Device Control
2N IP Style is an intercom allowing you to:
call other devices
use speed dial buttons
dial phone book position
dial phone number
receive and reject incoming calls
activate switch (e.g. door opening, lift control, etc.)
The device works as an authorization intermediary, which authenticates the user access rights and, if the user access is valid, activates the switch. The door lock, lifts etc. can be controlled by the switch.
The device control depends on the product version:
using RFID cards and chips – by tapping a card/chip on the device,
using the 2N My2N application – by pressing the device touchscreen in the vicinity of a mobile device with 2N My2N logged in,
using NFC,
using a QR code
using biometric data (fingerprint)
by entering a numeric access code via a keypad , touch keypad or in the 2N My2N application
control the device using a touch display
activate/deactivate users or profiles using the 2N My2N mobile application
Note
Refer the for call setup and assigning contacts to speed dial buttons.
Door Opening (Switch Activation) by RFID Card
2N IP Style is equipped with a door unlocking switch. To activate this switch, tap a valid card or chip on the integrated card reader. Remember to complete the user access card ID to get an RFID card / chip access.
Tap a valid RFID card / chip on the integrated card reader located in the bottom part of the device, whose symbol is backlit.
A valid RFID card / chip use is notified visually and by a continuous switch activation tone or a predefined unlocking user sound. An invalid RFID card / chip use is signaled acoustically
or using a user sound.
Door Opening (Switch Activation) by Code
2N IP Style is equipped with a door unlocking switch. Enter the valid code using the touch numeric keypad to activate this switch.
Enter the switch activating numeric code using the touch numeric keypad and press the
button for confirmation.A valid code is notified visually and by a continuous switch activation tone or a predefined unlocking user sound. An invalid code entry or interruption of the entry for a period longer than as set in the device web configuration interface, is announced by an audible
or a user-defined sound.
Door Opening (Switch Activation) by 2N My2N
2N IP Style is equipped with a door unlocking switch. Activate this switch using the 2N My2N authentication in your smartphone. The application is available for devices with iOS 12 and higher (iPhones 4s and higher) or Android 6.0 Marshmallow and higher (Bluetooth 4.0 Smart supporting phones).
The first step is different for different authorization modes:
Touch mode – press
or drag from left to right on the display (depending on the Bluetooth authentication setting) to activate the switch.Tap in app mode – unlock your smartphone, open the app and press the virtual button to activate the switch.
Motion mode – motion has to be detected by the device camera to activate the switch. Arrival in the proximity or waving of the hand will do.
Card mode – move your smartphone close to the integrated RFID card reader to activate the switch.
Switch activation is notified visually and by a continuous tone or a predefined user sound – unlocking. An invalid authentication is signaled acoustically
or using a user sound.