Device Configuration Interface Access
2N IP Force is configured via a web configuration interface. You have to know the device IP address or the device domain name. Make sure that the device is connected to the local IP network and powered.
Refer to the Configuration Manual for 2N IP Intercoms for the device configuration details.
Domain Name
Enter the device domain name as “hostname.local” to connect to the device. The hostname of a new device consists of the device name and serial number. Enter the serial number into the domain name without dashes. Change the hostname anytime in .
Default domain name 2N IP Force: 2NIPForce-{serial number without dashes}.local (e.g.: “2NIPForce-0000000001.local”)
Login based on a domain name is advantageous if the dynamic IP address is used. While the dynamic IP address changes, the domain name remains the same. It is possible to generate certificates signed by a trusted certification authority for the domain name.
IP address
To retrieve the device IP address, take the following steps, see :
Web Configuration Interface Login
Fill in the 2N IP Force address or domain name into the internet browser.
The login screen is now displayed.
Should the login screen fail to appear, make sure that you have typed the correct IP address, port or domain name. The login screen also does not appear when the administration web server is off. If you do not have a certificate generated for the IP address / domain name, an invalid security certificate warning may be displayed. In this case, you have to confirm that you want to go to the web configuration interface.
Enter the login data.
The default login data are:
Username: Admin
Password: 2n
It is necessary to change the password immediately upon the first login.
After login using the default password, the access to the web configuration interface functions is limited.
Tip
It is recommended that a password is used that is difficult to break. It is not recommended that names, places or things, especially those closely related to the user, are used in the password.
For increased password security, it is recommended that:
the random password generator is used,
the password length is 12 characters at least,
various characters from different character sets are combined (small/capital letters, digits, special characters, etc.).