Grandstream GXV3140 - How to set it up with a 2N IP Intercom
| Note: The IP addresses used will always vary depending on your network. In the example below, the IP address 192.168.3.165 for the 2N IP Intercom and the IP address 192.168.3.166 for the Grandstream GXV3140 are used. |
How to set up a 2N IP Intercom
Setting up the 2N IP Intercom is very easy. First, it is necessary to create a new user in the blue section directory and assign him a phone number - in our case it will be a direct call (peer to peer) to the GXV3140 phone. For this reason, we enter a phone number in the form sip:IP_address (or sip:x@IP_address), where IP_address is the IP address of the GXV3140 phone. The setting corresponds to the picture below.
In the next step, go to the "Calling -> SIP 1" section, enable the SIP 1 account and fill in the "Domain" field with the IP address of the 2N IP Intercom.
We can adjust the video codec settings and video resolution. These settings can be made in the section "Calling -> SIP 1-> Video" section, where you can set the maximum resolution for the given intercom model (VGA in this case for the 2N IP Verso intercom), change the frame rate and also the video bitrate. We also enable "Use sendrecv Attribute for Video" in the advanced SPD settings option.
Finally, we need to assign the user to the quick dial button of the 2N IP Intercom in the section "Calling -> Dialing-> Quick Dial Button".
How to set up a Grandstream GXV3140 IP Phone
Be sure to leave the Use Random Port field blank in this setting.
In the next picture you can find the SIP settings for Grandstream. Set the Local SIP Port to 5060.
In General Settings, you need to specify the IP address of the SIP server. This is the IP address of the 2N IP Intercom.
