If you don’t have a 2N Media Library account, please fill in the online registration form and apply for access.
Please note, that access to the Media Library is exclusive to authorized representatives of 2N business partners. Therefore your request will be reviewed and approved by 2N.
Whether you’re looking for a catalogue detailing our apartment intercom system solutions or want a data sheet for the 2N IP Style, everything is below. Search, find, download, share!
2N OS version 2.50.1 for 2N Intercoms includes the following changes
Essential Corrections
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Added support for a new Vbus display revision.
Improved ACS connection stability.
Updated several internal libraries.
Important bug fixes.
2N OS version 2.50.0 for 2N Intercoms includes the following changes
Precautions to be taken during update to FW version 2.50.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
Due to essential authentication updates for an improved user experience, you must restart the ACS server to restore connectivity for devices upgraded from a version lower than 2.49.0 to version 2.49.0 or higher.
New Functions and Improvements
Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
2N OS version 3.2.0 for 2N Intercoms includes the following changes
New Functions and Improvements
IP Style, IP Verso 2.0, IP One, and IP Force 2.0 can now be updated through AXIS Camera Station.
Improved camera image quality with new fisheye corrections. Users can adjust `Custom Image Crop` and toggle `Fisheye Correction` in `Customization > Camera > Internal Camera` to achieve the desired angle of view. Note that `Custom Image Crop` changes are only applied after a stream restart.
Added `Enlarge Bluetooth Button When Idle` option to `Customization > Display > Touchscreen` in IP Style. The Bluetooth button enlarges when the display is idle and a user with the My2N app is detected within range.
Added support for SHA-256 / RFC 8760 to SIP.
Improved the phone number creation dialog for better usability.
Redesigned the `Access > Access Rules` section for an improved user experience.
Added the ability to bypass on-device access control via `Integration > Access Control > Override`; available modes include:
2N on-device access control: Device is managed by 2N access control.
Genetec Synergis: Device is managed by Genetec Synergis access control.
Axis access control: Device is managed by Axis access control.
Essential Corrections
Improved ACS connection stability.
Fixed a memory leak in Automation.
Improved Force 2.0 camera exposure stability.
Added and corrected `originator` parameter values in `DtmfEntered` and `SwitchStateChanged` events to accurately reflect the action origin.
Added support for a new Vbus display revision.
Improved configuration import speed and stability.
2N OS version 3.1.0 for 2N Intercoms includes the following changes
Precautions to be taken during update to FW version 3.1.x
Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Customization > Audio > Startup and Network States Signalization`.
It may be necessary to refresh the webpage to access the login screen when updating from older firmware because this version generates new device certificates.
New Functions and Improvements
The Privacy Masking feature is now also available for IP One.
Essential Corrections
Improved stability when using 2N Electronic Locks.
Fixed the detection algorithm for logical loops in Automation.
Improved SMTP compatibility.
SIP registration should no longer get stuck in an unregistered state.
Fixed a rare issue that prevented SIP registration to My2N.
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Automation functions containing the ProfileStateChanged block no longer return an error after reboot.
2N OS version 3.0.2 for 2N Intercoms includes the following changes
Important update notice
If you are updating from version 3.0.0, the new web interface cannot download firmware from the update server. Update the device using the old web interface or manually upload a newer firmware file.
Essential Corrections
Fixed an issue that prevented downloading a new firmware from the update server via the new web interface. As a workaround when updating from version 3.0.0, use the old web interface or manually upload a newer firmware file to the device.
Important bug fixes.
2N OS version 3.0.0 for 2N Intercoms includes the following changes
Precautions to be taken during update to FW version 3.0.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
Introducing the MVP of our new graphical interface
We are excited to deliver the first Minimum Viable Product of our redesigned graphical interface. This initial release brings several impactful improvements that make everyday work smoother and more intuitive. Among the most notable additions are guided wizards, an enhanced search experience, and other usability upgrades aimed at significantly improving overall user interaction.
Because this is an MVP, some features are still in development. We will continue to refine, expand, and optimize the interface over the coming updates to ensure it reaches its full potential as quickly as possible.
Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
2N OS version 2.50.0 for 2N Intercoms includes the following changes
Precautions to be taken during update to FW version 2.50.x
Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Hardware > Audio > Startup and Network States Signalization`.
