Access Rules
The page sets the parameters and unlocking logic for the door managed by the device door switch. This configuration determines how access requests (authentication) are evaluated, the conditions necessary for successful user authorization and the rules for managing individual accesses.
While individual rights are set in the user settings, the access rules determine when, under what conditions and how these permissions can be used. For example, you can set whether door passage is allowed in one direction only, whether authentication can trigger a silent alarm, or whether the user may authenticate only once per defined time interval.
Door and Lock Status
The tab shows whether the door switch is active and whether the door is open.
“Open” – access has been granted, the door switch is closed and the door can be opened.
“Closed” – the door is locked and cannot be opened.
“Unlocked” – the switch is active and can be operated.
“Locked” – the switch is disabled and cannot be controlled by the access rules.
Tip
The button with the lock symbol on this tab is used for locking/unlocking the switch from the web interface.
Door Detection
On the tab, you can enable that an unauthorized or excessively long door opening will trigger an event. This event can then be followed by actions via Automation. The events are also written into the device log.