multicoloridos

Área de detecção:

grande, com dimensões de 15,24 x 20,32mm

Temperatura de funcionamento:

-20 a 55°C

Certificação:

FBI PIV
Interfaces

Fonte de alimentação:

12V ± 15% / 2A DC

Conexão de rede:

Bandas da UE (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800), B3(1800), B7(2600), B8(900), B20(800), Bandas dos EUA (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700), B4(AWS1700), B5(850), B12/B13(700), 0,2C, 23dB

Utilização típica de dados:

30MB/mês mais 4MB/minuto de chamada (serviços adicionais podem aumentar a utilização de dados),

Saída do interrutor:

Contatos NC/NO, 30V, CC, CA, 1A

Saída do interruptor ativo:

12V, máx. 400mA

Interruptor de violação:

acessório opcional

Protocolos suportados:

SIP2.0, Opção DHCP. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Log de sistema
Propriedades mecânicas

Temperatura operacional:

-40 a 60°C

Temperatura de armazenamento:

-40 a 70°C

Umidade relativa de operação:

(sem condensação) 10 - 95%

Nível de cobertura externa oficialmente certificado:

IP54, IK08
Estrutura de montagem em superfície - Dimensões

1 Módulo:

107 (L) x 130 (A) x 28 (P) mm

2 Módulos:

107 (L) x 234 (A) x 28 (P) mm

3 Módulos:

107 (L) x 339 (A) x 28 (P) mm
Estrutura de montagem embutida - Dimensões

1 Módulo:

130 (L) x 153 (A) x 5 (P) mm

2 Módulos:

130 (L) x 257 (A) x 5 (P) mm

3 Módulos:

130 (L) x 361 (A) x 5 (P) mm
Caixa de montagem embutida (dimensões mínimas dos furos)

1 Módulo:

108 (W) x 136 (H) x 45 (D)mm

2 Módulos:

108 (W) x 240 (H) x 45 (D)mm

3 Módulos:

108 (W) x 346 (H) x 45 (D)mm

No momento, não há tutoriais em vídeo disponíveis para este produto.

Precisa falar com alguém?

Nossa equipe está aqui para você! Selecione sua região ou foco

Suporte ao cliente
Suporte para distribuidores 2N e CIP
Produto adquirido a um distribuidor 2N
Garantia e RMA

Converse com um técnico

Para entrar em contacto com o nosso técnico, utilize o chat na parte inferior desta página. Sem bots: fale com um técnico 2N real utilizando o nosso chat ao vivo
Disponível das 9h às 16h30 CET

Ligue para nós

Disponível das 9h às 17h CET (de segunda a sexta-feira).

Geral (checo, inglês) +420 228 880 382
Reino Unido +44 203 510 5770
França +33 1 88 89 02 98
Alemanha +49 4133 2029999
Espanha +34 919 540 607
Itália +39 02 3055 9053

Formulário de contacto

Preencha o nosso formulário de suporte técnico e alguém entrará em contacto consigo o mais rapidamente possível.

Entre em contacto connosco

Contato para suporte técnico dos EUA

Chame-nos

Geral 1-800-444-2947

Formulário de contato

Faça login com sua conta online Axis e crie um novo bilhete.

Entre em contato conosco

Portal de suporte para distribuidores 2N e CIP

Crie e gerencie os seus casos técnicos.

Aceder ao portal de suporte

Suporte por telefone

Prepare seu PIN e ligue para nós em:

Tcheco +420 228 880 384*
Inglês +420 228 880 574*

* Disponível de 9:00 am a 5:00 pm EST

Aplicativos e software

Filter

Firmware

Filter

2N OS version 2.50.1 for 2N Intercoms includes the following changes

Essential Corrections

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

New Functions and Improvements

Essential Corrections

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

New Functions and Improvements

Essential Corrections

Últimos Manuais

Installation Manual - 2N LTE Verso (2.50)

Installation Manual - 2N LTE Verso (2.49)

Automation manual

HTTP API manual

Outros documentos

Filter

2N OS version 2.50.1 for 2N Intercoms includes the following changes

Essential Corrections

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

New Functions and Improvements

Essential Corrections

2N OS version 2.50.0 for 2N Intercoms includes the following changes

Precautions to be taken during update to FW version 2.50.x

New Functions and Improvements

Essential Corrections

FAQ

Especificações técnicas

Botões

Áudio

Stream de áudio

Câmera

Transmissão de vídeo

Tela sensível ao toque (opcional)

Leitor Bluetooth (opcional)

Leitor de cartão RFID (opcional)

Leitor de impressões digitais (opcional)

Interfaces

Propriedades mecânicas

Estrutura de montagem em superfície - Dimensões

Estrutura de montagem embutida - Dimensões

Caixa de montagem embutida (dimensões mínimas dos furos)

Precisa falar com alguém?

Converse com um técnico

Ligue para nós

Formulário de contacto

Contato para suporte técnico dos EUA

Chame-nos

Formulário de contato

Portal de suporte para distribuidores 2N e CIP

Suporte por telefone