Skip to Content
2N

2N Access Unit M

The 2N Access Unit M is the ideal reader for offices. Its controller is built-in and all you need to connect and power the device is a single UTP cable. Thanks to its compact design, you can easily install the unit on a door frame. Choose from several versions – RFID, RFID combined with mobile access via Bluetooth, or RFID with a keypad, which is perfect for projects that require two-factor authentication. Show in 3D

  • Slimline design
  • Fastest mobile access
  • Controller and reader in one
About

Features & Benefits

  • Slimline design
    The reader’s slimline design is ideal for installation on the door frame at the entrance to a meeting room. However, it will come in handy wherever you’re short on space.
  • Fastest mobile access
    With our WaveKey Bluetooth technology, users only need 0.3 of a second to gain access. What’s more, this is the securest method of access on the market.
  • Controller and reader in one
    Don’t worry about looking for a place to put the controller plus save on cabling. Our reader has full smart technology built in. In addition, it works without the need to communicate with a server.
  • Perfect for the office or outdoor
    The glass front panel will be scratch-free even after five years of daily use. With an IP55 protection coverage, you can install the reader outside. Despite all this, the units remain affordable.
  • Quick installation
    Install the reader in 4 minutes. Drill three holes in the frame, feed through the UTP cable, connect the lock and screw it in place. It couldn’t be any quicker.
  • Encrypted two-way communication
    The reader securely communicates with the web interface, with 2N® Access Commander administration software and the 2N® Mobile Key mobile application.
Show more

Technical Parameters

Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit M
Audio: buzzer, 1 W/8ohm
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth
Version: compatible with Bluetooth 5.0 LE
Range: (short - typically up to 3m*, long - typically up to 10m*)
*distances should serve only as an approximate guide and may vary depending on the phone model and installation environment
Security: RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:
up to 94.8 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies 125 kHz and 13.56 MHz
Supported card types card type compatibility depends on Order No.
125 kHz EM4xxx
13.56 MHz ISO14443A, FeliCa, ST SR(IX), NFC (2N® Mobile Key)
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical Properties
Cover: tempered glass with durable plastic
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions (surface mounted): 50 (W) x 133 (H) x 27 (D) mm
Weight: max 0.5 kg
Cover rating: IP55 and IK07
Show more

Try out the 2N Project Designer

Simply enter your requirements and our intuitive project planning tool will help you choose the right products.

Typical Usage

All you need to know about the 2N Access Unit M in 3 minutes

Watch the video

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Licenses

Find out the detailed description of product licensing policy.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit M
Audio: buzzer, 1 W/8ohm
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth
Version: compatible with Bluetooth 5.0 LE
Range: (short - typically up to 3m*, long - typically up to 10m*)
*distances should serve only as an approximate guide and may vary depending on the phone model and installation environment
Security: RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:
up to 94.8 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies 125 kHz and 13.56 MHz
Supported card types card type compatibility depends on Order No.
125 kHz EM4xxx
13.56 MHz ISO14443A, FeliCa, ST SR(IX), NFC (2N® Mobile Key)
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical Properties
Cover: tempered glass with durable plastic
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions (surface mounted): 50 (W) x 133 (H) x 27 (D) mm
Weight: max 0.5 kg
Cover rating: IP55 and IK07
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Extension Accessories

Security Relay Order No.: 9159010 Learn more
External IP Relay - 1 Output, 1 Input Order No.: 9137410E Learn more
External IP relay - 4 Outputs, 0 Input Order No.: 9137411E Learn more
Exit Button Order No.: 9159013 Learn more
Magnetic Door Contact Order No.: 9159012 Learn more
NVT PoLRE LPC Switch (with 2 adapters) Order No.: 1120103 Learn more
NVT PhyLink Adapter (pack of 6 adapters) Order No.: 1120104 Learn more
2N® 2Wire Order No.: 9159014EU Learn more
MIFARE® DESFire EV3 4K card Order No.: 11202601 Learn more
MIFARE® DESFire EV3 4K keyfob Order No.: 11202602 Learn more
EM4100 RFID Card, 125kHz Order No.: 9134165E Learn more
Mifare Classic 1K RFID Card, 13.56MHz Order No.: 9134173 Learn more
EM4100 RFID Key Fob, 125kHz Order No.: 9134166E Learn more
Mifare Classic 1K RFID Key Fob, 13.56MHz Order No.: 9134174 Learn more
External RFID Card Reader 125kHz (USB) Order No.: 9137420E Learn more
External RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 9137421E Learn more
External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 9137424E Learn more
External Bluetooth Reader (USB) Order No.: 9137422E Learn more
AXIS A9188 Network I/O Relay Module for lifts Order No.: 9160501 Learn more

