13.56 MHz Internal RFID Card Reader, Wiegand
The Internal RFID Card Reader 13.56 MHz (Part No. 9151031, 02522-001) is used for reading RFID card Ids in the 13.56 MHz band, NFC supported.
Specification
Card Reader
Operating frequency: 13.56 MHz
Minimum reading distance: 30 mm above the 2N IP Force surface
Relay (SSR A, SSR B)
NO contact max. 30 V / 1 A AC/DC
Switched output
9.8 to 13.8 V DC according to power supply (PoE: 11.6 V; adapter: supply voltage minus 0,4 V), up to 400 mA
Logical inputs
Active mode – requires external voltage (jumper JP1 for IN1, pins 3–4 are open, jumper JP1 for IN2, pins 1–2 are open)
UIN-ON = min. +2.5 V
UIN-OFF = max. +1.5 V
UIN max. = +48 V
IIN (UIN +48 V) = max. 1 mA
Passive mode – requires external contact only (jumper JP1 for IN1, pins 3–4 are open, jumper JP1 for IN2, pins 1–2 are open)
UIN1 = approx. 8.3 V
UIN2 = approx. 8.3 V
ILOOP = approx. 0.5 mA
Signaling output
Internal red LED under the intercom front panel
Power Supply
For external RFID card reader
12 V DC ± 15% / 350 mA
WIEGAND interface
Off/Input/Output (as programmed)
Wiegand Input Technical Parameters | |
|---|---|
Current | 5 mA |
Input resistance | 680 Ω |
Pulse length | 50 μs |
Inter-pulse interval | approx. 2 ms |
Module Settings
Refer to the Configuration Manual for details of Wiegand, output and reader settings. Refer to the Automation manual for input, red LED and tamper switch settings and use.