Produktsupport 2N LiftGate

Ein IoT-Gateway, das einen herkömmlichen Aufzug in eine moderne IP-Lösung des 21. Jahrhunderts verwandelt.

Unterstützung für 2N Vertriebspartner

Support für andere Kunden

Anwendungen und Software
Firmware
Handbücher
Andere Dokumente
FAQs
Technische Daten
Video-Tutorials

Anwendungen und Software

Datei Name

Kategorie

Typ

SBOM - 2N EasyGate IP, 2N LiftGate.json

Software und Firmware

Software

Herunterladen

Veröffentlicht am:	01.11.2024
Größe der Datei:	61 kB
Typ	application/json

Firmware

Datei Name

Kategorie

Typ

Firmware 1.15.3 - 2N LiftGate - EU

Software und Firmware

Firmware

Herunterladen

Veröffentlicht am:	23.04.2026
Größe der Datei:	74 MB
Typ	application/x-zip-compressed

Release notes LiftGate

Version: 1.15.3

Final version: 1.15.3.0.4

Date of issue: 16.4.2026

New features and improvements:

Functionality ‘Fireman’ allows to use connected IP device as fireman communicator in lift, using SIP server in device (LIG2N-699)
Function to send message when batteries are going to be flat according to EN 81-28, necessary for TUV certification (LIG2N-715)
New version of wireless modules supporting with SDK used, security demand (LIG2N-745, 749, 750,
Restriction for SMS setting phone number can be applicated id demanded (LIG2N-783)
Default setting of wireless connection changed to roaming enable (LIG2N-753)
Added functionality needed for Open VPN certificate management – uploading, downloading, deleting (LIG2N-412)
Counter of LiftGate malfunction – resets because of module malfunction, LiftGate process crash, Daemon resets and user invoked reset (LIG2N-692, 693, 814)
When uploading of any file in progress, the selection menu is not displayed to avoid confusing of the user (LIG2N-769)
When battery disconnected, the information is displayed in Battery menu and parameters connected with battery are grey (LIG2N-755)
Adding parameters which can be set by SMS – parameters of DNS servers (LIG2N-780)
Defined format of configuration SMS – unification with EasyGate IP (LIG2N-826, 828)

Bugfixes:

High pulse load on DSL connection can generate disturbance on power source 48V resulting in block of PoE source - fixed (LIG2N-726)
When firmware upload is interrupted, the next upgrade can be performed only after device restart (LIG2N-582)
Damaged battery can be incorrectly detected, found zero capacity can induce zero dividing error resulting in wrong functionality (LIG2N-738)
Flooding log by error messages of Linux Avahi daemon (LIG2N-709)
Error in decoding of long SMS for configuration, now can be more commands sent in one SMS (LIG2N-756)
Protection against https certificate with incorrect format added (LIG2N-767)
Autometic change of IP address when connection thru WAN port changed, after reconnection is necessary to perform reset of device (LIG2N-459)
Incorrect signaling of battery capacity by LED Battery fixed (LIG2N-773)
Error with VoIP authentication (realm) fixed (LIG2N-816)

Version: 1.15.0

Final version: 1.15.0.0.4

Date of issue: 13.3.2025

New features and improvements:

Possibility to disable Ping service on LAN and WAN, default setting – disabled (LIG-631)
Open VPN supported on IPv6 (LIG-331)
Increased length of PIN for SIM, maximal length 8 digits (LIG-626)
Authorization PAP/CHAP added for wireless connection (LIG-649)
Multicast DNS ability (MDNS) added (LIG-697)
Configuration for comment during login to web interface according IEC-62443-4-2, CR 1.12 added (LIG-640)
Battery life time alert set to default value 730 days (LIG-509)

Bugfixes:

Battery management improvement, protection against overloading by comparing capacity and charge added (LIG-672, LIG-684, LIG-689)
Communication supported by VLAN between LAN port on central unit and WAN failed (LIG-703)
Redirecting router solicit message to LAN as multicast message to speed up connecting devices in LAN to WAN after switching connection to WAN (LAN-535)
Incorrect signaling of data connection after mobile network connection lost fixed (LIG-584, LIG-585, LIG-586)

Version: 1.14.0

Final version: 1.14.0.0.3

Date of issue: 25.10.2024

New features and improvements:

