RFID Card Reader NFC Ready 13.56MHz, Wiegand

Order number: 9151031

An internal reader for RFID cards for installation in 2N IP Force. It allows the use of Mifare, HID iClass, DESFire and other standards, including NFC support – application for Android 2N Mobile Key. The reader reads the uID card serial number. It includes two switches, two logical inputs and the Wiegand interface. The reader is compatible with IP Force with two buttons and with models with pictograms. It also comes with a tamper switch for indicating open front panel.

Technical specifications

/
  • Includes:
    Wiegand interface, tamper switch, active output, relay, two inputs
    Wiegand interface:
    Input/Output mode, located on RFID card reader module
    Active switch output:
    9 up to 13 V DC depending on power supply (PoE: 9 V; adaptor: power supply voltage minus 1 V), max 600 mA
    Passive switch:
    NO/ NC contacts, up to 30 V / 1 A AC/DC
  • ISO/IEC 14443A:
    Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
    ISO/IEC 14443B:
    CEPAS, HID iCLASS
    JIS X 6319:
    Felica
    Smartphone:
    with Android 6.0 and higher
  • Operating Temperature:
    -40 to 55°C
    Storage Temperature:
    -40 to 70°C
    Operating relative humidity::
    10 % – 95 % (non-condensing)
  • 5-years warranty:
    See: https://www.2n.com/en_GB/support/warranty-and-repairs

Suitable for these products