2N® EasyGate IP
The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N® EasyGate IP. Connect an analogue lift communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre. If you are using an old mobile network for emergency communication, you can continue to do so. When you’re ready to transition to 4G, all you’ll need is a single click in settings. The gateway also supports VoIP (SIP) technology, which is the only technology to guarantee reliable transmission of a DTMF signal.
- 2G, 3G and 4G support
- Reliable transmission of DTMF
- VoIP is the future
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
2G, 3G and 4G supportThe gateway supports 2G, 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
-
Reliable transmission of DTMF2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the lift.
-
VoIP is the futureChange all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
-
For use in any lift shaftA sturdy cover, operating temperature of up to 85 °C, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any lift shaft.
-
Backup operation using battery powerThe 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.
-
Configuration in 2 minutesAny technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
-
Remote administration and monitoringWith our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the lift communication market.
-
Variant with a modemSome lift devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
Show more
Technical Specification
| Cellular network | |
| 4G LTE bands: | EU (EC21-E): B1/B3/B5/B7/B8/B20 AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40 |
| UMTS/WCDMA bands: | EU (EC21-E): 850/900/2100 MHz AU (EC21-AU): 850/900/1900/2100 MHz |
| GSM bands: | EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz |
| SIM cards: | 2 slots, both support 3 V and 1.8 V SIM cards |
| VoIP | |
| Protocols: | SIP (RFC3261) over UDP, SIPs, SRTP |
| DTMF: | a) In-band |
| Analogy of traditional DTMF, where tones are merged with speech into single voice channel. | |
| b) SIP INFO (RFC 2976) | |
| DTMF signals are sent separately in the SIP message body | |
| Antenna | |
| Connector type: | SMA |
| Impedance: | 50 Ohms |
| Line interface | |
| Interface type: | FXS with screw terminal blocks |
| Power source | |
| Power adapter: | (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source |
| Backup power: | 4×AA batteries, constantly monitored |
| Configuration and upgrade | |
| Local: | web UI over USB |
| Cloud: | 2N® Elevator Center |
| Other | |
| Dimensions: | 195 × 119 × 61 mm |
| Weight: | 600 g |
| Humidity: | max 90%, non condensing |
| IP coverage: | IP43 |
| Operating temperature: | -40°C to +85°C |
| Status LEDs: | power, cellular network, FXS line, data, signal strength |
| Certifications: | EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016 |
| FCC Part 15b, UL 62368-1, PTCRB | |
| ICES-003 Issue 6, CSA C22.2 No.62368-1 | |
| AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ | |
Show more
Typical Usage
Technical area 
Case Study
Example of Typical Connection
Technical Specification
| Cellular network | |
| 4G LTE bands: | EU (EC21-E): B1/B3/B5/B7/B8/B20 AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40 |
| UMTS/WCDMA bands: | EU (EC21-E): 850/900/2100 MHz AU (EC21-AU): 850/900/1900/2100 MHz |
| GSM bands: | EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz |
| SIM cards: | 2 slots, both support 3 V and 1.8 V SIM cards |
| VoIP | |
| Protocols: | SIP (RFC3261) over UDP, SIPs, SRTP |
| DTMF: | a) In-band |
| Analogy of traditional DTMF, where tones are merged with speech into single voice channel. | |
| b) SIP INFO (RFC 2976) | |
| DTMF signals are sent separately in the SIP message body | |
| Antenna | |
| Connector type: | SMA |
| Impedance: | 50 Ohms |
| Line interface | |
| Interface type: | FXS with screw terminal blocks |
| Power source | |
| Power adapter: | (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source |
| Backup power: | 4×AA batteries, constantly monitored |
| Configuration and upgrade | |
| Local: | web UI over USB |
| Cloud: | 2N® Elevator Center |
| Other | |
| Dimensions: | 195 × 119 × 61 mm |
| Weight: | 600 g |
| Humidity: | max 90%, non condensing |
| IP coverage: | IP43 |
| Operating temperature: | -40°C to +85°C |
| Status LEDs: | power, cellular network, FXS line, data, signal strength |
| Certifications: | EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016 |
| FCC Part 15b, UL 62368-1, PTCRB | |
| ICES-003 Issue 6, CSA C22.2 No.62368-1 | |
| AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ | |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- 2G, 3G and 4G supportThe gateway supports 2G, 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
- Reliable transmission of DTMF2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the lift.
- VoIP is the futureChange all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
- For use in any lift shaftA sturdy cover, operating temperature of up to 85 °C, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any lift shaft.
- Backup operation using battery powerThe 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.
- Configuration in 2 minutesAny technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
- Remote administration and monitoringWith our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the lift communication market.
- Variant with a modemSome lift devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
Show more
Technical Specification
| Cellular network | |
| 4G LTE bands: | EU (EC21-E): B1/B3/B5/B7/B8/B20 AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40 |
| UMTS/WCDMA bands: | EU (EC21-E): 850/900/2100 MHz AU (EC21-AU): 850/900/1900/2100 MHz |
| GSM bands: | EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz |
| SIM cards: | 2 slots, both support 3 V and 1.8 V SIM cards |
| VoIP | |
| Protocols: | SIP (RFC3261) over UDP, SIPs, SRTP |
| DTMF: | a) In-band |
| Analogy of traditional DTMF, where tones are merged with speech into single voice channel. | |
| b) SIP INFO (RFC 2976) | |
| DTMF signals are sent separately in the SIP message body | |
| Antenna | |
| Connector type: | SMA |
| Impedance: | 50 Ohms |
| Line interface | |
| Interface type: | FXS with screw terminal blocks |
| Power source | |
| Power adapter: | (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source |
| Backup power: | 4×AA batteries, constantly monitored |
| Configuration and upgrade | |
| Local: | web UI over USB |
| Cloud: | 2N® Elevator Center |
| Other | |
| Dimensions: | 195 × 119 × 61 mm |
| Weight: | 600 g |
| Humidity: | max 90%, non condensing |
| IP coverage: | IP43 |
| Operating temperature: | -40°C to +85°C |
| Status LEDs: | power, cellular network, FXS line, data, signal strength |
| Certifications: | EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016 |
| FCC Part 15b, UL 62368-1, PTCRB | |
| ICES-003 Issue 6, CSA C22.2 No.62368-1 | |
| AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ | |
Show more