Specific configuration for Wurtec added (LIG-651)
Bridge mode for IPv.6 enabled in default configuration (LIG-656)
Battery low reporting improvement – both capacity and voltage considered (LIG-662)
Filtering of signal level messages in syslog – suppressing unimportant changes evidence to avoid syslog overload (LIG-665)
Battery management and syslog registration improvement (LIG-666, LIG-667, LIG-672, LIG-679, LIG-680, LIG-681)
Support for Verizon – certification, support for standard use for data connection (LIG-641)
Periodical refresh of data connection available by configuration (LIG-644)
Roaming enabled and XLAT disabled as default setting in ordering numbers for Cedes - 5024101E-CDS, 5024101US-CDS (LIG-642, LIG-646)

Bugfixes:

Failed connection in Verizon network fixed (LIG-635, LIG-654, LIG-655, LIG-647, LIG-660, LIG-661, LIG-664, LIG-673)

Version: 1.13.0

Final version: 1.13.0.0.6

Date of issue: 7.3.2024

New features and improvements:

VLAN support (LIG-606, 620, 627)
Improved monitoring by EC – network interface monitoring by websockets (LIG-615)
Time window for log – limited number of unsuccessful login (LIG-619)
IPv6/464XLAT technology selected as default setting (LIG-634)
Bugfixes:

Interrupted upload of FW can be restored after device reset – fixed (LIG-582)
Packed transfer by using 464XLAT (IPv.4/IPv.6) fixed – Zero Tier issue (LIG-633)

Version: 1.12.1

Final version: 1.12.1.0.4

Date of issue: 23.5.2023

New features and improvements:

Battery load regulation without battery temperature measuring (LIG-559)
Advertising of LAN IPv6 prefix to WAN to allow addressing of LAN devices thru WAN (RFC4191 type 24) (LIG-526)
Implementation of 464XLAT for IPv6 – Ipv4 connectivity support (LIG-510, 511, 512)
Events – wget support for IPv6 added (LIG-332)
Secure boot implemented (LIG-581)

Bugfixes:

Check for new version from Elevator center fixed (LIG-562)
Battery charger setting in boot section – fixed incorrect loading in short time period after power on or restart (LIG-564)
Incorrect ping to current DNS server fixed (LIG-528)
Error during selected SIM change fixed (LIG-533)
Network status message during roaming is not correct – home network signalized (LIG-536)
Routing error to WAN when mobile connection available fixed (LIG-479)
Roaming setting error fixed, when setting changed, she setting is active immediately (LIG-567)
When 4G technology selected and network fixing set the device is not able to register to the network – fixed (LIG-580)

Version: 1.11.0

Final version: 1.11.0.0.10

Date of issue: 17.1.2023

New features and improvements:

IPv6 support for connection to wireless network, LAN and WAN (LIG-232, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 453)
Module EC25-AF integration – prepared for AT&T and Verizon support in USA (LIG-422)
Security improvements – protection of ports against unauthorized access (LIG-465, 467)
Security improvements – tools and rights of processes in firmware (LIG-468, 470)
Security improvements – protection of secret data in device (LIG-471, 469, 474, 488, 493, 497)
Security improvement – Firmware protected by digital signature. Side effect – downgrade is not possible. (LIG-498)

Bugfixes:

Routing to WAN blocked when routing to wireless network set (LIG-479)
Keyword field option hide added (LIG-507)
Login credentials delayed after logout in web form (LIG-506)
Data after SIM switching initiated by SIM replacing occasionally blocked (LIG-522, 532)
DHCP error when connection technology changed or connection lost (LIG-521, 523)
SIP registration error when routing WAN-Wireless changed (LIG-525)
Incorrect log of error which doesn’t occur (LIG-531)

Version: 1.10.1

Final version: 1.10.1.10.18

Date of issue: 17.10.2022

New features and improvements:

Confirmation for factory default reset requested (LIG-354)
Open VPN – added logging by name and password (LIG-411)
Open VPN – possibility to load debug messages to syslog (LIG-413)
Open VPN updated to version 2.5
Change in data sent by events to My2N – decrease of message number (LIG-423)
Change in massaging of FW upgrade progress to have more precise information about upgrade in EC (LIG-424)
Persistent connection during configuration thru EC – keep alive packets added (LIG-431)
Charging current to battery optimalization to improve life duration of battery (LIG-433, LIG-440, LIG-447)
Support of null APN (LIG-314)
Improvement in temperature management (LIG-207, LIG-425, LIG-435)
Incoming voice call rejected – no destination for connect available (LIG-408)
Certificate renew driven by EC available (LIG-338)

Bugfixes:

Added hint for table Restriction for SMS (LIG-321)
Lost events when connection interrupted (LIG-430)
Time for start of version with EC25-AF is shorter – optimalization (LIG-415)
Protection against duplicity in static DHCP table (LIG-400)
Battery expiration is not signaled by LED nor web menu (LIG-388)
Missing board temperature actualization in status of LIG (LIG-437)
Routing from LAN to VPN error (LIG-448)
Incorrect signalization of blocked SIM (LIG-449)
Missing temperature range check for temperature limit (LIG-454)

Version: 1.10.0

Final version: 1.10.0.10.12

Date of issue: 24.1.2022

New features and improvements:

Connectivity to Elevator Center (EC) for remote access and configuration
US version with connectivity to AT&T and Verizon available
Setting mobile configuration from “voice centric” to “data centric”
Modification of LiftGate web – preliminary version replaced
Rx/Tx data counter for data flow registering added
Default route setting – mobile network, WAN backup

Bugfixes:

SIM2 reading error fixed
SIM PIN setting fixed
SSL library version updated – compatibility issue
Syslog to IP address fixed
Shorter connection time to EC after change of routing
Port forwarding to WAN fixed

Version: 1.9.0

Final version: 1.9.0.9.3

Date of issue: 28.5.2021

First customer version – basic functionality according manual

Download Versionshinweise

Neueste Handbücher

Installationshandbuch - 2N LiftGate (1.15.3)

Online

Herunterladen

Andere Dokumente

Filter

Kategorie

Marketing

Technisch

Sortieren nach

15 Ergebnisse

Datei Name

Kategorie

Typ

Firmware 1.15.3 - 2N LiftGate - EU

Software und Firmware

Firmware

Herunterladen

Veröffentlichungsdatum:	23.04.2026
Größe der Datei:	74 MB
Typ	application/x-zip-compressed

Release notes LiftGate

Version: 1.15.3

Final version: 1.15.3.0.4

Date of issue: 16.4.2026

New features and improvements:

Functionality ‘Fireman’ allows to use connected IP device as fireman communicator in lift, using SIP server in device (LIG2N-699)
Function to send message when batteries are going to be flat according to EN 81-28, necessary for TUV certification (LIG2N-715)
New version of wireless modules supporting with SDK used, security demand (LIG2N-745, 749, 750,
Restriction for SMS setting phone number can be applicated id demanded (LIG2N-783)
Default setting of wireless connection changed to roaming enable (LIG2N-753)
Added functionality needed for Open VPN certificate management – uploading, downloading, deleting (LIG2N-412)
Counter of LiftGate malfunction – resets because of module malfunction, LiftGate process crash, Daemon resets and user invoked reset (LIG2N-692, 693, 814)
When uploading of any file in progress, the selection menu is not displayed to avoid confusing of the user (LIG2N-769)
When battery disconnected, the information is displayed in Battery menu and parameters connected with battery are grey (LIG2N-755)
Adding parameters which can be set by SMS – parameters of DNS servers (LIG2N-780)
Defined format of configuration SMS – unification with EasyGate IP (LIG2N-826, 828)

Bugfixes:

High pulse load on DSL connection can generate disturbance on power source 48V resulting in block of PoE source - fixed (LIG2N-726)
When firmware upload is interrupted, the next upgrade can be performed only after device restart (LIG2N-582)
Damaged battery can be incorrectly detected, found zero capacity can induce zero dividing error resulting in wrong functionality (LIG2N-738)
Flooding log by error messages of Linux Avahi daemon (LIG2N-709)
Error in decoding of long SMS for configuration, now can be more commands sent in one SMS (LIG2N-756)
Protection against https certificate with incorrect format added (LIG2N-767)
Autometic change of IP address when connection thru WAN port changed, after reconnection is necessary to perform reset of device (LIG2N-459)
Incorrect signaling of battery capacity by LED Battery fixed (LIG2N-773)
Error with VoIP authentication (realm) fixed (LIG2N-816)

Version: 1.15.0

Final version: 1.15.0.0.4

Date of issue: 13.3.2025

New features and improvements:

Possibility to disable Ping service on LAN and WAN, default setting – disabled (LIG-631)
Open VPN supported on IPv6 (LIG-331)
Increased length of PIN for SIM, maximal length 8 digits (LIG-626)
Authorization PAP/CHAP added for wireless connection (LIG-649)
Multicast DNS ability (MDNS) added (LIG-697)
Configuration for comment during login to web interface according IEC-62443-4-2, CR 1.12 added (LIG-640)
Battery life time alert set to default value 730 days (LIG-509)