Locks and Door Strikes

Mini electronic door strike, series 5 Order No.: 11202101 Learn more
Mini electronic door strike, series 5 - long Order No.: 11202101-L Learn more
Mini electronic door strike with mechanical blocking, series 5 Order No.: 11202103 Learn more
Mini electronic door strike with mechanical blocking, series 5 - long Order No.: 11202103-L Learn more
Mini electronic door strike with hold-open mechanism, series 5 Order No.: 11202102 Learn more
Mini electronic door strike with hold-open mechanism, series 5 - long Order No.: 11202102-L Learn more
Mini electronic door strike with monitoring, series 5 Order No.: 11202104 Learn more
Mini electronic door strike with monitoring, series 5 - long Order No.: 11202104-L Learn more
Mini reverse electronic door strike, series 5 Order No.: 11202105 Learn more
Mini reverse electronic door strike, series 5 - long Order No.: 11202105-L Learn more
Mini reverse electronic door strike with monitoring, series 5 Order No.: 11202106 Learn more
Mini reverse electronic door strike with monitoring, series 5 - long Order No.: 11202106-L Learn more
Electromechanical lock SAM 7255 Order No.: 11202201 Learn more
Electromechanical lock SAM 7255 with monitoring Order No.: 11202201-M Learn more
Electromechanical lock SAM 9235 Order No.: 11202202 Learn more
Electromechanical lock SAM 9235 with monitoring Order No.: 11202202-M Learn more
Cable protector FX290 Order No.: 11202301 Learn more
Cable protector FX510 Order No.: 11202302 Learn more
Cable protector FX300G Order No.: 11202303 Learn more
Cable protector FX500G Order No.: 11202304 Learn more
Electromagnetic lock MEX100 Order No.: 11202107 Learn more
Magnetic strip P300RP Order No.: 11202501 Learn more
Automatic door opener ED100 Order No.: 11202401 Learn more

Power Supply

PoE Injector - EU Cable Order No.: 91378100E Learn more
12 V Power Supply - EU Adapter Order No.: 91341481E Learn more
SW Applications
Sales Area

Selling Propositions

  • Slimline design
    The reader’s slimline design is ideal for installation on the door frame at the entrance to a meeting room. However, it will come in handy wherever you’re short on space.
  • Fastest mobile access
    With our WaveKey Bluetooth technology, users only need 0.3 of a second to gain access. What’s more, this is the securest method of access on the market.
  • Controller and reader in one
    Don’t worry about looking for a place to put the controller plus save on cabling. Our reader has full smart technology built in. In addition, it works without the need to communicate with a server.
  • Perfect for the office or outdoor
    The glass front panel will be scratch-free even after five years of daily use. With an IP55 protection coverage, you can install the reader outside. Despite all this, the units remain affordable.
  • Quick installation
    Install the reader in 4 minutes. Drill three holes in the frame, feed through the UTP cable, connect the lock and screw it in place. It couldn’t be any quicker.
  • Encrypted two-way communication
    The reader securely communicates with the web interface, with 2N® Access Commander administration software and the 2N® Mobile Key mobile application.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector

Try out the 2N Project Designer

Simply enter your requirements and our intuitive project planning tool will help you choose the right products.

Technical Parameters

Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit M
Audio: buzzer, 1 W/8ohm
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth
Version: compatible with Bluetooth 5.0 LE
Range: (short - typically up to 3m*, long - typically up to 10m*)
*distances should serve only as an approximate guide and may vary depending on the phone model and installation environment
Security: RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:
up to 94.8 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies 125 kHz and 13.56 MHz
Supported card types card type compatibility depends on Order No.
125 kHz EM4xxx
13.56 MHz ISO14443A, FeliCa, ST SR(IX), NFC (2N® Mobile Key)
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical Properties
Cover: tempered glass with durable plastic
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions (surface mounted): 50 (W) x 133 (H) x 27 (D) mm
Weight: max 0.5 kg
Cover rating: IP55 and IK07
Show more

Documents

Marketing documentation
Request information