A dark, black background with a traffic light showing only the bright green light.

The Radio Equipment Directive (RED) and 2N: what you need to know

What is the Radio Equipment Directive (RED)?

The RED (Directive 2014/53/EU) ensures that all radio equipment sold in the EU meets essential requirements for safety, electromagnetic compatibility, and efficient use of the radio spectrum. From August 1st 2025, additional cybersecurity provisions will also apply. This means more stringent expectations for connected devices, including secure software updates, data protection, and resilience against network abuse.

2N is RED ready. Are you?

The Radio Equipment Directive (RED) is a key piece of legislation impacting all manufacturers and suppliers selling or importing radio equipment within the EU. At 2N, we’re RED ready, and we’re here to make sure you are too.

2N and RED: Our status

  • Yes! All 2N products produced by the end of May 2025 will be fully compliant with RED.

  • Compliant 2N products will continue to bear the CE mark, as required by EU regulations. In addition, starting from August 2025, all 2N-branded products will include a RED compliance mark on the regular 2N product label for easy identification. For added assurance, a formal statement of compliance is also available upon request.

2N products discontinued due to RED

As we take cybersecurity of our customers and products seriously, we have decided to discontinue some older 2N products that do not meet RED’s new requirements.

Here is a list of products that will be affected:

  • 2N LTE Verso
  • RFID readers and induction loop module for 2N IP Force
  • 2N IP Verso and its modules will have new terms of use


You can download the full list of affected products here:

Download

Text "Radio Equipment Directive (RED)" centered within the circle of yellow EU stars on a blue circuit board background.

What does RED mean for you?

    • Responsibility: Ensure that only compliant products are sold and distributed within the EU after 1st of August 2025.
    • What you need to do: Check product documentation, request compliance statements when necessary, and avoid selling legacy products beyond the cut-off.
    • 2N support: We provide all necessary technical documentation to support your compliance. 

    • Responsibility: Install and integrate only RED-compliant equipment into your projects from August 1st 2025 onward.
    • What you need to do: Confirm product compliance before installation, especially in new builds or renovations.
    • 2N support: We'll assist with guidance and documentation to ensure every install is RED compliant.

    • Responsibility: Ensure that all systems deployed in your developments are compliant with RED requirements.
    • What you need to do: Work closely with your technology partners and contractors to verify device compliance.
    • 2N support: We’ll help you future-proof your properties with RED-ready solutions

Do not hesitate to read our articles about the RED compliance

FAQs

  • The UK is no longer part of the EU, so RED does not apply directly. However, if you’re importing products into the EU or working on EU-based projects, compliance is essential. On the other hand, RED introduces higher levels of cybersecurity controls and precautions for customers and consumers, so why not use the momentum and raise the cybersecurity bar of your offering by following this new directive.

  • No. RED compliance is legally required for equipment placed on the EU market after the enforcement date. Installed equipment prior to this is not retroactively subject to the directive.

  • No significant impact is expected, but some legacy products may be phased out. We’ll do our best to  ensure you have access to RED-compliant alternatives with similar functionality.

  • Yes — statements of compliance are available upon request. Just contact your 2N representative.

Webinar Miniseries for System Integrators

To help you fully understand the impact of the RED Directive — and what it means for your business — we’ve prepared a short series of region-specific webinars tailored especially for system integrators.

Each session will walk you through:

Whether you're planning a new installation or maintaining existing systems, this is your chance to get expert advice, ask questions, and stay one step ahead of RED compliance.

Upcoming Webinars: What the EU RED Directive Means for You

Date and time Webinar Language Presenter Webinar registration link
September 2, 11 am - 12 pm CET English Petr Kosek Register here
September 3, 10 am - 11 am CET Czech / Slovak Petr Kosek, Ivan Čerjak Register here
September 4, 10 am - 11 am CET Spanish Sebastien Ledent Register here
September 8, 10 am - 11 am CET French Francois Mulot Register here

Contact us

Webinar library

2N RED Webinar for System Integrators

Download presentation