Technical Parameters
Power supply types | |
|---|---|
PoE | IEEE PoE 802.3af (Class 0, max. 12,95 W) (Class 0, max. 12.95 W) |
External supply | 12 V ±15 % / 1 A DC |
Warning
2N Access Unit 2.0 with HW version 599v4 or lower cannot be fed from an external power supply and PoE at the same time. A combined supply might result in a device damage.
Audio | |
|---|---|
Speaker | 0.8 W / 8 Ω |
Interface | |
|---|---|
LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 |
Recommended cabling | Cat-5e or higher |
Supported protocols | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
Passive switch (relay) | NO/NC contact, up to 30 V / 1 A AC/DC |
Active switch output | 8 to 12 V DC according to power supply, up to 600 mA
|
Tamper Switch (part of the 2N Access Unit 2.0 main unit) | |
|---|---|
Inputs | Can be used in passive or active mode (-30 V to +30 V DC)
|
Bluetooth | |
|---|---|
Bluetooth | in compliance with BLE (Bluetooth Low Energy) |
RX sensitivity | up to –93 dBm |
Support of mobile applications | Android 10.0 and higher, iOS 17.0 and higher |
I/O module, Wiegand module | |
|---|---|
Dimensions | 43 x 31.5 x 1.5 mm |
Mechanical Parameters | ||
|---|---|---|
Cover | Robust zinc casting with surface finish (minor surface shade nuances are acceptable). | |
Body material | Versions:
| |
Surface installation dimensions | One-module | 107 x 130 x 28 mm |
Two-module | 107 x 234 x 28 mm | |
Flush installation dimensions | Frame – one-module | 130 x 153 x 5 mm |
Frame – two-module | 130 x 257 x 5 mm | |
Box (minimum wall hole) – one-module | 108 x 131 x 45 mm | |
Box (minimum wall hole) – two-module | 108 x 238 x 45 mm | |
Weight (depending on configuration) | Max. net | 2 kg |
Max. gross | 0.5 kg | |
Operating temperature | −40 °C to 60 °C | |
Relative humidity | 10 to 95 % (non-condensing) | |
Storing temperature | −40 °C to 70 °C | |
Recommended altitude | up to 2000 m | |
Protection class | IP54 | |
Resistance level | ||