Need help? Ask AI

Select Your Region and Language

EMEA

AMER

Asia | Pacific | Australia

How to configure call settings for the IP intercom from My2N platform

The steps in this article require using the web interface of a 2N device. Please follow this manual in case this is your first time using the web interface.

Prerequisites:

  • 2N IP intercom firmware version 2.32 or higher .

  • 2N IP intercom needs to be connected to the Internet .

  • 2N IP intercom needs to be set in Automatic mode in My2N.

  • Completed Step 2 - Where to call? - you need to have at least one other device already added to My2N (smartphone, tablet...).

 

Step by step guide

In My2N press button Devices and then click on the intercom device to access the configuration of the 2N IP intercom.

My2N_button_Devices 

Then click on Call Settings.

My2N_Call_settings 

 

A new window will appear. You will need to give a name to the label (1), this name will be visible in the device's directory. Then, you need to choose which device (smartphone, tablet or answering unit) you wish to call, when someone presses a dedicated button(2) of the 2N IP intercom. You can choose up to 10 destinations for each button (but only one apartment at the same time). Don't forget to save (3).

 

After you save your settings, the 2N IP intercom is configured by My2N immediately. Now you have successfully configured call settings for the 2N IP intercom. You can configure another one by repeating previous steps and choosing different intercom added in your My2N account.

All the buttons if they point to at least one destination will automatically pushed in the device's directory. They won't in case it is existing but not pointing to any destination.

Moreover, in automatic mode, the button number one will be automatically pushed to the main button of the intercom.

In the Old Web Interface:

In the New Web Interface:

 

Was this page helpful?