Fingerprint Enrollment
Each user can enroll up to 2 fingerprints.Use an external fingerprint reader for enrollment. Make sure you have installed the 2N USB Driver. The driver can be downloaded here.
The enrolled user fingerprint can be used for the following actions:
Open the door;
Trigger silent alarm – can only be set if the Open door function is active;
F1 and F2 automation – generates the FingerEntered event in Automation. F1 and F2 help distinguish the scanned finger in Automation.
Make sure that the USB fingerprint reader is enabled in .
Select Fingerprint authentication
in the user settings on the Credentials card.Select the finger to be scanned and enrolled.
The Fingerprint enrollment box is displayed.
Put the selected finger on the reader. Repeat this step 3 times, always upon invitation.
You will be informed that your fingerprint has been scanned successfully after the last scanning.
Click Create to complete the process.