Brief Guidelines
Device Static/Dynamic IP Address Switching with Speed Dial Button
Take the following steps to reset the network settings and switch the static IP address (DHCP OFF) / dynamic IP address (DHCP OFF) mode in the device network configuration:
Connect the device to the power supply (if connected, disconnect and reconnect it).
Wait for the first sound signal.
Press the Speed dial button 15 times on the main unit.
Note
After the static address mode is switched on, the basic network parameters are reset to the following default values:
IP address: 192.168.1.100
Network mask: 255.255.255.0
Default gateway: 192.168.1.1