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks.
STUN support has been added and can be configured under `Calling > SIP # > Configuration`.
Added support for the Japanese language in the display UI of Answering Units and IP Style.
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Improved compatibility of outgoing H.264 and H.265 video streams.
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices.
Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices.
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures.
Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots.
Resolved a device crash that could occur when sending emails using specific SMTP server configurations.
The `snmpget` function now works correctly on devices using SNMPv3.
Devices now correctly process `Too Brief` SIP responses during registration and immediately apply the updated expiry period.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
PEAP MSCHAPv2 authentication is now fully functional and reliable across all supported models.
Eliminated a condition that could cause SIP registration to become permanently stuck in the unregistered state.
2N OS version 2.49.1 for 2N Intercoms includes the following changes
Essential Corrections
Updated an internal library containing critical vulnerabilities.
Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
Important bug fixes.
2N OS version 2.49.0 for 2N Intercoms includes the following changes
Precautions to be taken during update to FW version 2.49.x
Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
The administrator account now accepts "root" as a valid username as well.
AXIS Camera Station integration has been significantly improved:
The ACS tab in the web interface is now renamed to AXIS.
AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
After the initial login to the web interface, the "root" username can also be used for ACS access.
An optional dedicated ACS account is now available.
If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
2N IP Utility can now also be used to configure IP settings after the default password has been changed.
The `Enter PIN` button on the IP Style home screen is now blue to help distinguish it from call-related buttons.
Separate parameters are now available to independently enable and select modes for both License Plate Recognition and Character Trimming.
2N OS is now fully compatible with and certified for Lenel OnGuard 8.3.
Native integration with Microsoft Teams has been added, allowing bidirectional calling with our devices and enabling door unlocking directly from the Teams client. Configuration is available via Services > Integration > MS Teams.
Essential Corrections
Updated several internal libraries.
Improved precision of WaveKey-based door unlocking.
Enhanced SMTP reliability.
Syslog now correctly logs initial packets after reboot.
Improved overall SIP performance and stability.
`/api/accesspoint/grantaccess` now activates the configured Door Switch instead of always triggering Switch 1.
Valid credentials are now correctly logged as `valid=true` even when an extender (e.g., RFID) is not set as Door Entry.
Improved access signalization for invalid Access Validity periods.
Automation now supports the newly added SIP accounts 3 and 4.
Auto Provisioning now runs at the configured time, using the correct timezone offset.
QR codes are now transmitted correctly to Genetec Synergis as cards.
2N OS version 2.49.1 for 2N Intercoms includes the following changes
Essential Corrections
Updated an internal library containing critical vulnerabilities.
Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
Important bug fixes.
2N OS version 2.49.0 for 2N Intercoms includes the following changes
Precautions to be taken during update to FW version 2.49.x
Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
The administrator account now accepts "root" as a valid username as well.
AXIS Camera Station integration has been significantly improved:
The ACS tab in the web interface is now renamed to AXIS.
AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
After the initial login to the web interface, the "root" username can also be used for ACS access.
An optional dedicated ACS account is now available.
If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
2N IP Utility can now also be used to configure IP settings after the default password has been changed.
The `Enter PIN` button on the IP Style home screen is now blue to help distinguish it from call-related buttons.
Separate parameters are now available to independently enable and select modes for both License Plate Recognition and Character Trimming.
2N OS is now fully compatible with and certified for Lenel OnGuard 8.3.
Native integration with Microsoft Teams has been added, allowing bidirectional calling with our devices and enabling door unlocking directly from the Teams client. Configuration is available via Services > Integration > MS Teams.
Essential Corrections
Updated several internal libraries.
Improved precision of WaveKey-based door unlocking.
Enhanced SMTP reliability.
Syslog now correctly logs initial packets after reboot.
Improved overall SIP performance and stability.
`/api/accesspoint/grantaccess` now activates the configured Door Switch instead of always triggering Switch 1.
Valid credentials are now correctly logged as `valid=true` even when an extender (e.g., RFID) is not set as Door Entry.
Improved access signalization for invalid Access Validity periods.
Automation now supports the newly added SIP accounts 3 and 4.
Auto Provisioning now runs at the configured time, using the correct timezone offset.
QR codes are now transmitted correctly to Genetec Synergis as cards.