Bugfixes:

Battery management improvement, protection against overloading by comparing capacity and charge added (LIG-672, LIG-684, LIG-689)
Communication supported by VLAN between LAN port on central unit and WAN failed (LIG-703)
Redirecting router solicit message to LAN as multicast message to speed up connecting devices in LAN to WAN after switching connection to WAN (LAN-535)
Incorrect signaling of data connection after mobile network connection lost fixed (LIG-584, LIG-585, LIG-586)

Version: 1.14.0

Final version: 1.14.0.0.3

Date of issue: 25.10.2024

New features and improvements:

Specific configuration for Wurtec added (LIG-651)
Bridge mode for IPv.6 enabled in default configuration (LIG-656)
Battery low reporting improvement – both capacity and voltage considered (LIG-662)
Filtering of signal level messages in syslog – suppressing unimportant changes evidence to avoid syslog overload (LIG-665)
Battery management and syslog registration improvement (LIG-666, LIG-667, LIG-672, LIG-679, LIG-680, LIG-681)
Support for Verizon – certification, support for standard use for data connection (LIG-641)
Periodical refresh of data connection available by configuration (LIG-644)
Roaming enabled and XLAT disabled as default setting in ordering numbers for Cedes - 5024101E-CDS, 5024101US-CDS (LIG-642, LIG-646)

Bugfixes:

Failed connection in Verizon network fixed (LIG-635, LIG-654, LIG-655, LIG-647, LIG-660, LIG-661, LIG-664, LIG-673)

Version: 1.13.0

Final version: 1.13.0.0.6

Date of issue: 7.3.2024

New features and improvements:

VLAN support (LIG-606, 620, 627)
Improved monitoring by EC – network interface monitoring by websockets (LIG-615)
Time window for log – limited number of unsuccessful login (LIG-619)
IPv6/464XLAT technology selected as default setting (LIG-634)
Bugfixes:

Interrupted upload of FW can be restored after device reset – fixed (LIG-582)
Packed transfer by using 464XLAT (IPv.4/IPv.6) fixed – Zero Tier issue (LIG-633)

Version: 1.12.1

Final version: 1.12.1.0.4

Date of issue: 23.5.2023

New features and improvements:

Battery load regulation without battery temperature measuring (LIG-559)
Advertising of LAN IPv6 prefix to WAN to allow addressing of LAN devices thru WAN (RFC4191 type 24) (LIG-526)
Implementation of 464XLAT for IPv6 – Ipv4 connectivity support (LIG-510, 511, 512)
Events – wget support for IPv6 added (LIG-332)
Secure boot implemented (LIG-581)

Bugfixes:

Check for new version from Elevator center fixed (LIG-562)
Battery charger setting in boot section – fixed incorrect loading in short time period after power on or restart (LIG-564)
Incorrect ping to current DNS server fixed (LIG-528)
Error during selected SIM change fixed (LIG-533)
Network status message during roaming is not correct – home network signalized (LIG-536)
Routing error to WAN when mobile connection available fixed (LIG-479)
Roaming setting error fixed, when setting changed, she setting is active immediately (LIG-567)
When 4G technology selected and network fixing set the device is not able to register to the network – fixed (LIG-580)

Version: 1.11.0

Final version: 1.11.0.0.10

Date of issue: 17.1.2023

New features and improvements:

IPv6 support for connection to wireless network, LAN and WAN (LIG-232, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 453)
Module EC25-AF integration – prepared for AT&T and Verizon support in USA (LIG-422)
Security improvements – protection of ports against unauthorized access (LIG-465, 467)
Security improvements – tools and rights of processes in firmware (LIG-468, 470)
Security improvements – protection of secret data in device (LIG-471, 469, 474, 488, 493, 497)
Security improvement – Firmware protected by digital signature. Side effect – downgrade is not possible. (LIG-498)

Bugfixes:

Routing to WAN blocked when routing to wireless network set (LIG-479)
Keyword field option hide added (LIG-507)
Login credentials delayed after logout in web form (LIG-506)
Data after SIM switching initiated by SIM replacing occasionally blocked (LIG-522, 532)
DHCP error when connection technology changed or connection lost (LIG-521, 523)
SIP registration error when routing WAN-Wireless changed (LIG-525)
Incorrect log of error which doesn’t occur (LIG-531)

Version: 1.10.1

Final version: 1.10.1.10.18

Date of issue: 17.10.2022

New features and improvements:

