2N LiftIP 2.0

The 2N LiftIP 2.0 is a unique IP-based elevator emergency communicator that uses VoIP technology to transmit calls from a elevator cabin to the call centre or control room. The IP technology allows you to have the communicator under constant monitoring as well as letting you manage it remotely and power it via PoE. The option of automatic configuration in the form of predefined configuration templates makes 2N LiftIP 2.0 a truly plug-and-play solution.

This product is not sold through the Axis distribution network, please contact our representative by completing the form.

Contact Our Specialists

IP-based elevator emergency communicator
Remote management & configuration
Alarm calls tied to video
Data protection & network security

Next (5)

Versions

2N LiftIP 2.0 COP Unit – Flush mounting, with button

2N Lift IP 2.0 with emergency physical button

2N LiftIP 2.0 COP Unit – Flush mounting, without button

Silver 2N Lift IP 2.0 with a physical button for emergency call

2N LiftIP 2.0 TOC unit (without voice alarm station switch)

Front view of the 2N Lift IP 2 main unit, an IP intercom module for elevator communication.

2N LiftIP 2.0 COP unit

2N Lift IP 2.0 module with red wire connected to the left side of it

2N LiftIP 2.0 COP unit, cable version

2N Lift IP 2.0 module with four wires in different colors placed next to it

2N LiftIP 2.0 COP Unit – Flush mounting, with button

2N Lift IP 2.0 with a ringing button for emergency

Technical specifications

Power Supply

Type:

10 to 30V DC (keep polarity), 48V PoE

PoE:

802.3af (Class 0–12.95 W)

Consumption:

max. 2.5 W with integrated 16 Ω speaker, max. 3.5 W with external 4 Ω speaker (not included)
ALARM And CANCEL Voltage Input

Inputs:

5–48V DC (keep polarity), NC/NO contacts
Audio Parameters

Speaker:

Integrated speaker 16 Ω / 1W (output power 0.45 W), option to increase the output power to 2.3 W by connecting a speaker with 4 Ω impedance

Microphone:

Integrated, option to connect an external electret microphone

Audio:

G.711 (approx 90kbit/s)

Induction Loop Output:

3.35V RMS, output impedance 100 Ω

Codecs:

PCMU, PCMA, G.711 (approx. 90 kbps), L16, G.722 and G.729
Connection Of External Indicators

Voltage:

12 – 24V DC, external supply

Maximum Current:

200mA (100 mA if a bulb is used)
Mechanical Properties

Operating Temperature:

-20 to 50°C
Dimensions (W x H x D)

921640E, 92160XE – PCB version – hidden behind the COP:

65 × 130 × 24 mm

921618E, 921618BE – COP design version – flush mount:

100 × 220 × 26 mm

921619BE – COP design version – flush mount:

105 × 190 × 26 mm

921640E – TOC long version – for installation on top of car with Voice alarm station switch:

82 × 257 × 33 mm

921640XE – TOC short version – for installation on top of car without Voice alarm station switch:

82 × 186 × 33 mm