2N Clip 2wire-IP
Retrofit-ready indoor station
2N Clip 2wire-IP Switch
Order number: 9138001
The switch is necessary for installing the 2N Clip 2wire-IP indoor station. You need one switch for each floor or every six 2N Clip 2wire-IP indoor stations. Conveniently, you can daisy-chain the switches to serve as many floors and apartments as needed.
Each switch needs a dedicated external power supply. We recommend using an external power supply (1120302) from our portfolio.
The switch is also compatible with the 2wire-IP NVT PhyLink adapter, available as a single unit (1120114) or in a six-pack (1120104) . It can be used alongside Ethernet-based devices such as intercoms, access readers, and indoor stations.
Each switch needs a dedicated external power supply. We recommend using an external power supply (1120302) from our portfolio.
The switch is also compatible with the 2wire-IP NVT PhyLink adapter, available as a single unit (1120114) or in a six-pack (1120104) . It can be used alongside Ethernet-based devices such as intercoms, access readers, and indoor stations.
Connectivity
The switch includes various ports. What can they be used for?
Installation
The switch is usually installed on a DIN rail directly in risers or in the standard circuit breaker box (9 positions for the switch and 4 positions for the power supply).
The switch includes various ports. What can they be used for?
- 6 ports for connection with 2N Clip 2wire-IP indoor stations
- 2 ports for daisy chain the switches
- 2 ethernet ports (one of them PoE) can be used to connect 2N IP devices (intercoms, readers, answering units), IP switches/routers, or they can also be used to daisy chain the 2N Clip 2wire-IP Switches
Installation
The switch is usually installed on a DIN rail directly in risers or in the standard circuit breaker box (9 positions for the switch and 4 positions for the power supply).
Technical specifications
/
-
Power Supply
- Type:
- external source, 48V DC, 1,92A
-
Interface
- Two wire:
- 6x 2wire-IP (max. 10Mbps data) powered for connection of 2N Clip 2wire-IP, 2x 2wire-IP (max. 100Mbps data) passive for connection of another 2N Clip 2wire-IP Switch
- LAN:
- 2x 100Base-TX, RJ-45
- PoE:
- one LAN port providing 802.3af Class 0 (up to 25W)
- USB Ports:
- unused (for service purposes only)
- Important note:
- always verify condition of the legacy cabling before use
- Recommended cabling:
- 24AWG
-
Mechanical Properties
- Dimensions (W x H x D):
- 155 x 88 x 59 mm
- Weight:
- 313g
- Operating temperature:
- -10 to 50°C
- Storage temperature:
- -20 to 70°C
- IP rating:
- IP20
- Mounting:
- DIN-rail mountable into the electrical switchboard
- Recommended altitude:
- 0 to 2000m
- Operating relative humidity:
- 10 to 90% (non-condensing)
-
Warranty
- 5-years warranty:
- See: https://www.2n.com/en_GB/support/warranty-and-repairs
Suitable for these products
Download
Declaration of Conformity