Confirmation for factory default reset requested (LIG-354)
Open VPN – added logging by name and password (LIG-411)
Open VPN – possibility to load debug messages to syslog (LIG-413)
Open VPN updated to version 2.5
Change in data sent by events to My2N – decrease of message number (LIG-423)
Change in massaging of FW upgrade progress to have more precise information about upgrade in EC (LIG-424)
Persistent connection during configuration thru EC – keep alive packets added (LIG-431)
Charging current to battery optimalization to improve life duration of battery (LIG-433, LIG-440, LIG-447)
Support of null APN (LIG-314)
Improvement in temperature management (LIG-207, LIG-425, LIG-435)
Incoming voice call rejected – no destination for connect available (LIG-408)
Certificate renew driven by EC available (LIG-338)

Bugfixes:

Added hint for table Restriction for SMS (LIG-321)
Lost events when connection interrupted (LIG-430)
Time for start of version with EC25-AF is shorter – optimalization (LIG-415)
Protection against duplicity in static DHCP table (LIG-400)
Battery expiration is not signaled by LED nor web menu (LIG-388)
Missing board temperature actualization in status of LIG (LIG-437)
Routing from LAN to VPN error (LIG-448)
Incorrect signalization of blocked SIM (LIG-449)
Missing temperature range check for temperature limit (LIG-454)

Version: 1.10.0

Final version: 1.10.0.10.12

Date of issue: 24.1.2022

New features and improvements:

Connectivity to Elevator Center (EC) for remote access and configuration
US version with connectivity to AT&T and Verizon available
Setting mobile configuration from “voice centric” to “data centric”
Modification of LiftGate web – preliminary version replaced
Rx/Tx data counter for data flow registering added
Default route setting – mobile network, WAN backup

Bugfixes:

SIM2 reading error fixed
SIM PIN setting fixed
SSL library version updated – compatibility issue
Syslog to IP address fixed
Shorter connection time to EC after change of routing
Port forwarding to WAN fixed

Version: 1.9.0

Final version: 1.9.0.9.3

Date of issue: 28.5.2021

First customer version – basic functionality according manual

Download Versionshinweise

Aufzugssysteme - Katalog HQ (EN)

Marketing

Katalog

Herunterladen

Veröffentlichungsdatum:	09.10.2025
Größe der Datei:	19 MB
Typ	application/pdf

Cybersicherheit in Aufzügen (DE)

Marketing

Prospekte

Herunterladen

Veröffentlichungsdatum:	19.09.2025
Größe der Datei:	3 MB
Typ	application/pdf

Notfallkommunikation für Aufzüge - Merkblatt (DE)

Marketing

Prospekte

Herunterladen

Veröffentlichungsdatum:	04.06.2025
Größe der Datei:	2 MB
Typ	application/pdf

Produktbroschüren (DE) - 2N LiftGate

Marketing

Prospekte

Herunterladen

Veröffentlichungsdatum:	04.06.2025
Größe der Datei:	536 kB
Typ	application/pdf

Konformitätserklärung (EN) - 2N LiftGate

Technisch

Konformitätserklärung

Herunterladen

Veröffentlichungsdatum:	28.05.2025
Größe der Datei:	96 kB
Typ	application/pdf

Produktpräsentation (EN) - 2N Aufzug-Notfallkommunikation

Marketing

Präsentationen

Herunterladen

Veröffentlichungsdatum:	29.11.2024
Größe der Datei:	37 MB
Typ	application/vnd.openxmlformats-officedocument.presentationml.presentation

SBOM - 2N EasyGate IP, 2N LiftGate.json

Software und Firmware

Software

Herunterladen

Veröffentlichungsdatum:	01.11.2024
Größe der Datei:	61 kB
Typ	application/json

Aufzugssysteme - Katalog (EN)

Marketing

Katalog

Herunterladen

Veröffentlichungsdatum:	19.08.2024
Größe der Datei:	2 MB
Typ	application/pdf

CAD drawings elevator systems

Technisch

CAD und BIM

Herunterladen

Veröffentlichungsdatum:	30.07.2024
Größe der Datei:	20 MB
Typ	application/x-zip-compressed

Self-evaluation (EN) - IEC 62443-4-2

Technisch

Produktzertifizierung

Herunterladen

Veröffentlichungsdatum:	30.07.2024
Größe der Datei:	292 kB
Typ	application/pdf

Certificate (EN) - IEC 62443-4-1

Technisch

Produktzertifizierung

Herunterladen

Veröffentlichungsdatum:	30.07.2024
Größe der Datei:	543 kB
Typ	application/pdf

Mehr laden

Zurzeit sind keine FAQs für dieses Produkt verfügbar.

