Product Description
In this section, we introduce the 2N LiftIP 2.0 product, outline its application options and highlight the advantages following from its use.
Basic Features
2N LiftIP 2.0 is an emergency elevator lift communicator providing full-duplex audio transmission via the VoIP technology directly from the elevator cabin. A microphone and a speaker are built-in behind the elevator panel for bidirectional communication. 2N LiftIP 2.0 is designed for sites where a LAN is available and connected via an RJ-45 connector. 2N LiftIP 2.0 can be fed either from a 10–30 V DC / 0.5 A external supply or directly from the LAN if equipped with PoE 802.3af supporting elements. From 2N LiftIP 2.0 you can only make calls to pre-programmed numbers. Thanks to IP connectivity, 2N LiftIP 2.0 can be constantly monitored, remotely configured and state detected. The advantage is the connection option for an almost unlimited count of communication units.
Advantages of Use
Basic announcement set playing
Recording of up to 8-minute long announcements (10 user messages)
Optimum acoustic properties
Adjustable speaker volume via audio unit buttons (during a call)
Configuration via device web interface
Checking call function once in 3 days (programmable)
Function indication – two LEDs meeting the applicable elevator regulations
Automatic redialing of up to four numbers
Protection against unintentional/useless startup (CANCEL)
Call control from control center
No additional power supply requirement if PoE is used
Easy installation into any elevator button panel
Powerful indication options – illuminated pictograms (including bulbs)
DTMF via RFC-2833, in-band or SIP INFO.