Technical Parameters

External supply

12 V ±15 % / 2 A DC (3 A for multiple modules)

SIP

UDP, TCP, TLS

Button design

Transparent, white backlit buttons with easily replaceable nametags

Button count

1 to multiples of 5 (depending on the configuration)

Button extenders

Up to 29 modules (limited by power supply)

Numeric Keypad

Optional

Microphone

Integrated

Amplifier

2 W (class D)

Speaker

2 W / 8 Ω

Sound pressure level (SPL max)

78 dB (for 1 kHz, distance 1 m)

LINE OUT

1 VRMS / 600 Ω

Volume Control

Adjustable with automatic adaptive mode

Full duplex

Yes (AEC)

Protocols

Codecs and Used Bandwidth

Sensor

1/3'' color CMOS

JPEG resolution

Up to 1280 x 960

Video resolution

640 x 480

Frame rate

30 fps

Sensor sensitivity

5.6 V/lux-sec (550 nm)

Viewing angle

125° (H), 105° (V)

Infrared illumination

Yes

Sensor sensitivity without IR light

0.1 Lux ± 20 %

Focal length

2.25 mm

Protocols

Video call codecs

Set the video codec data flows in Services > Phone > Video for calls and in Services > Streaming > RTSP for streaming. The set bit rate represents the value that the codec has to approach on a long-time average. The data flow can vary depending on the scene to be scanned.

ONVIF/RTSP streaming codecs

IP Camera Function

Yes – compatible profiles:

Connector

MMCX

Gain

4.1 dB

Power Supply

25 W

Operating temperature

-40 to +80°C

Dimensions

Maximum values:

Installation

With adhesive tape

Audio codecs

Video Codecs

Set the video codec data flows for calls in Services > Calls > SIP 1/2. Set streaming in Services > Streaming > RTSP. The set bit rate represents the value that the codec has to approach on a long-time average. The data flow can vary depending on the scene to be scanned.

Passive switch (relay)

Active switch output

8 to 12 V DC according to power supply, up to 400 mA

LTE FFD

Cat.1, 3GPP

Passive / active input

−30 V to +30 V DC

EU LTE bandwidths

Part Nos. 9155401C-E, 9155401CB-E

Telit LE910-EU1 module

US LTE bandwidths

Part Nos. 9155401C-U1, 9155401CB-U1

Telit LE910-NA1 module

Bluetooth

in compliance with BLE (Bluetooth Low Energy)

Security

Encoding:

Range

Adjustable:

RX sensitivity

up to –93 dBm

Consumption

20 mA at 12 V DC

Operating temperature

–40 °C ~ +60 °C

Storing temperature

–40 °C ~ +70 °C

Dimensions

97 x 105 x 30 mm

Support of mobile applications

Android 10.0 and higher, iOS 17.0 and higher

Resolution

78 dB (for 1 kHz, distance 1 m)

Slideshow mode resolution

214 × 320 px, 214 x 214 px

Contrast ratio

400 : 1

Brightness

78 dB (for 1 kHz, distance 1 m)

Viewing angle

80° from all directions

Weight

280 g

Minimum consumption

1.36 W

Maximum consumption

2.40 W

Operating temperature

–20°C to 60°C

Resistance level

IK07

Directory

residential / business (for 10 000 users)

Dimensions

43 x 31.5 x 1.5 mm

Cover

Robust zinc casting with surface finish (minor surface shade nuances are acceptable).

Body material

Versions:

Surface installation dimensions

One-module

107 x 130 x 28 mm

Two-module

107 x 234 x 28 mm

Flush installation dimensions

Frame – one-module

130 x 153 x 5 mm

Frame – two-module

130 x 257 x 5 mm

Box (minimum wall hole) – one-module

108 x 131 x 45 mm

Box (minimum wall hole) – two-module

108 x 238 x 45 mm

Weight (depending on configuration)

Max. net

2 kg

Max. gross

2.5 kg

Operating temperature

−40 °C to 60 °C

Relative humidity

10 to 95 % (non-condensing)

Storing temperature

−40 °C to 70 °C

Protection class

IP54

Resistance level

IK08