Technische Daten

Stromversorgung

Spannung:

100 - 230V AC

Frequenz:

50/60Hz

Stromzufuhr:

65W, für 2x Cabin Switch

Notstromversorgung:

eingebauter Bleiakkumulator, 12V, 9A, inklusive
Mobilfunknetz

GSM-Bänder:

EU (EGSM 900 MHz, GSM 1800 MHz), AU (EGSM 850/900 MHz, GSM 1800/1900 MHz)

UMTS Bänder:

EU (850/900/2100 MHz), AU (850/900/1900/2100 MHz), US (850/1700/1900 MHz)

LTE-Bänder:

EU (B1, B3, B5, B7, B8, B20), US (B2, B4, B5, B12, B13, B14, B66, B71), AU (B1, B3, B5, B7, B28, B40)

SIM-Karte:

2 Steckplätze, (U)SIM, 1.8V, 3V
Antenne

Anzahl:

2x (Main und Diversity)

Impedanz:

50Ω

Steckertyp:

F-SMA
Schnittstellen

LAN:

4x RJ-45, 1 Gbps (1x WAN, 3x LAN)

Unterstützte Protokolle:

IPv4, IPv6, ICMP, DNS, DHCP opt. 66, NAT, HTTP, HTTPS, WS, NTP, OpenVPN, Syslog

Eingänge:

2x 0 - 24 V (niedriger Pegel 0-2 V, hoher Pegel 4-24 V)

Relaisausgang:

2, NO/NC-Kontakte, COM Klemmleisten, max. 30 V / 1 A DC, max. 125 V / 0.3 A AC
Mechanische Eigenschaften

Betriebstemperatur:

-20 bis 50°C

Abmessungen (BxHxT):

270 × 240 × 80 mm

Schutzgrad:

IP20

Gewicht:

4,7 kg mit Akku, 2,2 kg ohne Akku

Zurzeit sind keine Video-Tutorials für dieses Produkt verfügbar.

Möchten Sie mit jemandem sprechen?

Unser Team ist für Sie da! Wählen Sie Ihre Region oder Ihren Schwerpunkt

Kundendienst
Unterstützung für 2N Distributoren und CIP
Produkt von einem 2N-Distributor gekauft
Gewährleistung und RMA

Chatten Sie mit einem Techniker

Um unseren Techniker zu kontaktieren, nutzen Sie bitte den Chat unten auf dieser Seite. Keine Bots: Sprechen Sie mit einem echten 2N-Techniker über unseren Live-Chat
Verfügbar von 9 Uhr bis 16:30 Uhr CET

Ruf uns an

Erreichbar von 9:00 bis 17:00 Uhr. MEZ (Mo-Fr).

Allgemein (Tschechisch & Englisch) +420 228 880 382
Vereinigtes Königreich +44 203 510 5770
Frankreich +33 1 88 89 02 98
Deutschland +49 4133 2029 999
Spanien +34 919 540 607
Italien +39 02 3055 9053

Kontaktformular

Füllen Sie unser Formular für technischen Support aus und jemand wird sich so schnell wie möglich bei Ihnen melden

Kontaktieren Sie uns

Supportportal für 2N Distributoren und CIP

Erstellen und verwalten Sie Ihre technischen Fälle.

Zum Supportportal

Telefonsupport

Bereiten Sie Ihre PIN vor und rufen Sie uns an:

Tschechisch +420 228 880 384*
Englisch +420 228 880 574*

* Verfügbar von 9:00 Uhr bis 17:00 Uhr EST

2N LiftIP 2.0

2N Lift1

2N Sentrio

2N Lift8

2N EasyGate IP

2N EasyGate IP+

2N Elevator Center

2N Call Center

2N Lift IP Service Tool

2N Lift8 Service Tool

2N Lift1 Service Tool

Produktsupport 2N LiftGate

Anwendungen und Software

Filter

Firmware

Filter

Release notes LiftGate

Neueste Handbücher

Installationshandbuch - 2N LiftGate (1.15.3)

Andere Dokumente

Filter

Release notes LiftGate

Technische Daten

Stromversorgung

Mobilfunknetz

Antenne

Schnittstellen

Mechanische Eigenschaften

Möchten Sie mit jemandem sprechen?

Chatten Sie mit einem Techniker

Ruf uns an

Kontaktformular

Supportportal für 2N Distributoren und CIP

Telefonsupport